Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC | L1 | Accepted-AOC lowest-single bid |
Tender Value
₹8.0 L
EMD Value
₹20,054
Closing Date
14 Jan 2025, 5:00 pmClosed
Assistant Executive Engineer
PWD Buildings Sub Division Kollam
LAC-ADS-2023-2024 Construction of entrance gate, electrical and other allied works in new building of govt HSS west kollam-Work-General Civil Work
2024_PWD_712018_3
ET-46/AEE/KLM/2024-2025
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,770
Yes
₹20,054
Yes
19 Mar 2025
7 Jan 2025
17 Jan 2025
7 Jan 2025
14 Jan 2025
7 Jan 2025
Amount
Entrance gate
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD164112/2024-2025:Supply & Fixing stainless steel embossed letter Malayalam or English font size 10cm height to the name with bolts and nuts, drilling and fixing to the panel with synthetic resin (paid separately) to correct line and level as per direction of Dept. officer's at site
OD164113/2024-2025:Supply & Fixing stainless steel embossed letter Malayalam or English font size 15cm height to the name with bolts and nuts, drilling and fixing to the panel with synthetic resin (paid separately) to correct line and level as per direction of Dept. officer's at site
OD164114/2024-2025:Supply & Fixing stainless steel embossed letter Malayalam or English font size 18cm height to the name with bolts and nuts, drilling and fixing to the panel with synthetic resin (paid separately) to correct line and level as per direction of Dept. officer's at site
OD164115/2024-2025:Providing and fixing 4mm thick ACP sheet with all fixtures and fittings etc to the already fixed framework with complete finishing.
OD164116/2024-2025:Supply & Fixing stainless steel embossed letter Malayalam or English font size 60cm height (dot)(.),comma(,)etc 15cm height to the name with bolts and nuts,drilling and fixing to the panel with synthetic resin (paid separately) to correct line and level as per direction of Dept.officer's at site
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD177535/2024-2025:Providing and placing polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Bidder Name
KABEERKUTTY CONTRACTOR
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1148865.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .