MLA-SDF-Kunnamkulam LAC 2020-21 Kunnankulam Muncipality -Beautification of Chatukulam- General Electrical Work

OD37257/2026-2027:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III with Ring type bracket for light fittings suitable for 3 to 10mtr height including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

OD37258/2026-2027:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III with 1 mtr single arm bracket including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD174759/2025-2026:Supply and providing 230V, IP65, integrated LED out door post top light fittings on base pipe and giving connections with 3 core flexible copper wire etc as required.(RubyMini PT25WLED/ Passolite Dory POPT007/ Raytek Toliman PT opal/ Torcular PT clear opal/ K-Lite Light house midi / Crompton Chaplet or equivalent Make)

OD40073/2026-2027:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes as lamp post , plates,channels etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel anchor plates,nuts and bolts complete, etc., with suitable arrangement as per approval of Engineer-in-charge,

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.