NIT NO. 26 ITEM NO. 02

Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor. Motor Detail: Motor Power: 5 HP, Voltage:415 Volt, F.L Current 9.5 amps ,Speed 2900 RPM, suitable for operation on 3 Ph., 50 Hz AC power supply. Pump Details: Pump Stage:21 Pump Operating Range: Head:122-70 mtrs ,Discharge :100-200 lpm, Outlet size: 40mm, suitable for 100 mm bore Size. DJB SOR (E&M) 2021-2022 Item Code 2.10.14 Make: BS/KBL/ DJB Approved

S/o 2.5 sq.mm flat 3 Core PVC insulated & PVC Sheathed submersible cable suitable for 1100 Volts Copper cable confirming IS:694. DJB SOR (E&M) 2021-2022 Code18.10.1. Make : Havells / FortGloster /Grandley/ICL/CCI/ICC/Universal.

S/o G.I. pipe 40 mm dia, Medium class with G.I. flange welded on both sides 3 mtrs long with M.S. ' L' type brackets complete with threading work on each side of the pipe, each G.I. flange should have 4 holes and 2 cuts for cables as per sample. Make of Flange –ISI, Make of pipe: Jindal /Tata/ DJB Approved Make.

S/o G.I Tail Piece of 40mm dia, 1 mtr. Long size medium class completed with one end threaded and one end welded with flange as per sample . Make of Flange –ISI, Make of pipe: Jindal /Tata/ DJB Approved Make.

S/o GI Elbow 40mm dia.Make-Unik/ISI

S/o Rubber insertion / Jointing sheet of size 3 mm thick.Make : Jyoti/National/ DJB Approved Make.

S/o Required off Size full threaded nut-bolts of good quality.

S/o M.S. clamp of 600mm long 12mm thick complete with nut and bolts and washers for holding the 40mm dia pipe including bending and shaping etc. As required.

S/o Bore Cover plate made out of 6 mm thick MS Plate having OD 150mm and ID(40-50) mm in two pieces with bolting arrangement.

Installation of Submersible pumpset with pipe and other accessories, Connection of cable, Installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and lying of GI pipe from bore to panel executing minor Civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipments on No load and full load conditions as per standard and full satisfaction of Engineer-in-charge.This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.

MITTAL TRADING COMPANY