Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC H NO 82C BLOCK CC SHALIMAR BAGH DELHI 110088 | DELHI | NORTH WEST DELHI | DELHI | 110088 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹34.1 L+₹1.7 L (5.10%)Rejected-Finance EKTA ENCLAVE PHASE 1 SEWLA KALAN CHANDERBANI ROAD DEHRADUN U K PIN 248171 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248171 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹34.4 L+₹2.0 L (6.07%)Rejected-Finance BIJAULI MANGLORE ROORKEE HARIDWAR 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹34.8 L+₹2.3 L (7.11%)Rejected-Finance 21 NEAR LAL KOTHI CHANDER NAGAR SAHARANPUR UP 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹36.5 L+₹4.0 L (12.4%)Rejected-Finance A 29 SAMRAT PALACE GARH ROAD MEERUT UP 250001 | MEERUT | UTTAR PRADESH | 250001 | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town
PERIODICAL SERVICES TO MD ACCN/ OTM ACCN IN ZONE- A AND B UNDER AGE B/R-II AT GE CLEMENT TOWN, DEHRADUN
2023_MES_617188_2
GE /CLT/ of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
₹90,000
Yes
9 Jan 2024
10 Nov 2023
4 Dec 2023
10 Nov 2023
1 Dec 2023
17 Nov 2023
Amount
M&L for preparation of old surface on ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of wall including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of wall , kerb stone including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of cement base paint on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorated distempered surfaces on internal walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and making the surface smooth by rubbing with sand paper and applying one coat of acrylic distemper (oil emulsion) using rollers of approved tint and make all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over a layer of wall care putty to make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE.
M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE. (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specially provided and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster, in any thickness from brick or stone walls,/facia of roof Chajjas,roof projection,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. , beams, columns ,lintel,chajja, fin , facia etc. of any thickness including tapering all edges,cleaning of exposed concrete surface applying a layer of thick cement slurry and M&L 20 mm thick plaster in cement plaster in two layers ( first dubbing layer 15 mm thick in cement mortar 1:4 and after drying a 5 mm thick cement plaster in CM 1:3 finishing the edges, corner etc even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for 15mm thick cement plaster in CM 1:4 on fair face of brick walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
Supply only water proofing compound liquid ISI marked as approved by GE Complete all as specified and directed by Engineer in Charge . .
M&L for Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement Complete all as specified and directed by Engineer in Charge .
M&Lfor rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement). Complete all as specified and directed
M&L for preparation of newly plastered surface of external wall and applying two coat of cement base paint complete all as specified and as directed by Engr-in-Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces. complete all as specified and directed by Engr In Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for white washing three coats on wall incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for preapration of old plastered or unplastered surafces of walls, concrete tiles, kerb stone and the like and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old painted steel surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed by Engr-in-Charge
S&F ceramic tiles 300X300 in vertical surfaces on sides / front of building to mark bldg numbers fixed with Fevimate adhesive and printed with numbers etc or stick computersied Sticker letters up to 8 letters comma,dash all as directed by Engr -in-charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for RCC (1: 1½ :3) ,12.50 mm graded aggregate in position for strengthening of beams,columns,facia,RCC chhajja,stair and including other structural elements of any thickness and including surface preparation & suitable type of formwork etc complete all as per directed by Engr-in-Charge.(Any storey/height of building/structure/icluding scaffolding). Note:- (a) The work is required to be carried out in buildings up to trippled storyed. (b) :- The contractor will all make arrangement for scaffolding etc. (c) :- Adequate arrangement for safty and security of labours shall also be made by the contractor. (d) :- The cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible.
M&L for preparation of old steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of aluminium paint incl scrapping of old surface complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
S & F 110 mm bore PPR (SWR) Soil, waste and vent pipes (Grade 'B' pressure rating) (single socketed in any length with rubber ring joints laid in trenches or in floors/Wall inc all fittings complete all as specified and directed.
Removal of tree/roots etc from chajja facia roof and wall, corner of wall etc complete all as specified and as directed by Engr-in-Charge.
Cutting of grass brush scrubbing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots complete all as specified and as directed by Engr-in-Charge.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
V R Associates
new hindustan construction company
JBN CONSTRUCTION
Jain Engineering Works
KAPOOR ELECTRICALS
A.S. CONSTRUCTION COMPANY
M/s RK ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .