Construction of Vety. Dispensary building at Baila in Tehsil Sundernagar Distt. Mandi HP

Amount

Excavation in foundations, trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work and saturated soil , including chiseling or any other mixed variety of soil, dewatering and / or removal of slush and other incidentals, lift up to any height , stacking the excavated soil up to any leads , lifts clear from the edge of excavation and then returning the stacked soil in any thickness of layers when required in to plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth specified dumping place as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and belies in any height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials with in all leads ,lifts and other incidentals

Stair cases with slopping or stepped soffits excluding landing in all floor including carriage of materials with in all leads, lifts and other incidentals.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals.

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:4:8 (one cement: four sand: eight graded stone aggregates 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals..

Providing and laying Cement concrete 1:2:4 (one Cement :two Sand : four Graded stone aggregate 20mm ( twenty millimetre nominal size) mechanically mixed and vibated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Suspended floor roofs landings and shelves and their support balconies,beams,girders bressumers and cantilever upto floorany level including carriage of materials with in all leads, lifts and other incidentals.

Providing mild steel /Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry/polygonal rubble masonary (uncorsed/brought to cources) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded stone agreegate 20mm(Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand). including carriage of material within all leads, lifts and other incidentals .

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately). including carriage of material within all leads, lifts and other incidentals .

Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) including carriage of material within all leads, lifts and others incidentals .

Providing and laying granite stone in flooring 20mm ( twenty millimetre) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm ( twenty millimetre) .thick including carriage of material within all leads, lifts and others incidentals .

White glazed tiles 6 mm( six millimetre) thick in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry including carriage of material within all leads, lifts and others incidentals .

Providing and laying spartic ceremic tiles 5.5mm( five poin five millimetre ) .thick in flooring (300 x300mm. ( three hundred three millimetre ) size treads of steps laid on a bed of 12mm. ( twelove millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement including carriage of material within all leads, lifts and others incidentals .

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sisty six millimetre to two millimetre thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidentals .

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 4 mm ( four millimetre ) thick including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 0.60 mm(Zero point sixty milimetre) thick prepainted steel shees in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with pree painted iron J or L hocs, boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel shees in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hocs, boalts and nuts 6mm dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including carriage of material within all leads, lifts and other incidentals .

Providing and fixing 15 cm.( fifteen centimetre ) wide 45 cm. ( forty five centimetre ) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm ( forty xthree millimetre ) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design 0.63mm ( zero point sixty three millimetre ) thick sheet including carriage of material within all leads, lifts and other incidentals .

Steel work welded in built up sections, trusses and framed work including cutting, hosisting fxing in position and applying a priming coat of red lead paint.

In beams joists channels, angles, Tees, flats with connection plates or angle plates as in main and cross beams, hip and jack rafter, purlins connected to comman rafter and the like including carriage of material within all leads, lifts and other incidentals .

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position second class deodar wood including carriage of material within all leads, lifts and other incidentals .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 50 mm(fifty millimetre ) thick including carriage of material within all leads, lifts and other incidentals .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm ( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm( forty millimetre) thick second class deodar wood including carriage of material within all leads, lifts and other incidentals .

30 mm( thirty millimetre)

Providing and fixing M. S. grill of required pattern in wooden frame of window etc.with M.S. Flats, square or round bars with round head bolts and nuts or by screws (i) plain grill. including all leads , lifts and carriage of material and other incidentals.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete 300x16mm (three hundred x sixteen millimetre) including all leads , lifts and carriage of material and other incidentals.

Providing and fixing aluminum tower bolts (barrel type) anodized, transparent or dyed to required shade and colour with screws etc. omplete. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge

200x 10mm(two hundered x ten millimetre ).

150x10mm ( one hundred x ten millimetre )

Providing and fixing 100mm ( one hundrd millimetre ) aluminum handles anodized, transparent or dyed to required shade and colour with screws etc. complete including carriage of material and other incidentials

Providing and fixing 100mm ( one hundrd millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete .including carriage of material and other incidentials

Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm ( one hundrd fifty millimetre ) including carriage of material and other incidentials

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre ) in girth and finished even and smooth. in cement mortar 1:6 (one cement : six sand) (i) above plinth level upto floor two level. incidentals.

15mm(Fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre ) in girth and finished even and smooth. in cement mortar 1:6 (one cement : six sand) above plinth level upto floor any level. including carriage of material within all leads, lifts and others incidentals .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of material within all leads, lifts and others incidentals .

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material within all leads, lifts and others incidentals .

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including carriage of material within all leads, lifts and others incidentals .

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing with white lead for priming including carriage of material within all leads, lifts and others incidentals .

Painting two coats (excluding priming coat) on new wood and wood bassed surfaces with read mixed paint to give an even shade including cleaning the surface of all dirt, dust and other foregin matters sand papering and stoping with ready mixed paint other than white. including carriage of material within all leads, lifts and others incidentals .

Painting two coats (excluding priming coat) on new steel and other metal surfces surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters with ready mixed paint other than white. including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 100mm dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and others incidentals .

Providing plinth protection 50mm(Fifty milimetre) thick with cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm(Twenty milimetre) nominal size) including carriage of material within all leads, lifts and others incidentals .

Provding under layer for plinth protection of 75mm( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregate 40mm ( forty millimetre ) nominal size) well rammed and consolidated and grouted with fine sand including preparetion of ground. including carriage of material within all leads, lifts and others incidentals .

WS & SI Providing and fixing wall to ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) nominal bore.

Providing and fixing P.V.C. storage tank complete 40mm (forty millimeters ) nominal bore galvanized mild steel scour tube with flitting 25mm(twenty five millimeters ) nominal bore galvanized mild steel over flow tube with fitting and mosquito proof couplings of approved municipal design 15mm ( fifteen millimeters) nominal bore ball valve and mosquito proof coupling PVC cover and locking arrangement including providing pads of size as required for inlet and out let hole including hosting up to all height above ground level 1000 (one thousand liters) net capacity as per the direction of Engineer -in Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI marked including fixing with approved adhesive combide 110 mm( one hundred ten millimetre ) dia including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 110 mm( one hundred ten millimetre ) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 110 mm( one hundred ten millimetre ) dia PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 110 mm( one hundred ten millimetre ) dia PVC collars ISI marked including fixing with approved adhesive etc. complete. including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 110 mm( one hundred ten millimetre ) dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing PVC floor trap ISI marked self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 x 90 mm( one hundred ten x ninety millimetre ) dia including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately):- Ordinary closet including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers SOLID TYPEwhite plastic seat and cover including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm (five hundred fifty five millimetre x four hundred millimetre ) including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 32 mm ( thirty two millimetre ) dia C.P. Brass waste for wash basin or sink including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 600mm x 120 mm ( six hundred millimetre x one hundred twenty millimetre ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia CP bib tap ( long body ) with capstan head & flanges including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia with AeratorC.P Brass pillar tap with Capstan head including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia brass full way value with wheel within all leads , lifts of material and other incidentals .

Providing and fixing 32mm (thirty two millimetre ) dia PVC waste pipe within all leads , lifts of material and other incidentals .

Providing and fixing 15mm( fifteen millimetre ) dia nominal bore ( fifteen millimetre ) P.V.C connection pipe with brass unions within all leads , lifts of material and other incidentals ..

Providing and fixing 100mm ( one hundred millimetre ) dianominal bore ( one hundred millimetre ) C.P gratings within all leads , lifts of material and other incidentals ..

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws within all leads , lifts of material and other incidentals ..

Providing and fixing C.P jet with 1.5 mtr ( one point five metre ) PVC tube within all leads , lifts of material and other incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia C.P Brass pillar tap with Capstan head within all leads , lifts of material and other incidentals ..

Karam Singh

VIRENDER KUMAR

KRISHAN LAL

Nikhil Thakur