Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC 24 85 7 SANATH NAGAR GAJUWAKA VISAKHAPATNAM 530 026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹33.9 L+₹14,624.58 (0.43%)Rejected-AOC 38 41 28 104 AREA INDUSTRIAL ESTATE VISAKHAPATNAM 530007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L2 | Rejected-AOC Not admitted | |
| 3 | L3₹35.0 L+₹1.3 L (3.73%)Rejected-AOC | L3 | Rejected-AOC Not admitted | |
| 4 | L4₹35.4 L+₹1.7 L (5.13%)Rejected-AOC 66 6 410 1 MULAGANDA HOUSING COLONY GAJUWAKA DEPOT VISAKHAPATNAM 530026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L4 | Rejected-AOC Not admitted | |
| 5 | L5₹36.9 L+₹3.2 L (9.50%)Rejected-AOC | L5 | Rejected-AOC Not admitted |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
AS AND AS OF 1ST AND 2ND FLOOR AND ROOF TOP OF P-54 BUILDING INS VISWAKARMA VISAKHAPATNAM
2024_MES_640995_1
8358/E8/GEND
Open Tender
Civil Works
Item Rate
180 days
Visakhapatnam
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Naval Depot
₹84,000
Yes
14 May 2024
6 Feb 2024
8 Mar 2024
7 Feb 2024
6 Mar 2024
21 Feb 2024
Amount
Schedule 'A' Part -I (B/R)
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing them to store
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)
S & F Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square etc.
S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
Supplying and fixing in frame at site, factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE.
S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkhat.
Supply & fixed glavanized mild steel wire cloth with 0.46 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron).
Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
S&F for powder coating of any colour anodised alluminium window and door shutters, fixed type without sash bars, aluminium sections weighing 1.5 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2Nos) suitable handle (1 No) complete all as specified. (Minimum thickness of powder coating 50 micron).
S & F Factory made PVC Ventilator made out of multi chamber PVC hollow section DWUF 405 (40x46mm) awith 3mm pin headed glass fixed to the lower section using extruded PVC section of 9 x 19.5mm size OL 19 with EPDM gasket (SPL 003) for both PVC sections, ventilator's centre mullion shall be made up of multi chamber hollow PVC sectopm DWUF-406 (63.5x40mm) with EPDM gasket GL-19 and fixed to the 3 sides of DWUF-405 and DWUF-406 (63.5x40mm) above the centre mullion, Glass panels with aluminium lower set shall be fixed to the frame DWUF-405 on the top of the ventilator for the glass, DWUF 405 and DWUF 406 comers shall be mitred cut and welded, jointed with 12mm MS Rods, (Guard Bars) including necessary fixtures complete all as specified and directed.
S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane
S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane.
M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.
S&F mild steel flat iron of size 25x3mm as in hold fast
S & F in repair 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.
S & F in repair 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21.
S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
S & F in repair 100 mm long Aluminium, anodised, barrel tower bolts of extruded section
S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S & F in repair Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg
S&F in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed.
S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ( excluding flushing cistern and flush pipe ) fixed in repairs
S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S&F in repairs for 15 mm dia bore angle tap .
S&F in repairs for 15 mm dia bore 2 in 1 tap .
S&F in repairs PVC connection 15 mm bore 450 mm long
S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms).
S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges.
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.
S & F in repairs Brass CP mixer 15mm formixing hot & coldwater screwed down for iron pipe and fixed complete all as specified
S & F in repairs Toilet paper holder with flat recessedtype stainless steel Complete all as specified and directed
S & F in repairs Brass chromium plated shower rose 125mm size Complete all as specified and directed
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs15mm dia Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for r removal to store
Taking up or down 20 mm bore steel tubing and connections, including cleaning for removal to store
Taking up or down 25 mm bore CPVC Pipe and connections, including cleaning for Refixing or removal to store
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mm fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mm fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 25mm fittings on walls/ceiling or laying in floors complete all as specified.
Demolition and breaking up including removing salt glazed stoneware pipe 150mm bore (internal) with concrete bedding and haunching complete including necessary earth work as required all as specified and directed.
M&L for cement concrete bed to drain pipe 150mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed.
M&L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed.
Taking down rain water pipes including all fittings any size and pattern.
M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls .
M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls .
S/F 75 PVC(SWR) branch piece,single (single Y) equal or unequal with access door
S/F 110PVC(SWR) branch piece,single (single Y) equal or unequal with access door
S & F 75 mm dia.,PVC Bends (any Radius) with access door
S & F 110 mm dia., PVC Bends (any Radius) with access door
S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed
Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.
Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match oloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
Taking down of existinng roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @ 3 kg/sqm.(b) M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate on roof slab (c) Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).(d) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (e) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.(f) Applying a layer of APP based polymeric membrane, 3mm thick (minimum)Weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75 mm on longitudinal direction and sealing overlaps.(g) Applying evenly one coat of Aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane at 5th floor complete all as specified and directed
Taking down cement plaster on brick wall stone wall etc including raking out joints, hacking for key securing down with water etc
M&L, rendering 15 mm thick in cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement .
M&L, rendering 10 mm thick in cement mortar 1:6 on other than fair face of brick or surface finished even and smooth without using extra cement .
M&L, rendering 5 mm thick in cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement .
M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller upto 4th floor surfaces incl preparation of surfaces.
M&L for preparation of newly plastered surfacesof wall by Vaccum based sanding machine applying wall care putty (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturetr instruction.
M&L for Preperation of new plastered surface of ceiling applying three coat of white wash.
M&L for Green Marble work 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land
M&L for Pre-cast cement concrete block masonry with solid blocksType C-1 (1:3:6) 20mm graded crushed stone aggregate, exc. 10cm in width and setting in mortar1:6 complete all as specified.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm. Make : NIRALI/DIAMOND/JINDAL.
M & L fixing 19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber to timber frame work
M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where everrequired to give high gloss finish complete all as specified and directed
M&L Reinforeced cement concrete of Type B1 1:2:4(20 mm gradedaggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L Reinforeced cement concrete of Type B1 1:2:4(20 mm gradedaggregate) for Beams, cantilevers, bressumm ers, lintels over 1.5m s complete all as specified and directed
M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete.
M & L for TMT reinforcement 8 mm dia and over cut to length for stirrups bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete.
S&F of Plywood grade BWP, type BB 12mm thick complete all as spciefied and directed
M&L for complete removal of existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machine removal of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturetr instruction.
Fixing of kitchen plate rack Complete all as spciefied and directed
S & F Continuous (piano) hinges, brass, bright finish or electrogalvanised of 40mm flap width Complete all as specified and directed
Schedule 'A' Part -I (E/M)
M&L in repairs for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLS grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in and inciluding concealed/semi concealed PVC conduit not less than 20mm dia including for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes, metal box & cover plate of switch board for one light / fan point / Bell point / 5 Amps Socket same board controlled by one switch complete including taking down of old unsv point wiring Note- The PVC Conduit is to be Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and poining in cement mortar and making good for same unit rates are inculded for same
All same as per item No.1 above but for 5A socket point on independent board.
All same as per item No.1 above but for 15/16Amp switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified
S& F switch modular one way 6 Amps,1 module 230V complete all as specified and directed.
M&L for modular switch 1way 16 Amps, 1 module 230V of 1 module complete all as specified and directed.
M&L for modular socket outlet 3 pin, 6 Amp 2module 230V complete all as specified and directed.
M&L for modular socket outlet 3 pin, 15/16 Amp 2module 230V complete all as specified and directed.
S&F bell push modular, one way 6 Amps, 1 module 230V complete all as specified and directed.
S & F in replacement of calling bell AC 230V,complete as specified by Engg-in-Charge
Supply and fixing ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.
S & F in repairs moduler sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SPN, 20 Amps, 240 volts, 10 KA complete suitable for AC all as specified and directed.
S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 20 W (2000 Lumens) output, 5700 K of cool /warm white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.
S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 9 W (900 Lumens) output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.
S & F Security light LED type of 35 W Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted after taking down old unserviceable light complete all as specified and as directed by the Engineer-in-Charge.
Labour only for refixing of any type of serviceable LED luminaries obtain while taking town of any type of luminaries
Supply and fixing in replacement of Factory made sheet metal VTPN MCCB DBs double door (Fixed flush to the wall), with provision of MCCB as incommer & outgoing as TPN 415 volt, 8 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified.
Supply and fixing in replacement of Factory made TPN DB double door (Fixed flush to the wall), 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified.
S & F in repairs MCCB 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as directed
Supply and fixing of MCB 63Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, , complete all as specified
S&F MCB SP 6 to 32 Amps 240 Volts,10KA 'B' curve complete all as specified
S&F MCB SPN 40 Amps 240 Volts ,10KA 'B' curve complete all as specified
S&F MCB RCCB double pole 40 Amps 240 Volts ,10KA 'B' curve complete all as specified
S&F MCB DB 12 way SPN with 200 A rated bus bar, 240 Volts, Double door complete all as specified and directed by Engg-in-Charge
M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.
M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.
Taking down ceiling fan of any size from its position and doing complete overhauling of fan including 02 no canopy ,and refixing the same after repairs complete all as directed by Engr-in-Charge. .
Materials and labour for rewinding of ceiling Fan complete upto 1400 mm sweep with heavy duty super enameled copper winding wire of existing gauge including all insulation materials, varnishing, heating, greasing etc. cutting and removing the old burnt winding complete all as specified and as directed. Note:- replacement of unserviceable parts like capacitor, bearing, bush, hanging clamp, reel & nut bolt etc measured and paid separately.
Supply only Ball bearing for ceiling Fan No 6200 complete all as specified and as directed.
Supply only Gun metal bush suitable for upto1400 mm sweep ceiling Fan, complete all as specified and as directed.
Supply only Hanging clamp and Nut bolt with split pin for ceiling Fan complete all as specified and as directed.
Supply only Fan capacitor of capacity 2.5 mfd epoxy filled type complete all as specified and as directed.
Supply only Fan down rod upto 600 mm complete all as specified and as directed.
M&L for Repairs to fan shaft by filling metal, cutting by machine, Grinding, polishing complete and making good adequately for ceiling fans complete all as specified and as directed.
M & L for painting of Ceiling Fan complete upto 1400 mm sweep with one coat of white paint/existing fan using spray machine painting including cleaning, washing of surfaces complete all as directed.
S & F Single Phase Hot pressed SMC Meter box of size 250 x 250 x 155 mm with viewing glass , concealed hinge and earth bolt plugged complete all as specified and as directed. Make:-Sintex/ Hensel/ HPL or equivalent approved make
M&L Earthing complete with GI plate electrode 600x600x3.15mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion.
Supply and fixing copper earth strip of size 20x3 mm complete all as specified and directed.
Supply and fixing GI light grade pipe 40mm dia for cable protection including taking down old unsv cable protection pipe complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers
Supply and fix air ventilator made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm
M/S Jayalakshmi Constructions
Venkat Associates
GVR CONSTRUCTIONS
KUNDAN SAI ENTERPRISES
K NAGARAJU
SUPREET CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .