Construction of Office-cum- residential building for Assistant Engineer HPPWD Sub Division Dehar Tehsil Sundernagar Distt Mandi HP

Amount

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentals, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returning the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Excavation in drain and channel etc . in earth work in all kinds of classification of soil , viz pick jumper , blasting work , hard blasting work including chiseling / wedging out site of rock including dressing of sides, beds and disposing of excavated earth up to any distance and lift and disposed earth to be levelled and neatly dressed as per direction of Engineer- in – charge including carriage of materials with in all leads,lifts, and other incidentals .

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stone filling behind retaining walls including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:5:10. (One cement: five sand : ten graded stone aggregate 40 mm(fourty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth . including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:6:12. (One cement: six sand : twelve graded stone aggregate 40 mm(fourty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth . including all leads and lifts and carriage of materials and other incidentals.with in all leads, lifts and other incidentals.

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought tocourses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six Sand : twelve Graded stone aggregate 20mm ( twenty millimetre ) nominal size in cement mortar 1:6 (one cement: six sand) in breast walls and retaining walls including all leads and lifts and carriage of materials and other incidentals.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Supplying and filling crushed stone aggregate in sock pit of following sizes including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

12mm (twelve millimetre ) nominal size

25mm ( twenty five millimetre ) nominal size

90 mm ( ninety millimetre ) nominal size

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair fISIsh including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work :

Foundation footing and basis of columns etc. and mass concrete including plinth beams and columns upto plinth level including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Columns, Pillar posts and struts, square, rectangular or polygonal in plan including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers girders bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillastersb buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair case with slopping or stepped soffits , excluding landing but including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying reinforced cement concrete design mix M-25 ( twenty five ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Foundation, footings, bases of columns and the like and mass concrete including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Column ,Pillars. Post and struts etc . up to all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and fISInhing of nosing up to all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm ( twenty millimetre ) nominal size) reinforced concrete chajjas not exceeding 10cm. ( ten centimetre ) thickness upto floor all level including finishing the exposed surfaces with cement mortar 1:3 ( one cement : three Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement. including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm ( twenty millimetre ) nominal size and curing complete excluding cost of form work in Foundation and plinth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete work 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm ( twenty millimetre ) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor twolevel including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand)including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class brick masonry in common burnt clay building bricks in foundation in plinth up to all level in cement mortar 1:6 (one cement : six sand) and curing compelete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class brick masonry in common burnt clay building bricks in super structure up to all level in cement mortar 1:6 (one cement : six sand) and curing compelete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying damp proof course 38mm (thirty eight millimetre ) thick with cement concrete 1:2:4 (one cement:two sand:four stone aggregate 12.5mm ( twelve point five millimetre ) nominal size and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. ( one point seventy kilograme ) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing angle iron single rebate door frame manufactured from M.S.Angle iron section including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 50X50x5 ( ( fifty x fifty x fivemillimetre ) and MS flat 200x40x3mm ( two hundred x forty x three millimetre ) welded all corners and joints and embeded in cement concrete block 1:3:6 ( one cement : three sand : six crushed stone agreegate ) size 100x100x100 mm( one hundred x one hundred x one hundred millimetre ) size including hinges and applying a coat of red lead paint and fixing in position complete as per architecture drawing iincluding carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing angle iron double rebate door frame manufactured from M.S.Angle iron section including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel double angle 40X40x5mm( forty x forty x five millimetre ) welded together with 2 No. M.S. flat 12x5mm( twelve x five millimetre ) and one No. flat 50x5mm ( fifty x five millimetre ) to make one frame with steel hinges 2.5mm ( two point five millimetre ) thick with provision of locking arrangement and shock observers and embeded in cement concrete block 1:3:6 ( one cement : three sand : six crushed stone agreegate ) size 100x100x100 mm ( one hundred x one hundred x one hundred millimetre ) size including hinges and applying a coat of red lead paint and fixing in position complete as per architecture drawing including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing steel window made of frame with MS channel 75x40 mm( seventy five x forty millimetre ) and MS flat 75x5mm to make one frame, providing double rebate with making square steel section with mild steel flat of 20x4mm ( twenty x four millimetre ) and 12x4mm ( twelve x four millimetre ) shutter of Z section including glass panes of 4mm(four millimetre) thick in glazed panels and wire gauge of designation 85 G with wire of 0.56mm ( zero point fifty six millimetre ) in wire gauge pannel and fixed glazing fixed with angle and T section 25x25x3mm (twenty five x twenty five x three millimetre ) and MS flat of 12x4mm ( twelve x four millimetre ) in sash bars duly welded of all corners and joint properly holdfast of MS flat 200x50x5mm (two hundred x fifty x five millimetre ) duly welded of corner and joints of all steel sections embeded in CC blocks 1:3:6(one cement:three sand : six graded stone aggregate 20mm( twenty millimetre ) ) nominal size) 100 x100x100mm ( one hundred x one hundred x one hundred millimetre ) size including fittings such as handles tower bolts hooks and eyes and applying a coat of red lead paint and fixing in position complete as per architecture drawing including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing in position collapsible steel shutters with vertical channels 20 X10 X2 mm ( twenty x ten x two millimetre ) and braced with flat iron diagonals 20 mm X5 mm ( twenty x five millimetre ) size with top and bottom rails of T.iron 40 X40 X6 mm ( forty x forty x six millimetre ) with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint.including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. Grills of required pattern in wooden/Steel frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grills including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm (fourty millimetre) thick 2nd class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 12 mm ( twelve millimetre ) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (fourty millimetre) thick frame including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 2nd class deodar wood.40mm (fourty millimetre) thick including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm( nineteen millimetre ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 1.00mm (one millimetre ) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing square edges cover fillets (beading) 19mmx6mm ( nineteen x six millimetre ) section including mitring at junctions with wood screws and nails complete.1st class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm( twenty five millimetre ) dia and brackets of first class deodar wood (actual length) of rails of be measured including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required shade with bolt and nut and screws etc. 250 mmx16mm ( two hundred fifty x sixteen millimetre ) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing anodized aluminum tower bolts (Barrel type) anodized transparent or dyed to required shades and color with screw etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

200x10mm (Two hundred x ten millimeter)

75 mm (Seventy five millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required shades and color with screws etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

125 mm (One hundred twenty five millimeter)

75 mm (Seventy five millimeter)

Providing and fixing 50mm ( fifty millimetre ) bright finished brass cup board or ward robe knob including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 150mm ( one hundred fifty millimetre ) oxidized M.S. double acting spring hinges with necessary screws. . including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 115mm ( one hundred fifteen millimetre ) M.S. safety hasps and stapples with necessary screws etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 150mm ( one hundred fifty millimetre ) bright finished or/and black enamelled iron (Helical door spring ) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 65x35mm( sixty five x thirty five millimetre ) special quality chromium plated brass cup board lock with six leavers including necessary screws etc. complete (Indian make) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying Duro stone vetrified tiles 600x600mmx10mm( six hundred x six hundred x ten millimetre ) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying Duro stone vetrified tiles 300x300mmx8mm ( three hundred x three hundred x eight millimetre ) in grey/coloured of required shade in skirting risers of steps and dados on 12mm( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Kota stone slab flooring 20 mm( twenty millimetre ) (average) thick base of cement mortor 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. 25 mm ( twenty five millimetre ) thick including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Kota stone slab 25 mm ( twenty five millimetre ) thick in risers of steps,skirting dado and pillars laid on 12 mm ( twelve millimetre ) (average) thick cement mortar 1:3 ( one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Cement concrete flooring 1:2:4 (one cement : two sand: four graded stone aggregate 20 mm ( twenty millimetre ) nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm (forty millimetre ) thick including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing Glass strips in joints in floors 40 mm( forty millimetre ) wide and 4 mm( four millimetre) thick including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. ( twenty millimetre ) thick base in cement mortar 1:3(one cement: three sand) including jointing with cement mortar 1:2(one white cement: two marble dust) with an admixure of pigment to match the shade of the marble. 20 mm ( twenty millimetre ) thick White makrana marbleincluding carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister (RNP) organic coating of 20 ( twenty ) microns over 5(five ) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted GI limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-Charge complete as per specification including carriage of material within all leads, lifts and other incidental charges.

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20( twenty ) microns over 5 (five) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction of Engineer- in- charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing valley 60 cm ( sixty centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with screwa prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing 0.63mm (zero point sixty three millimetre) thick 15cm (fifteen centimetre) wide 45cm (forty five centimetre) over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty x three millimetre) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Steel work welded in built up sections, trusses and framed work including cutting, hosinting fxing in position and applying a priming coat of red lead paint.

In trusses and trussed purlins in buildings including cutting hoisting fixing in position and applying a priming coat of red lead paint complete as per design including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

In gratings framed guard bars, ladders, railling, brackets and similar works complete as per design including carriage of materials with in all leads , lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100mm( one hundred millimetre ) dia pipescomplete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

i) PVC Plain bend 100/150mm ( one hundred / one hundrd fifty millimetre ) dia

ii) PVC shoe 100/150mm ( one hundred / one hundrd fifty millimetre ) dia

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 150mm ( one hundred fifty millimetre ) dia pipes complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S .holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm( ten x ten x ten centimetre ) of 1:2:4:mix (one cement : two sand : four stone graded stone aggregate 20 mm( twenty millimetre ) nominal size) and cost of cutting holes and making good the wall etc 150 mm ( one hundred fifty millimetre ) diametre complete as per specification as per direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per specification as per direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals..

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement: six sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 ( one cement: four sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm ( fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement:six sand) including carriage of materials within all leads , lifts of material and other incidentals .

20mm( twenty millimetre ) thick plain cement mortar bands in cement mortar 1:4(one cement: four sand)above 300mm( three hundred millimetre ) in width. Raised Band. complete including carriage of materials within all leads , lifts of material and other incidentals .

White washing with lime on undecorated ceiling and/or slopping roofs surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Distempering(two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat with alkali resistant primer of approved brand and manufacture after thoroghly brushing the surface free from mortor dropping and other foriegn matter and also including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats (excluding priming coat) on new steel and other metal surfaces, with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing wood primer pink complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing plinth protection 50mm ( fifty millimetre ) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregates 20 mm( twenty millimetre nominal size) including fISIshing the top surface of concrete smooth including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidental

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm ( fifteen x twenty two centimetre ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm ( ten centimetre ) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm ( forty millimetre nominal size) and 7.5 cm ( seven point five centimetre ) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm( twenty millimetre ) nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of materials with in all leads, lifts and other incidental charges complete in all respect .

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of any metres and lift upto any metres disposed earth to be levelled and neatly dressed pick work. pick Work including carriage of materials with in all leads, lifts and other incidental charges complete in all respect .

Providing and laying cement concrete 1:3:6. (One cement: three sand : six graded stone aggregate 40 mm( forty millimetre ) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials with in all leads, lifts and other incidental.

Supplying and fixing 455 x 610 mm ( four hundred x six hundred ten millimetre ) cast iron cover without frame for manholes complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

WS &SI Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

15 mm (fifteen millimetre) nominal bore.

20 mm (twenty millimetre) nominal bore.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) 25mm( twenty five millimetre ) nominal bore complete. including carriage of material within all leads , lifts of material and other incidentals

Making connection of galvanined mild steel dintribution branch with galvanined mild steel main 20mm to 40mm (twenty millimetre to forty millimetre ) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1000 (one thousand liters) net capacity PVC water storage tank of ISI 12701 marked, G.I. Inlet and outlet connection , 15 mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof PVC cover with locking arangement including hoisting up to all heights above ground level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including jointing with approved adhesive etc. including carriage of materials with in all leads, lifts and other incidental charges in all respect as per direction and Satisfaction of Engineer- in- charge .

75mm( Seventy five millimeter )nominal diameter .

110mm( one hundred ten millimeter )nominal diameter .

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm( three millimetre ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.75 mm( Seventy five millimeter ) dia. complete. including carriage of material within all leads , lifts of material and other incidentals

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 75mm(Seventy five millimeters) dia.complete. including carriage of material within all leads , lifts of material and other incidentals

75mm( Seventy five millimeter )nominal diameter .

110mm( one hundred ten millimeter )nominal diameter .

Providing and fixing PVC “Y" junction with oval access door, insertion rubber washer 3 mm ( three millimtre ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.complete. including carriage of material within all leads , lifts of material and other incidentals

75mm( Seventy five millimeter )nominal diameter .

110mm( one hundred ten millimeter )nominal diameter .

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete complete. including carriage of material within all leads , lifts of material and other incidentals

75mm( Seventy five millimeter )nominal diameter .

110mm( onr hundred ten millimeter )nominal diameter .

Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm. ( one hundred ten x seventy five millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.complete. including carriage of material within all leads , lifts of material and other incidentals

75mm( Seventy five millimeter )nominal diameter .

110mm( one hundred ten millimeter )nominal diameter .

Providing and fixing PVC cowl : complete. including carriage of material within all leads , lifts of material and other incidentals .

75mm( Seventy five millimeter )nominal diameter .

110mm( one hundred ten millimeter )nominal diameter .

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm ( five hundred eight millimetre ) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) ORISSA PATTERN complete. including carriage of material within all leads , lifts of material and other incidentals

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately):Angle Indian Universal closet including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260mm x 350( four hundred thirty x two hundred sixty millimetre ) and 340x430x265mm ( three hundred forty x four hundred thirty x two hundred sixty five millimetre ) sizes, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required Single squatting plate with 5 litres C.I automatic flushing cistern. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately 10 litres net capacity. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 110mm (one hundred ten millimeters) nominal diameter PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings: Flat back 550mmx400mm( fifty five x four hundred millimetre ) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 610 x460 mm ( six hundred ten x four hundred sixty millimetre ) with bowl depth 200 mm. ( two hundred millimetre ) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing rubber plug for sink / wash basin 32mm (thirty two millimetre)dia including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing C.P. Brass chain 50cm( fifty centimetre ) long and rubber plug of following sizes for sink or wash basin 32mm (thirty two millimetre)dia including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing M.I. union for wash basin or sink 32mm (thirty two millimetre) dia size. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 32mm (thirty two millimetre) dia lead waste pipe for wash basin or sink including brass check nuts. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 100mm ( one hundred millimetre ) dia CP heavy duty makes ISI marked (No 8931 and 8934) grating for gully floor Nahni trap. including carriage of material within all leads , lifts of material and other incidentals

Providing and fixing 600x450mm ( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 600mm x 20mm ( six hundred x twenty millimetre ) C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws .including carriage of material within all leads , lifts of material and other incidentals .

Poviding and fixing CP brass toilet paper holders.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws Glass container including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing brass bib tap (Superior or heavy type) with capston head 15mm ( fifteen millimetre ) dia.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing brass bib tap (Superior or heavy type) :15mm ( fifteen millimetre ) dia long nose including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing C.P Brass pillar tap with Capstan head 15mm ( fifteen millimetre ) dia including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing PVC connection pipe with brass union300/450mm three hundred , four hundred fifty millimetre ) length nominal bore.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing Brass full way valve with wheel.including carriage of material within all leads , lifts of material and other incidentals .

15mm ( fifteen millimetre ) dia

20mm ( twenty millimetre ) dia

Providing and fixing Brass angle valve 15mm ( fifteen millimetre ) dia without nuts and pipes ncluding carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 600 x 120 mm ( six hundred x one hundred twenty millimetre ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws .including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing bath shower including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing mixer for kitchen sink with top / bottom swinging spout. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing vitreous china pedastal for wash basin complete recessed at the back for the reception of pipes and fittings. including carriage of material within all leads , lifts of material and other incidentals .

Extra for a pair of holes pillar taps instead of single hole. including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 15 mm ( fifteen millimetre ) nominal bore PTMT concealed stop cock with flange of approved quality and colour including carriage of material within all leads , lifts of material and other incidentals .

Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete. 150 mm ( one hundred fifty millimetre ) )dia. including carriage of material within all leads , lifts of material and other incidentals .

Providing and laying cement concrete 1:4:8 (one Cement : four Sand : eight graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete for 150 mm ( one hundred fifty millimetre ) )dia pipe.including carriage of material within all leads , lifts of material and other incidentals .

Constructing manhole with RCC top slab 1:2:4 mix ( one cement : two approved sand :four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm ( forty millimetre ) nominal size) and inside plastering 15mm ( fifteen millimetre ) thick with cement mortar 1:3 (one cement three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement two sand :four graded stone aggregate 20mm ( twenty millimetre ) nominal size ) finished smooth complete including curing and testing . Inside size 800mm x800mm x and 500mm (eight hundred x eight hundred x five hundred millimetre ) deep including C.I cover with frame (light duty single seal pattern -1) 455 x610mm ( four hundred fifty five x six hundred ten millimtre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram ) (weight of cover 23 kg (twenty three kilogram ) of frame 15kg (fifteen kilogram)

With 200mm (two hundred millimetres ) thick walls of brick masonary using common brunt clay building bricks approved quality in cement mortar 1:3 (one cement : three sand .) complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Inside size 800 mm x 800 mm ( eight hundred x eight hundred millimetre ) and 1000 mm ( one thousand millimetre ) deep including C.I cover with frame. (Light duty single seal pattern - 455mm x 610mm ( four hundred fifty five x six hundred ten millimetre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram) (Weight of cover 23 kg( twenty three koilogram) and weight of frame 15 kg. ( fifteen kilogram) ) (a) With 200mm( two hundred millimetre ) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand)including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 ( one cement : five sand ) and water tight C. I. cover with frame of 300mmx300mm( three hundred x three hundred millimetre ) size (inside) the weight of cover to be not less than 4.53kg( four point fifty three kilogram) and frame to be not less than 2.72kg. ( two point seventy two kilogram) I Square Mouth Traps : 150mmx100mm( one hundred fifty x one hundred millimetre ) size P or R type including carriage of material within all leads , lifts of material and other incidentals .

SHANKAR SINGH