COMPREHENSIVE MAINT AND PERIODICAL SERVICES INCLUDING CERTAIN MISC BR REPAIR WORKS IN OFFRS MDOTM ACCN AND CENTRAL INST, OFFICERS MESS UNDER ZONE B OF GE A AHMEDABAD

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : MAINT GRANT 2025-2026 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applying one coat of white wash on walls complete all as speciied and directed

All as per item No 1.01 above but one coat of white wash on ceilings.

All as per item No 1.01 above but one coat of oil bound emulsion distemper on walls complete all as specified and directed

All as per iten No 1.01 above but one coat of cement base paint on walls complete all as specified and dircted.

M & L for preparation of old painted wooden : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

All as per item No 1.05 above but applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces, complete all as specified and directed

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one coat of wall care putty and priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surfaces complete all as specified and directed .

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed

All as per item No 1.10 hereinbefore but in CM 1:3 on ceiling, chajja, roof projection etc complete all as speciied and directed

M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

All as per item no 1.13 above but three coat of white wash on ceiling complete all as speciied and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as speciied and directed

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) confirming to grade Fe-410-W(Gde-E-250) quality and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

M&L for MS work as in roof trusses (framed) trussed, purlin, post, rafters including distant pieces, claeats, plates includinjg cutting and welding required confirming to grade Fe-410-W(Gde-E-250) quality complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Dismantling wall and ceiling boards any description, any thickness, including cover fillets complete all as speciied and directed

S&F Solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet and fixing at site on PVC frame complete all as specified and directed by Engr-in-charge

S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

Demolition of cement concrete (unreinforced) any description and in any position (Below or above ground leverl) not otherwise specifically provided for complete all as speciied and directed

M & L for cement concrete 1:4:8, 75 mm thick type D-1,(using 40mm graded stone aggregates), and laid in as floor subbase finished fair and even without using extra cement complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Chequered cement concrete tiles with glossy finish and pigment of size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

M & L for sand filling under floors or in foundations including watering and consolidation.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, set, jointed all as specified and as directed by Engr-in-charge.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including required earthworks and making drainage opening wherever required complete all as specified and directed.

Demolition of brick work/ stone work built in cement mortar or cement lime mortar incl all quoins, arches, pillars , etc. complete all as speciied and directed

M & L for brick work with sub class ‘B’bricks straight or curved on plan exc 6M mean radius built in CM 1:6 and all as specified and directed.

Dismantling of Barbed wire fencing of any description and in any position complete all as speciied and directed

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

Supply only chainlink fencing any size any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of bolt n exc 5cm and dia of shank 5 to 10 cm complete all as speciied and directed

M & L for Mild steel bars 10mm dia and over,confirming to Fe-410-W (Gde.E-250) quality-A, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welding complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as speciied and directed

S & For Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing (but not backing) removing serviceable tiles and rubbish off the premises.

M & L for coloured glazed ceramic tiles of size 450X 350X 7mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in CM 1:4, complete all as specified and directed. complete all as specified and directed.

M & L for Joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed

Ditto all as per item No 1.44 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete all as speciied and directed

M&L in repair for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.40 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

M&L for Cement sheet 4-5mm thick fixed on wall with screws including two or more coat of oil putty for preparation of surfaces even and smooth (match to existing wall) and applying two coat of Oil bound distemper complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as speciied and directed

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as speciied and directed

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three Track using powder coated aluminium sections or approved make, with or without sas bar, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36mm nominal dia of wire and averadge width of oaperature 1.40 mm wire gauze, includingnecessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangments, frame of window should be of handles locking arrangment, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc, complete all as specified and as directed. Note : Rates inclide all glazing/aluminium wire cloth, rubber packing, joining cleat glazing clips, aluminium snap beading, locking arrangments handle etc.

SNEH TRADERS (BID ID -3316494)