Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.7 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹8.9 L+₹1.2 L (16.3%)Rejected-AOC | 2 | Rejected-AOC L2 |
Tender Value
₹8.6 L
EMD Value
₹21,500
Closing Date
27 Oct 2023, 3:00 pmClosed
SECRETARY KADAVALLUR GRAMAPANCHAYATH
SECRETARY KADAVALLUR GRAMAPANCHAYATH
Construction Of Anganwadi No 34 in ward 12
2023_DP_614933_1
B2-1/2023
Open Tender
Civil Works - Buildings
Item Rate
KADAVALLUR GRAMAPANCHAYATH
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,800
Yes
₹21,500
Yes
12 Dec 2023
20 Oct 2023
28 Oct 2023
20 Oct 2023
27 Oct 2023
20 Oct 2023
20 Oct 2023 - 26 Oct 2023
Amount
Laying and Jointing PVC Pipe. Heading
Stone for masonry work
Portland Cement
Coarse sand (zone III)
Stone Aggregate(single size):20 mm nominal size
Stone Aggregate(single size): 10 mm nominal size
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
Twisted steel/deformed bars
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm diameter
Adjustable span ESO+SI (2.35-3.40)
Adjustable span ESO+SI (2.35-3.40)
Wall form panel 1250x450xmm
Corner angle 45x45x5 mm 2.50 long
Column clamp 450x1070 mm
Prop 2 m (2-3.5m)
Solid blocks of size 30x20x20cm
Solid blocks of size 30x20x15cm
Stone Aggregate(single size): 40 mm nominal size
Anjili wood scantls
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjili wood planks
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
Mild Steel round bar above 12 mm dia
Flats up to 10 mm in thickness
Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
Fine sand (zone IV)
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Acrylic exterior paint
Exterior primer
Plastic emulsion paint
Pink primer (for wood)
Synthetic enamel paint in black or chocolate shade
Vitrified floor tile 50x50 cm
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Polyethylene water storage tank with cover and suitable locking arrangemnet
200 mm Aluminium aldrop
Iron hooks & eyes 100 mm
Anodised Aluminium tower bolt (barrel type)300x10 mm
Chromium plated Brass screws 30 mm
Vitreous china flat back wash basin 550x400 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
Rectangular shape 453x357 mm Mirror with Plastic moulded frame
Hard board 6 mm thick
Rawl plug 50 mm (designation 10 nos)
Chromium plated Brass screws 25 mm
PTMT - Towel Rail (600 mm)
Second class teak wood in scantling
Brass stop-cock 15 mm dia
Brass full way valve with C.I. wheel (screwed end) 25 mm dia
C.P. Brass angle valve 15 mm
Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia
Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
Vitreous china pedestal type wate closet
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
PVC pipe 20 mm outer dia 10 kfg/cm2
PVC pipe 50 mm outer dia.6kgf/cm2
PVC pipe 110 mm outer dia 6kgf/cm2
PVC pipe 110 mm outer dia. 4kgf/cm2
PVC Elbow 63 mm dia
PVC bend 63 mm dia
PVC Tee 63x63x63 mm dia
PVC vent cowl 63 mm dia
PVC end cap 63 mm dia
PVC Reducer 63x50 mm dia
15 mm PTMT bib cock
Mohanan P-Works Contractor
Bidder Name
Mohanan P-Works Contractor
T SURENDRAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .