REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION SUB MAIN WIRING DBs REPLACEMENT OF OLD UNSERVICEABLE LIGHT FITTING FIXTURE SHIFTING OF ELECT METER TO OUTSIDE AND CONNECTED ACCESSORIES IN MT COLONY AND CONNECTED WORKS IN VB MESS ARMORY AND MAGAZINE

Amount

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in cement mortar 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed. Note:- Roof/ceiling height of bldg up to 15 mtr. where U/S point wiring/fitting fixture to be taking out.

M & L for Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FR-LSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including suitable size PVC conduit concealed and 1.5 Sqmm PVC suitable size insulated unsheathed multistranded copper conductor cable FR-LSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets etc complete for the following:- Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. (iii) Modular cover plate with frame and sunken steel boxes zinc oxide plated as per site requirements shall be included in quoted rates.

One light point controlled by one, one way Modular switch 6 Amps

One fan/exhuast fan point controlled by one, one way Modular switch 6 Amps

One 5 pin 5 Amps switch socket outlet point controlled by one modular switch on the same board.

One 5 pin 5 Amps switch socket outlet point controlled by one Modular switch on independent boad.

One bell point controlled by one, one way modular switch 5 / 6 Amp.

Description all as per item No 2.00 above but point wiring with 2.5 sqmm multistrand copper conductor cable FR-LHS for one five pin modular socket outlet 15 Amps controlled by one modular switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable FR-LHS as continous earth wire.

M & L for Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FR-LSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing conduit concealed/ surface/casing & caping and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FR-LSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets etc complete for the following:- Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. (iii) Modular cover plate with frame and sunken steel boxes zinc oxide plated as per site requirements shall be included in quoted rates.

One light point controlled by one, one way Modular switch 6 Amps

One fan/exhuast fan point controlled by one, one way Modular switch 6 Amps

One 5 pin 5 Amps switch socket outlet point controlled by one modular switch on the same board.

One 5 pin 5 Amps switch socket outlet point controlled by one Modular switch on independent boad.

One bell point controlled by one, one way modular switch 5 / 6 Amp.

Description all as per item No 4.0 here- in -before but point wiring with 2.5 sqmm multistrand copper conductor cable FR-LHS for one five pin modular socket outlet 15 Amps controlled by one modular switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable FR-LHS as continous earth wire.

M & L for Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FR-LSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including surface PVC casing & caping of suitable size with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FR-LSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Note:- (i) The quoted rates shall be deemed to be inclusive for fixing the casings to surface with using PVC rawl plugs etc. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch.

One fan/exhaust fan point controlled by one, one way 6 Amp switch.

One 5 pin 5/6 Amps socket outlet point on the same board with other switch .

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, one way switch.

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 6.0 here-in-before but point wiring with 2.5 sqmm multistrand copper conductor cable FR-LHS for five pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable FR-LHS as continous earth wire.

M & L for Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FR-LSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing conduit concealed/ surface/casing & caping and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FR-LSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switchs.

One fan/exhaust fan point controlled by one, one way 6 Amp switch.

One 5 pin 5/6 Amps socket outlet point on the same board with other switch.

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, one way switch.

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 8.0 here-in-before but point wiring with 2.5 sqmm multistrand copper conductor cable FR-LHS for one five pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable FR-LHS as continous earth wire.

S & F Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed

S & F Switch piano, flush type, single pole one way, 15 Amp complete all specified and as directed

S & F Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed

S & F Socket outlet, multipurpose, 2 in 1, 5 pin, 15 Amp complete all specified and as directed

S & F Bell push flush type, 5 Amps complete all specified and as directed.

S & F Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed

S & F Modular switch single pole one way 6 Amp complete all specified and as directed.

S & F Modular switch single pole one way 16 Amp complete all specified and as directed

S & F Modular socket outlet 2/3 pin combined 6 Amp 240 volts complete all specified and as directed

S & F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all specified and as directed.

S & F Modular bell push flush type 5 Amps complete all specified and as directed.

S & F Fan regulator modular step type 120W 240 volts 2 module type complete all as specified and directed.

S & F Switch piano, flush type, single pole one way 5 Amp fixed in repairs complete all as specified and directed.

S & F Switch piano, flush type, single pole one way 15 Amp fixed in repairs complete all as specified and directed.

S & F Socket out let, multipurpose, 2 in 1 5 pin, 5 Amp fixed in repairs complete all as specified and directed.

S & F Socket out let, multipurpose, 2 in 1 5 pin, 15 Amp fixed in repair complete all as specified and directed

S & F Batten holder PVC/polycarbonate type with back plate suitable for batten fitting fixed in repairs complete all as specified and directed.

S & F Modular switch single pole one way 6 amp fixed in repairs complete all as specified and directed.

S & F Modular switch single pole one way 16 amp fixed in repairs complete all as specified and directed.

S & F Modular socket outlet 2/3 pin combined 6 amp 240 volts fixed in repairs complete all as specified and directed.

S & F Modular socket outlet 2/3 pin combined 16 amp 240 volts fixed in repair complete all as specified and directed.

S & F Modular bell push flush type 5 amp fixed in repair complete all as specified and directed

S & F Fan regulator modular step type 100W 240 volts 2 module type fixed in repair complete all as specified and directed.

Supply and fix top plug 15 amp, 240 volts, ISI marked.

Supply and fix top plug 5 amp, 240 volts, ISI marked.

S & F PVC insulated copper cable size 3 core 70/.0076, AC 1100/660 volt including taking down existing unserviceable cable complete as directed.

S & F Capacitor 2.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repairs complete all as directed.

S & F Capacitor 3.15 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as directed.

S & F Capacitor 4 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as directed.

S & F Surface plastic boxes white 1 or 2 module,size 85 X 85 40mm suitable for mouning 5/15 Amps switch and socket including meteal screw,rawl plug etc complete fixed in repair all as spcified and directed.

S & F Surface plastic boxes white 3 module,size 73 X 115 40mm suitable for mouning 5/15 Amps switch and socket including meteal screw,rawl plug etc complete fixed in repair all as spcified and directed.

S & F Surface plastic boxes white 4 module,size 85 X 145 42mm suitable for mouning 5/15 Amps switch and socket including meteal screw,rawl plug etc complete fixed in repair all as spcified and directed.

S & F Surface plastic boxes white 6 module,size 85 X 219 42mm suitable for mouning 5/15 Amps switch and socket including meteal screw,rawl plug etc complete fixed in repair all as spcified and directed.

S&F Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed.

S & F MCB SP 6 to 32Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as specified and directed.

S & F MCB SPN 40 to 63 Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as directed.

S & F MCB TPN 40 to 63 Amps, 415 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as directed.

S & F MCB SPN 63 Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as directed.

S & F MCB TPN 63 Amps, 415 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as directed.

S & F MCB TPN 100 Amps, 415 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repairs all as directed.

S & F Sheet metal enclosure, single pole and neutral with three pin and earth plug and socket with and including one single pole MCB 20 Amps, 240 volts,10 KA complete fixed in repaisr all as directed.

S & F Sheet metal enclosure, triple pole and neutral with three pin and earth plug and socket with and including one four pole MCB 63 Amps, 415 volts,10 KA complete fixed in repair all as directed.

S & F Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting switch, socket fan regulator etc including taking down existing unserviceable bakelite sheet cover complete all as spcified and directed.

M & L for Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 10 Sqm size with multi stranded copper conductor drawing into and including 20mm dia or higher dia as required rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 10 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc.

M & L for Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 6 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia or higher dia as required rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 6 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc.

Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 4 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 4 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc.

M & L for Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 2.5 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia or higher dia as required rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 2.5 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc.

M & L for Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 10 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including one run single core PVC insulated unsheathed 10 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

M & L for Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 6 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including one run single core PVC insulated unsheathed 6 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 4 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including one run single core PVC insulated unsheathed 4 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 2.5 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including one run single core PVC insulated unsheathed 2.5 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

M & L for Sub main wiring with four single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 10 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including two run of two core PVC insulated unsheathed 10 Sqmm FRLS cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Four run of single core PVC cable with two run of earth conductor shall be measured as one unit.

M & L for Sub main wiring with four single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 6 Sqmm size with multi stranded copper conductor drawing into existing conduit as required including two run of two core PVC insulated unsheathed 6 Sqmm FRLS cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed.NOTE: (i) Four run of single core PVC cable with two run of earth conductor shall be measured as one unit.

S & F LED flood light fitting 50 watt energy saving and enviromental friendly long liife exclusive innovative made up of pressure die cast aluminium housing with high power LED as lightnig source, suitable for highlighting archtectural features or area lighting also suitable for rough services/installations and carefully without damaging existing light fittings and connected items complete all as specified and directed.Make: Havells,Cat Part No-JETAQUANTOFLS 50WLED765SYMPC or equivalent in philips cat part No-BVP140 P LED50 CW WB S1 PSU 50W MG P4287, Eveready cat No-LEDFL0015-04.

S & F Surface and wall mounted LED batten fitting 22 watt 230 volts AC, cool white not less than 1135 mm extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed.

S & F Surface and wall mounted LED batten fitting 10 watt 230 volts AC, cool white not less than 525 mm extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed.

Surface and wall mounted LED batten with aluminium housing and integrated electronic driver with and including 40 W LED tube rod complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as specified and directed.

S & F Perfect for interior and exterior applications environmental friendly,ultra modern,energy saving surface mounted decorative oval bulk head edge-lit LED luminare comprising and including 10 watt high brightness LED's and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting all as specified and directed.

S & F Suspended architectural LED luminaire along with suspension kit & integral electronic driver provides soft light and glare free symmetrical illumination (with continuous mounting end cap) with and including 40 W LED tube rod and all accessories and fixing arrangement for fixing the light fitting including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed.

S & F Aesthetically designed, 1'x1' cool white/warm white flat panel suitable for surface mounting which provide soft-light and glare free symmetrical illumination of fixture size 300x300x70 mm with and including 15 W LED complete, integrated electronic driver and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed.

S & F Aesthetically designed, cool white/warm white flat panel suitable for recessed mounting which provide soft-light and glare free symmetrical illumination of fixture size 295x295x70 mm with and including 18 W LED complete, integrated electronic driver and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed.

S & F Aesthetically designed, 2' x 2' cool white flat panel for suitable for surface mounting which provide soft-light and glare free symmetrical illumination of fixture size 600x600x70 mm with and including 42 W LED complete, integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed.

S & F Aesthetically designed, LED 4'x1' cool white flat panel suitable for surface mounting which provide soft-light and glare free symmetrical illumination of fixture size 1200x300x70 mm with and including 42W LED complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items all as directed.

S & F Aesthetically designed, 2' x 2' cool white/warm white flat panel for suitable for armstrong/grid ceiling which provide soft-light and glare free symmetrical illumination of fixture size 595x595x70 mm with and including 42 W LED complete, integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed.

S & F Aesthetically designed, 2' x 2' cool white white flat panel for suitable for armstrong/grid ceiling masterlite BB comes with a provision for battery back up with seamless shift to emergency lighting in case of power failure .LED luminaires made in CRCA sheet metal with wider light window with opal polystyrene diffuser for spotless glare-free uniform lighting fixture size 595x595x70 mm with and including 36 W LED complete, with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed. Make:- Philips/Crompton/Eveready,cat No-LEDPLB03616-04BB

Surface and wall mounted LED track light fitting 35 W, 230 volts AC, cool white with high power LED cylindro offers various luminous intensity levels from 1500-3500 lumens which is the perfect alternate to concentional HID lamps suitable for 3 circuit 4 wire universal tracks and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as directed.

Supply and fix in replacement of track light of length 1meter suitable for fixing track/focus light fitting 35 W complete all as spcified and directed.

S & F round/square surface mounted LED downlighter 18 watt with powder coated aluminium housing with integrated electronic driver and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling rose including taking down existing fitting complete all as directed.

S & F round/square surface mounted LED downlighter 15 watt with powder coated aluminium housing with integrated electronic driver and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling rose including taking down existing fitting complete all as directed.

S & F Sky Cove LED strip especially designed for commercial use of length 50 meter suitable for surface and wall mounted LED 6 W complete all as spcified and directed.

Material and labour for surface and wall mounted Up-Down LED batten fitting, minimum wattage 20 W, side with minimum system lumens 2000 lumens and CCT6500K lower side and CCT 3000 K lower side, not less than 1222 mm in size and made up of polycarbonare channel with ABS end caps and integrated LED driver, voltage range 160-360 volts with 2 KV surge protection for better durability and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed.

S & F 25 watt LED cool white, energy saving IP65, environment friendly, long life, LED street light made up of pressure die-cast aluminium housing with high power LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment, integrated electronic driver suitable for pole dia 43 mm (max) including suitable size of bracket bent in shape including 2 Nos clamps, nut, bolts etc and fixing on walls complete including taking down existing light fitting etc complete all as directed.

S & F recess mounted round shaped LED downlighter 15 W 230 volts AC, cool white with durable housing powder coated pressure die cast aluminium luminium fitting with white finish in round profile with optimized heat sink for efficient heat dissipation and separtae replaceable electronic driver ceiling cutout size 155 mm dia including 15 W LED lamp complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting all as directed.

Supply and fix in repair LED Inverter bulb 9 watt retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours,high efficiency high lumens output complete all as specified and directed.

Supply and fix Energy saving, environment friendly, long life LED flood light fitting 120 watt exclusive innovative die-cast aluminium IP66 suitable for highlighting architectural facade and general purpose lighting omplete with all accessories including taking down existing fitting complete all as directed.

Supply and fix energy saving, environment friendly and robust highway/mediumbay, long life LED light fitting 150 W IP65 luminaire with high efficacy complete with all accessories including taking down existing fitting complete all as directed.

S & F LED ball lamp 15 W suitable for Angle/ pendant holder fittings complete all as specified and directed. Make:-Bajaj/Surya/Havells

S & F PVC insulated and sheathed cable 03 core 04 sqmm stranded copper conductor fixed in repair complete all as specified and directed.

S & F PVC insulated and sheathed cable 04 core 06 sqmm stranded copper conductor fixed in repair complete all as specified and directed.

PVC insulated and sheathed cable 03 core 2.5 sqmm stranded copper conductor fixed in repair complete all as specified and directed.

Supply and fix in replacement of plastic body exhaust fan 250 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc complete all as specified and directed.

Supply and fix in replacement of metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc complete all as specified and directed.

Supply and fix in replacement of ceiling fan 1200 mm sweep, 230 volts 50 Hz, energy saving 26 watt model single phase, copper wound motor, pearl white in colour including electronic type fan regulator complete with blade, down rod , canopy and connected with ceiling rose etc complete all as specified and directed.

M & L for Circuit/submain wiring with single core FR-LSH PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit/casing & caping in surface/concealed as required, including taking down unserviceable existing wiring etc complete of following sizes as directed.

Material and labour for 1100 volts grade heavy duty one twin core flat or circular cable PVC insulated stranded aluminium conductor of size 16 sq mm, served with inner sheathing of PVC tape and overall PVC sheathed including taking down unserviceable complete all as directed.

Material and labour for 1100 volts grade heavy duty one twin core flat or circular cable PVC insulated stranded aluminium conductor of size 10 sq mm, served with inner sheathing of PVC tape and overall PVC sheathed including taking down unserviceable complete all as directed.

S & F MCCB 100 Amps,4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as directed.

S & F MCCB 125 Amps 4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as directed.

Material and labour for MCB DB, sheet metal enclosures single door SPN 2 way without bus bar 240 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

Material and labour for MCB DB, sheet metal enclosures double door SPN 4 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

S & F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

S & F MCB DB, sheet metal enclosures double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

Material and labour for MCB DB, sheet metal enclosures double door TPN 4 way with 200 Amps rated bus bar 415 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

Material and labour for Distribution boards epoxy powder coated TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings complete including disconnecting and taking down existing DB complete all as directed.

S & F in repairs and maintenance of belt drive centrifugal blower exhaust system of cap 21500 CMH complete including dismantling and cleaning, greasing and re fixing the same and replacing the following unserviceable parts and making the unit serviceable complete in all respect and testing complete all as specified and directed.(a) Blower housing exhaust unit as per existing size -o1 Nos,(b) Blower Fan of existing size and make suitable for blower housing - 01 No,(c) Blower shafts- as required,(d) Bearings as per existing size- 02 Nos Make SKF/NBC,(e) Bearing Housing as per existing size- 02 Nos,(f) Gaskets- as required,(g) via ration pads- as required,(h) MS sheet 0.3 mm thick as per existing system- as required,(j) Angle iron Channel off sizes- as x required,(k) Preparation for painting of ducting system external surfaces with super enameled synthetic paint over a coat of red oxide primer - complete external complete all as directed.,(l) Welding works of existing angle iron and MS sheets- as required,(m) PCC foundation works 1: 3:6 - for complete unit as per existing size etc complete all as directed.,

Supply and fix in replacement direct drive tube axial fan 600 mm sweep 2 HP 440Volts Three phase 1440 RPM with complete housing of complete all as directed.

Supply and fixing PGI sheet ducting of including fixing arrangement made out of PGI sheet of 26 SWG to connect with the existing ducting including taking out damaged ducting complete all as directed.

Taking out for Repair and maint of induction motor of capacity 10 /7.5HP including rewinding of motor with super enameled copper winding wire of existing gauge, varnishing, over hauling servicing, greasing and painting and re fixing the same complete all as directed.

Supply and fix in repairs fan belts for exhaust belt drives, Belt No B 68 & 69 complete all as directed. Make- Fanner

Supply and fix in repair MS pully for motor as per existing size and drive complete all as directed.

Supply, laying, jointing and testing PVC insulated and shethed multi core control cable unarmed 1100 volt grade with stranded copper conductor of size 4 sq mm 4 core on wall/floor/celing or making holes, cutting chesis as required and making good to disturbed surface etc including surface mounted non metallic rigid PVC conduit ISI marked not less than 32 mm dia complete all as directed.

S & F Mild steel sheet 3.0mm thick for repair to fresh air housing including welding works etc as required at site complete all as directed.

S & F Cross arms, bracings, supports clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size including one primer coat one under coat and one finishing coat of paint including disconnecting and taking up or down existing unserviceable cross arms, clamp etc complete all as directed.

S & F Mild steel sheet 2.0mm thick for repair to fresh air housing including welding works etc as required at site complete all as directed.

Supply and install stainless sheet for chimney hood size 1800 X 1800 mm connect wth all accessories the existing ducked including taking out damaged hood complete all as directed.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

M/S S P BUILDERS

Bhanu Prakash

M/s Anamika Enterprises

Avtarsinghchaddhaandcompany

Meher enterprises

M R Taders

PRAGATI ENTERPRISES

venus engineers