MISC REPAIR AND REPAINTING TO STEEL FURNITURE UNDER GE MISAMARI

Amount

M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and SMALL made to shape and size as shown on Drawing No. FD-243 & FD-1032 , including taking out unserviceable Shelf, complete all as specified and as directed.

All as per Item no. 1 here in before but for DOOR of ALMIRAH STEEL MED and SMALL,complete all as specified and as directed.

All as per Item no. 1 here in before but fo LOCKING DEVICE of ALMIRAH STEEL MED and SMALL, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and SMALL fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item no. 1 here in before but fo LEG of ALMIRAH STEEL MED and SMALL, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of ALMIRAH STEEL MED and SMALL and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed.

M&L CP HANDLE 100mm long(as approved) of ALMIRAH STEEL MED and SMALL and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for rapair to ALMIRAH STEEL MED and SMALL by neccesary denting to deshaped portions and greasing to hinges, handles and locking systems., complete all as specified and directed.

M&L for preperation of old surfaces of ALMIRAH MED ans SMALL STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, including taking out unserviceable Shelf, complete all as specified and as directed.

All as per Item no. 10 here in before but for DOOR of ALMIRAH LARGE STEEL ,complete all as specified and as directed.

All as per Item no. 10 here in before but for LOCKING DEVICE of ALMIRAH LARGE STEEL, complete all as specified and as directed.

M&L for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item no.10 here in before but for LEG of ALMIRAH LARGE STEEL, complete all as specified and as directed.

M&L for LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Lock, complete all as specified and as directed.

M&L for Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for Mild Steel Hanging rod (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Hanging rod, complete all as specified and as directed.

M&L for rapair to ALMIRAH STEEL LARGE by neccesary denting to deshaped portions and greasing to hinges, handles and locking systems., complete all as specified and directed.

M&L for preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) (Make:Ajay/Maharashtra/aryan or equivalent)to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.

M&L for spot welding the Legs/other joints thar have become loose of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

All as per Item no. 24 here in before but fot for BACK FRAME of CHAIR CBA STEEL WITH ARMS, complete all as specified and as directed..

Supply and Fix PVC CAP at the top of Back Steel Pipe of CHAIR CB STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

M&L for Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CB STEEL WITH ARMS size 35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

Supply and Fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CB STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CB STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for ARMS REST made out of Second Class Hardwood of CHAIR CB STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

M&L for SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

All as per Item No. 31 here in before for BACK FRAME of CHAIR CBA STEEL W/O ARMS, complete all as specified and as directed.

Supply and Fix PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

M&L for Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, applying a coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

Supply and Fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for removing of unserviceable long rail of charpoy GI pipe with nylon newer and fixing new long rail of GI tubing of 32mm bore, medium grade (ISI marked) duly both ends threaded, complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for removing of unserviceable short rail of charpoy GI pipe with nylon newer and making two numbers of short rail from long rails obtained from item no. 37 here in before and threading the both ends of short rails, complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for removing old unserviceable legs of charpoy GI pipe with nylon newer and making two nos. of legs from short rails obtained from item no. 37 here in beforeand threading the both ends of legs and fixing in position, complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for removal of unserviceable 3 way elbow of charpoy GI pipe with nylon newer and S&F new GI elbow of 32mm bore(ISI marked), complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for removal of unserviceable check nuts of charpoy GI pipe with nylon newer and S&F new check nut of 32mm bore (thickness of check nuts shall not be less than 8mm) complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for complete removing/taking down existing nylon newar from GI Pipe charpoys and tightening before weaving with and including approved new white or white colour nylon newar(should not be made of recycled nylon) 50mm wide. Weight 140grams per 10 running meter, closely knitted on both side and end of newar stitched around , weight of newar in each charpoy not less than 1.5kg complete as shown in Drawing No. FD-220 and as specified and directed.

M&L for SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, complete all as specified and as directed.

All as per Item No.43 here in before but for DOOR of LOCKER BED SIDE STEE, complete all as specified and as directed..

M&L for Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

All as per Item No. 43 here in before but for LEG of LOCKER BED SIDE STEEL complete all as specified and as directed.

M&L for Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for aluminum HASP & STAPPLE of size 75mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

M&L for stainless steel rod (as approved) 20mm dia 1.6 mm thick of the exiting of approved quality for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable hanging rod, complete all as specified and as directed.

M&L for Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for TAPESTRY/FABRIC CLOTH after providing a layer of SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER as shown on Drawing No. TP/FD/E6/MAP/01 including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L for CASTOR WHEEL (as approved) of CHAIR COMPUTER as shown in Drawing No. TP/FD/E6/MAP/01including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

M&L for HANDLE of CHAIR COMPUTER as shown in Drawing No. TP/FD/E6/MAP/01 including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

M&L for BOTTOM BASE (as approved) of CHAIR COMPUTER as shown in Drawing No. TP/FD/E6/MAP/01 including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

M&L for GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER as shown in Drawing No. TP/FD/E6/MAP/01 including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

M&L for Top/Side (Size of Top 450mmX450mm) made out of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round, duly polished to match shade of the top of TABLE BED SIDE STEEL MAP and made to shape and size as shown on Drawing No. FD/E6/MAP/15R complete all as specified and as directed.

M&L Back made out of 12mm thick Plywood, BWR Grade of TABLE BED SIDE STEEL MAP as shown on Drawing No. FD/E6/MAP/15R complete all as specified and as directed.

M&L CP HANDLE 75mm long(as approved) of TABLE BED SIDE STEEL MAP and fixing as shown on Drawing No. FD-243Drawing No. FD/E6/MAP/15R including taking out unserviceable Handle, complete all as specified and as directed.

M&L for Mild Steel Square Pipe of size 18mm (as required) for TABLE BED SIDE STEEL MAP and fixing as shown on Drawing No. FD-243Drawing No. FD/E6/MAP/15R including taking out unserviceable pipe including welding and grinding to smooth surface and applying applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for Complete removing/scrapping old worn out Paint from TABLE BED SIDE STEEL (Drawing No. FD/E6/MAP/15R ) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for Top made out of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 3.0 mm thick all round, applying french polish upto the the desired finish on beading shade of the top of Teapoy verandah and made to shape and size as shown on Drawing No. FD-255,383, FD/E6/MAP/17 complete all as specified and as directed.

M&L Short STIFFENER made out of Mild Steel Pipe in the middle at 100 mm high from bottom of legs and fixing to Teapoy Verandah as shown on Drawing No. FD-255, 383, FD/E6/MAP/17, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Stiffener, complete all as specified and as directed.

M&L Long STIFFENER made out of Mild Steel Square Pipe of 20mm dia and wall thickness 1.6mm and fixing to Teapoy Verandah as shown on Drawing No.FD/E6/MAP/17, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Pipe of size 19/20mm and welding of flat iron frame of size 25mmx3mm (as required) for Teapoy Verandah as shown on Drawing No. FD-255, 383, FD/E6/MAP/17, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of teapoy verandah as shown on Drawing No. FD-255, 383,FD/E6/MAP/17 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from Steel Frame of teapoy verandah FD-255,383,FD/E6/MAP/17 by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L TOP of Chair School with Hand Board for removing old U/S top and S&F new top of existing size made up of 18mm thick MDF board, Exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD/E6/MAP/05 complete all as specified and as directed.

M&Lfor new seat fixed on conduit pipe of Chair School with Hand Board and removing unserviceable seat frame as specified on drg no. FD/E6/MAP/05, complete all as specified and as directed.

M&L for Mild Steel HINGE (as approved) suitable for Chair School with Hand Board and fixing to Chair School with Hand Board as shown on Drawing No. FD/E6/MAP/05 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel rounded Pipe of size 25mm (as required) for Chair School with Hand Board as shown on Drawing No. FD/E6/MAP/05, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from Chair School with Hand Board (Drawing No. FD/E6/MAP/05, by Sand Paper/Scrapper and applying two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of Chair School with Hand Board as shown on Drawing No.FD/E6/MAP/05 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Pipe of size 25mm and 3mm dia MS Rod for Rack Shoe Steel as shown on Drawing No. FD/E6/MAP/02 ®., rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from exposed Steel Frame of Rack Shoe Steel (Drawing No. FD/E6/MAP/02 (R))by Sand Paper/ Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

Supply and Fix HARD RUBBER SHOE superior quality (as approved) fixing to Leg of Rack Shoe Steel as shown on Drawing No. FD/E6/MAP/02 (R) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for SHELF made out Mild Steel Sheet of Almirah large steel half hanging and half shelves made to shape and size as shown on Drawing No.FD-114(M)/ FD/E6/MAP/18, complete all as specified and as directed.

All as per Item no. 76 here in before but for DOOR of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

All as per Item no. 76 here in before but fo LOCKING DEVICE of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

All as per Item no. 76 here in before but fo HINGE of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

All as per Item no. 76 here in before but fo LEGS of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

All as per Item no. 76 here in before but fo LOCK of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

All as per Item no. 76 here in before but fo HANDLE of Almirah large steel half hanging and half shelves, complete all as specified and as directed.

M&L for stainless steel rod (as approved) 20mm dia 1.6 mm thick of the exiting of approved quality for Almirah large steel half hanging and half shelves and fixing to Almirah as shown on Drawing No. FD-114(M)/ FD/E6/MAP/18 including taking out unserviceable hanging rod, complete all as specified and as directed.

M&L for rapair to Almirah large steel half hanging and half shelves by neccesary denting to deshaped portions and greasing to hinges, handles and locking systems., complete all as specified and directed.

M&L for preperation of old surfaces of Almirah large steel half hanging and half shelves (Drawing No. FD-114(M)/ FD/E6/MAP/18) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for Welding of Broken top and bottom long sides of size 40mmx4mmx6mm on both long sides for Trestle Store Room Steel as shown on Drawing No. FD-1043, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

M&L old steel surfaces of Trestle Store Room Steel (Drawing No. FD-1043) by Sand Paper/ Scrapper, filling with Filling Materials such as Putty, etc. to obtain a smooth surface, removing all dents and bends and applying one coat of Olive Green Shade Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L for TAPESTRY/FABRIC CLOTH after providing a layer of SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of Chair Writing MAP as shown on Drawing No. FD/E6/MAP/12 including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L for new polyurethane ARMS REST made out of Chair Writing MAP, as shown on Drawing No. FD/E6/MAP/12, including taking out unserviceable Arms Rest, complete all as specified and as directed.

M&L for new polyurethane rubber stopper made out of Chair Writing MAP, as shown on Drawing No. FD/E6/MAP/12, including taking out unserviceable rubber stopper, complete all as specified and as directed.

M&L for painting to all exposed steel surfaces of Chair Writing MAP, with one coat of synthetic enameled paint including preparation of surfaces on Drawing No. FD/E6/MAP/12, complete all as specified and as directed.

M&L for HEAD SIDE BOARD of Bed Hard with plywood top of Prelaminated Particle Board , MDF board exterior grade, fixing as shown on Drawing No. FD/E6/MAP/08 including taking out unserviceable Head Side Board, complete all as specified and as directed.

M&L for FOOT SIDE BOARD of Bed Hard with plywood top of Prelaminated Particle Board , MDF board exterior grade, fixing as shown on Drawing No. FD/E6/MAP/08 including taking out unserviceable Foot Side Board, complete all as specified and as directed.

M&L for fixing of broken middle siffeners by replacement and welding of pipe of existing size of charpoy, complete all as specified and as directed.

M&L for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to Bed Hard with plywood top as shown on Drawing No.FD/E6/MAP/08,including taking out unserviceable Plywood Top, complete all as specified and as directed.(Make:- Greenply/Archidply/Centuryply)

M&L for preperation of old surfaces of Bed Hard with plywood top (Drawing No. FD/E6/MAP/08) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

Baruah Fabrication

M/S K.K.TRADERS

M/S NARAYAN ENTERPRISE

Markson