Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹5.5 L
EMD Value
₹11,000
Closing Date
14 May 2024, 3:00 pmClosed
Executive Engineer Electric Division Sumbal
Executive Engineer Electric Division Sumbal
Contract for Providing of reliable and un-interrupted Power Supply during Shri Amarnath Ji Yatra 2024 BWO Shifting of HT line from the permisis of Yatra Transit Camp Shadipora .
2024_PDD_248111_1
EDS-06
Open Tender
Electrical Works
Turn-key
90 days
Electric Division Sumbal
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer Electric Division Sumbal
₹11,000
24 Jun 2024
18 Apr 2024
15 May 2024
18 Apr 2024
14 May 2024
18 Apr 2024
18 Apr 2024 - 14 May 2024
Amount
Providing, ,transportation ,installation, testing and Commissioning of ST Poles 11 Mtr long (410-SP-56) including excavation of pit and back filling soil & consolidating each deposit layer of by ramming and watering etc. (as per the latest specification and drawing approved by the department).
Providing, ,transportation ,installation, testing and Commissioning of ST Poles 9 Mtr long (410-SP-33) including excavation of pit and back filling soil & consolidating each deposit layer of by ramming and watering etc. (as per the latest specification and drawing approved by the department).
Painting of pole with one coat of Red-Oxide and Two coats of Aluminium paint (including cost of paint)
Supply and installation of Danger Plates with Clamps
Supply and installation of Anti-Climbing Device with Clamps
Supply and installation of Guard netting of 11 kV lines passing nearby to yatra transit camp (Av. Line length 0.5 Km)
Supply and laying of Cement Bottoming 1:2:4 mix as per REC standards 0 .6 cum/pole including muffing 20 cm above ground level plaster and curing of concrete in size of 600X600X 1700mm for 11Mtr ST poles (410,SP-56 ) (the leftover pit after concreting to be filled with soil and boulders).
Supply and laying of Cement Bottoming 1:2:4 mix as per REC standards 0.5 cum/pole including muffing 20 cm above ground level plaster and curing for 9 Mtr ST poles respectively (the leftover pit after concreting to be filled with soil and boulders).
Providing and fixing of HT pole Earthing Complete by GI Rod 20mm 2.5 mtr long through GI Strip
Providing , Laying and stringing of overhead 0.1 ACSR conductor (Dog) on cross arms through insulators including binding and twisting with soft aluminium wire both side of insulator complete in all respects (as per the latest specification and drawing approved by the department).
Providing , Laying and stringing of overhead 0.05 ACSR conductor (Rabbit) on cross arms through insulators including binding and twisting with soft aluminium wire both side of insulator complete in all respects (as per the latest specification and drawing approved by the department).
Supply and fixing of GI Channel (75X40X40X6 mm) 9' long including Clamps etc. fabricated out of Galvanised steel of different sizes to be fixed with G.I Nuts and bolts and washers.
Supply and fixing of V -Shaped GI Cross Arms (75X40X6 mm) with top Bracket including Clamps, GI Nuts and Bolts.
Providing & fixing of 11 kV Polymeric composite Disc insulator 12 kV,minimum failing load of 45 kN,lighting impulse of 75 kV positive & 80 kV negative and with creepage distance of 320 mm.
Providing, transportation and fixing of 11 KV Pin insulators with G.I Pins (as per the latest specification and drawing approved by the department).
Supply, installation and commissioning of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
SHAH ELECTRICALS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .