Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | ₹32.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹33.5 LRejected-AOC | ₹33.5 L | L2 | Rejected-AOC L2 |
| 3 | L3₹35.6 LRejected-AOC | ₹35.6 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | B PRASAD L3 | RETHEESH D L1 | E P RAMANATHAN L2 |
|---|---|---|---|---|---|---|
| 1.00Appendix A- Reactive Maintenance/Initial rectification works | ||||||
| 1.00 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. | 7.24 | cum | 3,696.89 ₹26,780.27 | 2,558 ₹18,530.15 | 2,558.72 ₹18,535.37 |
| 1.00 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. | 7.24 | cum | 5,861.54 ₹42,461 | 5,561 ₹40,283.88 | 5,561.23 ₹40,285.55 |
| 1.00 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | 617.5 | sqm | 13.04 ₹8,052.20 | 12.35 ₹7,626.13 | 12.37 ₹7,638.48 |
| 1.00 | OD158830/2025-2026:Mix seal surfacing -Providing laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80- 100 KN capacity and finishing to required level and grade
By manual means | 665 | sqm | 301.84 ₹2.0 L | 267 ₹1.8 L | 286.36 ₹1.9 L |
| 1.00 | OD158829/2025-2026:
Providing and fixing of DLP board for Running contract work with Non-retro-reflectorized Vinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 nun thick/ aluminum composite material sheeting 4 rum thick with area not exceeding 0.9 sqm, with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 5Oinm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with M 1ñ grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. | 6.48 | sqm | 6,516.43 ₹42,226.47 | 6,182.5 ₹40,062.60 | 6,182.57 ₹40,063.05 |
| 2.00Appendix B- Premonsoon works | ||||||
| 2.00 | 2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area | 2.85 | Hectare | 62,042.57 ₹1.8 L | 58,863 ₹1.7 L | 58,863.92 ₹1.7 L |
| 2.00 | OD158820/2025-2026:Engaging crane for cutting the tree | 30 | hour | 1,482.59 ₹44,477.70 | 1,406.6 ₹42,198 | 1,406.63 ₹42,198.90 |
| 2.00 | OD158823/2025-2026:Providing wood cutting machine for cutting the trees | 30 | each | 2,721.71 ₹81,651.30 | 1,633.5 ₹49,005 | 1,633.5 ₹49,005 |
Tender Value
₹33.5 L
EMD Value
₹50,000
Closing Date
26 Dec 2025, 3:00 pmClosed
Executive Engineer
PWD Roads Division Alappuzha
GENERAL-RM / 2025-26 - RC 2 Phase 1 /Zone IV- One year running contract for various PWD roads under Roads section Cherthala in Alappuzha district- 9 roads stretches for a total length of 18.41Km-General Civil Work
2025_PWD_822479_1
WD/RB/TR/17558/2025_5_1_1
Open Tender
Civil Works - Roads
365 days
Cherthala
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,760
Yes
₹50,000
Yes
17 May 2026
18 Dec 2025
29 Dec 2025
18 Dec 2025
26 Dec 2025
18 Dec 2025
Appendix A- Reactive Maintenance/Initial rectification works
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD158830/2025-2026:Mix seal surfacing -Providing laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80- 100 KN capacity and finishing to required level and grade By manual means
OD158829/2025-2026: Providing and fixing of DLP board for Running contract work with Non-retro-reflectorized Vinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 nun thick/ aluminum composite material sheeting 4 rum thick with area not exceeding 0.9 sqm, with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 5Oinm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with M 1ñ grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
Appendix B- Premonsoon works
2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area
OD158820/2025-2026:Engaging crane for cutting the tree
OD158823/2025-2026:Providing wood cutting machine for cutting the trees
OD158821/2025-2026:Engaging Wood cutter for cutting trees and branches standing in dangerous condition
OD158818/2025-2026:Engaging Tipper for removing wood and materials from road side as per the direction of Deptl Officers etc
OD158822/2025-2026:Enganging JCB for emergency works.
55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.
OD158819/2025-2026:Engaging Man Mazdoor
OD158817/2025-2026:Engaging Heavy load mazdoor
Appendix C- Proactive/Preventive maintenance
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD158833/2025-2026:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade.
OD158832/2025-2026:Filling up potholes with bituminous ready mix compound ( 25 Kg bag) and compacting by ramming to get a compact surface including cost of material, laying charges, transportation to site etc. ( Rate is arrived for a bag of 25 kg)
12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer
12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
OD158831/2025-2026:Engaging Labour with passenger car not less than 1000 CC for conducting and reporting routine inspection for 1km for the entire length of project at a frequency of 7 days through out there agreement period of running contract as directed by departmental officials
Appendix D- Emergency works
OD158824/2025-2026:Engaging Wood cutter for cutting trees and branches standing in dangerous condition
OD158827/2025-2026:Providing wood cutting machine for cutting the trees
OD158825/2025-2026:Engaging Man Mazdoor
OD158828/2025-2026:Engaging Tipper for removing wood and materials from road side as per the direction of Deptl Officers etc
OD158826/2025-2026:Enganging JCB for emergency works.
8.45:Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1378466.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_1378466.xls
BOQ • 0.25 MB
RCbid.pdf
Tender Documents • 1.65 MB
Epayment.pdf
Tender Documents • 0.07 MB
Prelemenaryagreement.pdf
Tender Documents • 0.24 MB
Affidavit.pdf
Tender Documents • 0.32 MB
Integrity.pdf
Tender Documents • 0.52 MB
Tenderform.pdf
Tender Documents • 0.41 MB
SpcialConditions.pdf
Additional Documents • 0.43 MB
Download all tender documents and submit your bid