C/O Residential Accommodation for HPPWD employees at Nohradhar

Amount

Excavation in earth work in hilly area in all heights and depths, in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution, etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/ excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and level as shown on the drawings or as directed by the Engineer-in-charge, in conformity with the requirement of technical specification for Rural Roads August, 2004 ,and clause 16.2 of General Conditions for contract to achieve designed formation width including hauling and stacking of material useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, trimming filling of unevenness ,blindage and finishing of the road to specified dimensions including disposal of surplus materials with all leads and lifts at the location specified in the tender document or as directed by the Engineer-in-Charge for smooth riding. .Any loss to the public and private property during the course of excavation shall be absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases.

Excavation in foundation trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 ( One thousand nine hundred ninety) volume-I(One) and sorting out useful/un-useful materials and transportation of the unusefull materials for disposing at dumping site ( to be arranged by the conctractor) as per satisfaction of Engineer-in-Charge through all ,modes of transporation including head load, animal load or mechnical means alongwith its levelling fine dressing and with all kinds of labour, machinaries, tools equipments and safety measures and incidental necessary to complete the work by mechanical means and labours ( If required). All usefule materials such as stones, shingles aggregate and slate shall be properly stacked at site to the maximum possible extent in all leads,and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-Charge Any loss to the pulic and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respected including all incidental charges.

Excavation in drains and channels etc. in earth work in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including dewatering where ever required, setting out to required lines,levels as shown on the drawings and as directed by the Engineer-in-Charge at site, according to the HPPWD specification of 1990-Volume-I, and shorting out useful and un-useful materials and stacking the same in all leads,lifts and trensportations of the usefull materials for filling in roadways embankments for grades improvements and levelling to required grades and then disposing of surplus excavated earth in acquired width of road on or approved dumping sites through all modes of transpsportation including head load animal load or mechanical means alongwith its levelling fine dressing and all labour, mechnieries materjials, tools, equipments and incicental necessary to complete the work by mechanized means and labouor(if any required).All useful materials such as stone single, aggregate and slates shall be sorted out and stacked along road side to the maximuim possible extends in all leads,lifts through all modes of transportation and all others incidental charges any loss to the public and private properities during the course of executjion and disposal of serviceable and un-serviceable materials shall be the absolute responsibility of the contractors and shall have to be duly compensated by him in all respect.

Filling in plinth with course sand under floor inclduding watering ramming consolidating and dressing complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Boulder fillinghand packed under floor ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing form work with steel plates 3.15mm T Three point Fifteen Millimetre) thick welded with angle iron in frame 30x30x5 mm ( Thirty isto Thirty isto Five Millimetre) so as to give a fair finish including centring shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all heights in all floors and removal of the same for in-situ reinforced concrete and plain concrete work in :-,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Foundation footing bases of columns etc and mass concrete including plinth beams and columns upto plinth levels.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like :-Floor etc. upto 200mm in thickness

Vertical surface such as wall

Columns, pillars, posts and struts :- (a) Square rectangular or polygonal in plan

Stair case with sloping or stepped soffits excluding landing.

Beams, cantilever, girders and lintels :- Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from floor.

Edges of slabs and breaks in floors and walls under 20cm wide

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying cement concrete 1:6:12 ( One cement:Six sand Twelve gradede stone agreegate 40mm nominal size and curing complete excluding cost of centring and shuttering in foundation and plinth ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing an laying cement concrete 1:8:16 ( One cement Eight graded stone aggregate 20mm nominal size and cuting complete on slab and floor excluding the cot of form work screed laid under flooring ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying plain cement concrete 1:4:8 (One cement is to four sand is to eight graded hard crushed stone aggregate mechanically mixed and vuberated in foudationor similar works complete works complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing weep holes in brick masonry/stone masonery plain/reinforced concrete abutment wing wall ruturn wall with 100mm dia AC pipe extending throught the full width of the structure with slopes of i(V):20(H) towards drawing face complete as per drawing and technical specification clause 614,709,1204.3.7 . ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

(a) Foundation footings and bases of columns etc. and mass concrete

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever.

Vertical surface such as wall ( any thickness but not less than 0.1 mtr thickness ) attached with pillasters butresses, plinth and string courses and the like.

Columns, pillars, posts and struts :-

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing :-

Lintal beam girders bressumers and cantilivers upto floor two level

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete including cost of form work and excluding reinforcement for reinforced concrete work.in:-,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Moulding as in cornices window sill

Providing and laying cement concrete 1:2:4 mix (1 cement:2 sand: 4 aggregate 20mm nominal size) for reinforced concrete chajjas not exceeding 10cm. Thickness upto floor two level centering/form work and curing complete excluding cost of reinforcement.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1cement :2 sand :4 stone aggregate 12.5 mm nominal size) and curing complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent ) using 1.70 kg per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Applying cement slurry on R.C.C. slab or cement conc. Work using 2.75 kg ( Two pont Seventy Five kilogarmme) of cement per sqm. Of floor area before laying cement conc. Flooring i/c roughening ,cleaning of the conc. Surface complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing mild steel/Tor steel reinforcement including cost of binding wire for R.C.C. work including bending, binding and placing in position complete. Tor steel.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Second class brick work using common burnt clay building bricks in foundation and plinth cement mortar 1:6 (1 cement : 6 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Second class brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:6 (1 cement : 6 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Second class brick work using common burnt clay building bricks in foundation and plinth cement mortar 1:4 (1 cement : 4 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Second class half brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Second class half brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Random rubble masonry/ polygonal rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement :6 sand : 12 graded stone aggregate 20 mm nominal size ) at plinth level in:-Cement mortar 1:6 ( 1 cement: 6 sand) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 35 mm thick factory made panelled door shutter with non decorative phenol bonded termite resistant and water proof core of block board with frame of 1st. Class hard wood and well match commercial three ply veneer with vertical grain or cross band and face veneer both face of flush door , IS No 2202 of WUD- TECH OR ITS EQU. complete as per Arch. drg.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing P.G.I.sheet lining with 0.63 mm thick sheet of approved quality butt jointing and nails etc. complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 12mm thick 150mm wide pelment with 25mm (Twenty Five Millimetre) diamtre wooden curtain ,rods and brackets in cluding fixing 25x3mm (Twenty Five isto Three Millimetre) M.S. flat at 10 cm (Ten Centimetre) long and plugs etc. complete. 1st. Class Indian Teak wood ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm or doors, windows, clerestory windows including bright finished black enamelled iron hinges with necessary screws. 35 mm ( Thirty Five Millimetre) 2nd. class deodar wood. ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M.S. flats, squares or round bars with round headed bolts and nuts or by screws. Plain grills.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts & nuts screws etc. complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

300 x 16 mm (Three Hundred isto Sixteen Millimetre)

250 x 16 mm (Two Hundred Fifty isto Sixteen)

Providing and fixing anodized aluminium tower bolts (berrel type) anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

250 x10 mm. (Two Hundred Fifty isto Ten)

150x10 mm (One Hundred Fifty isto Ten Milimetre)

Providing and fixing anodized aluminium handles anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

125 mm (One Hundred Twenty Five Millimetre)

100 mm (One Hundred Millimetre)

Providing and fixing bright finished brass furniture handles including necessary screws complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing bright finished brass door stoper 100 mm including necessary screws complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing brass megnatic catcher including necessary screws complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 65x35mm. Special quality chromium plated bright finished brass cup board locks with six leavers including screws complete. (Indian make),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing anodized M.S. single acting spring hinges with necessary screws etc. complete.(i) 150 mm ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing anodized M.S. double acting spring hinges with necessary screws etc. complete.(i) 150 mm ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 19mm thick Commercial Board water proof in shelves/box with but joint i/c fixing with nailsand screws etc.complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on board/ ply wood sheets with approved adhesive and nail etc. complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing square edges cover fillets (beading) 19 x 6 mm section i/c mitring at junctions with wood screws and nails complete. In 1st. Class D/Wood ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 6.00 mm ply of standerd quality ISI marked and approved shade with screws and nails complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Vibro hydraulically compressed and polished terrazzo tiles 300 x300x25 mm of N.T.C. ISI marked No. 1237 in 70%white cement & 30% gray cement. the ratio of marble chips shall be 55% white &15% each green, yellow and mahroon The size of chips shall be 0,B &2B laid in floors and tread of steps, on a bed of 25 mm average thickness of cement mortar1: 6 (1 cement : 6 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile (where ever required ) including rubbing and polishing complete with tiles of following shades :- medium shade ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Vibro hydraulically compressed and polished terrazzo tiles 300 x300x25 mm of N.T.C. ISI marked No. 1237 in 70%white cement & 30% gray cement. the ratio of marble chips shall be 55% white &15% each green, yellow and mahroon The size of chips shall be 0,B &2B laid in skirting & rises of steps , on10 mm average thickness of cement plaster1: 3 (1 cement : 3 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile (where ever required ) including rubbing and polishing complete with tiles of following shades :- medium shade ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

40 mm (Forty Millimetre) thick

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neatcement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying water proofing treatment with Dr. fixit torch shield (P-3160-3 mm) 0n solvent based bitumen primer on clean and leveled surface @ 3.5 sqm./ liter and after1-2 hourof primerapply the Dr. fixit torch shield roll by using gas burner to heat substrate & under side to softening points complete as per Arch. Drg. and specification and as per directions of Engineer-in- charge.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Kota stone slab flooring 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 sand) laid over and jointed with grey cement sluurry mixed pigment to match the shade of slab including rubbing and polishing complete.25 mm thick.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and laying granite stone in flooring 20 mm (average) thickness base of cement mortar 1:3 (1 cement :3 sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20 mm thick.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing Fibre Sheet roofing with galvanised iron J or L hooks and nuts 8 mm dia with bitumen and G.I limpet washers filled with white lead complete excluding the cost of purlin refter and trusses.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing on walls face PVC (D-Plast) rain water pipes of working preshure of not less then 4.5kg /sqm including filling the joints with approved adhesive complete. 150 mmdia pipe ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing on walls face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

150 mm (One Hundred Fifty Millimetre) dia PVC plain bend

150 mm (One Hundred Fifty Millimetre) dia PVC shoe

Providing and fixing PVC clamps ISI marked of approved design to PVC. pipes with steel screws and rawal plugs completes. 150 mm (One Hundred Fifty Millimetre) dia ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

In trusses and trussed purlins in buildings.

In gratings, framed, guards, bars ladders and railing, brackets and similar works :-

Providing and fixing angle iron door frame manufactured from M.S.angle section of 40x40x4mm ,thickness and M.S. flat 50x4 mm in combination as per design and Drg. including hinges jamb,lock jamb,beed and welded continously with M.S. flat 50x4mm (Fifty isto Four Millimetre) and cleat for fixing MS. hold fast 40x4mm ( Forty isto Four millimetre) of length 20cm (Twenty Centimetre) complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing angle iron door frame (double rebate) manufactured from M.S.angle section of 2 angle 40x40x4mm (Forty isto Forty isto Four Millimetre) ,thickness and M.S. flat 50x4 mm in combinationas per design and Drg. including hinges jamb,lock jamb,beed and welded continously with M.S. flat 50x4mm ( Fifty isto Four Millimetre) and cleat for fixing MS. hold fast 40x4mm of length 20cm complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing Window and ventilators frames manufactured of channel section 75 x 40 (Seventy Five into Forty) millimeters for end frames and for center frame channel section 75 x 40 (Seventy Five into Forty) millimeters with Mild Steel flat (Seventy Five into Four) millimeters. in combination welded together to make one frame with making square steel section with Mild Steel flat of 20 x 4 (Twenty into Four)millimeters and 12 x 4 (Twelve into Four) millimeters., shutters of rolled steel section F-7B (Seven B) section including glass panes of 4 (Four) millimeters thick in glazed panel and wire gauge of designation 85 (Eighty Five)with 0.56 (Zero point Five Six) millimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25 x 25 x 3 (Twenty Five into Twenty Five into Three) millimeters and flat of 12 x 4 (Twelve into Four) millimeters in sash bars duly welded of all corners and joints properly, hold fast of Mild Steel flat 200 x 50 x 5 (Two hundred into Fifty into Five) millimeters. duly welded at corner and joints of all steel section, embedded in cement concrete block 1:3:6 (One cement : three sand : six graded crushed stone aggrigate twenty milimeters nominal size of size 100 x 100 x 100 mm. size (One cement isto Three sand isto Six graded stone aggregate Twenty millimeters. nominal size of One hundred into One hundred into One hundred) including providing and fixing of fittings that is handles, tower bolts hooks and eyes and applying a coat of primer with red lead paint and fixed in position complete in all respect as per architectural drawing and direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washers plates complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50 mm (Fifty Millimetre) dia welded in straight length over M.S. flat at top of vertical blusters including one coat of red oxide priming coat complete ( M.S. flat and balusters of railings shall be masured and paid separetly),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Painting two coats (excluding priming coat )on new steel and other metel surfaces under coat with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Polishing two coat with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler. ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Applying Birla white care putty over plaster surface after throughly brushing the surface free from morter drops.dust, loose materials and other foreign matters sand papering smooth to give final finish to the surface complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Finishing wall with water proofing exterior grade emulsion of Asian paint of approved design or its equivalent on undecorated wall surfaces (TWO COAT) to give an even shade and final finishafter throughly cleaning the surface of all dirt, dust and other foreign matters and sand papering Smooth.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth ( in Cm 1 : 6 ),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including. Cement mortar 1:6 (1 cement : 6 sand),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

20 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (Thirty Centimetre) in girth and finished even and smooth including. Cement mortar 1:4 (1 cement : 4 sand),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Distempering two coats with Synthetic/ Acrylic distemper of approved brand and manufacture and of required shade on undecorated wall to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture oafter thoroughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surfaces even and sand papered smooth.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing under layer for plinth protection of 75mm (Seventy five millimeter) thick (unconsolidated)bed dry brick/stone aggregated 40mm (Forty millimeter) nominal size will rammed and consolidated and grouted with fine sand including preparation of groundmass per HPPWD specification 1990-Volume-I,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing plinth protection 50(fifty) mimimetre thick in cement concrete 1:3:6 ( Once cement:Three sand:six graded stone aggregate 20mm nominal size ,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Construction Course rubble hammer dressed "U" shape open surface drain with side wall 15x22 ( Fifteen into Twenty two) centimeter in cement mortar 1:6 ( Once Cement: six sand) and inside plastering with cement plaster 1:3 ( One cement:three sand) including earth work and laying 10cm (Ten centemeter) cement concrete in 1:5:10 ( Once cement:five sand:Ten graded stone aggregate) of 40mm (Forty milimetre) nominal size) and 7.5cm ( Seven point five centemetre) cement concrete 1:2:4 ( Once cement:Two sand:four graded stone aggregate 20 (Twenty)milimetre nominal size and finished with a floating coat o neat cement complete as per standard design.,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 25 mm (Twenty Five Millimetre) dia ,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm nominal bore groun floor to storage tank

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15 mm dia (Fifteen Millimetre) ,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Making connection of galvanised steel distribution branch with GMS main 20mm to 40mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Fixing water meter stop-cock in GMS tube i/c necessary fittings such as mild steel galvanished jam nut .sockets etc. complete cutting and making long screws (water metre and stop cock to measured and paid for separately) 15 mm nominal bore,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Construction chamber 300mm x 300mmx500mm (Three hundred milimeter into threehundred milimeter into five humdred milimeter) inside size for stop cock with C.I.surface box 100mm x 100 mm x 75mm(One hundred milimeter into one hundred milimeter into seventy five milimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm (Seventy five milimeter) thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) fineshed with a floating coat of neat cement including curing complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

For W.C.

For kitchen & bath Room

Providing and placing in position water tank make SINTEX having capacty of 1000 liters(One thousand liyter) each tank necessary fitting including over flow pipe scour pipe etc. and pads required for in let and out let and inside painting ball valve with cover and locking arrangements including painting of good quality complete in all respect.,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Rain water harvesting Tank 2000 ltr

Providing and fixing 100mm ( One hundred milimetre) dia floor trap of self cleaning design with sand cast iron screwed down or hinges grating without vent arm complete including cost of cutting and making goods the wells and floors,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110mm to 90mm (One Hundred Ten to Ninty Millimetre)

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110mm (One Hundred Ten Millimetre) nominal size

90mm nominal size (Ninty Millimetre)

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm dia (Ninty Millimetre)

Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm (Ninty Millimetre) dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm dia (Ninty Millimetre)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm dia(Ninty Millimetre)

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm dia (Ninty Millimetre)

Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm (Ninty Millimetre) dia

Providing and fixing PVC double equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm dia (One Hundred Ten Millimetre)

90 mm (Ninty Millimetre) dia

Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive complete ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) dia

90 mm (Ninty Millimetre) dia

Providing and fixing PVC cowl ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

110 mm (One Hundred Ten Millimetre) nominal diametre :-

90 mm (Ninty Millimetre) nominal diametre :-

Providing and fixing vitreous china wash down water closet (European type W,C.pan/ Indian type W.C. pan) with integral P or S trap if required, including jointing the trap with siol pipe in cement pipe in C.M. 1:1( 1cement :1 sand ) (seat and cover to be measured and paid for separately) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Orissa pattern :- No.2071 size 580x440 mm of CERA / HINDWARE.

Providing and fixing 10.0/12.50/15.00 liters viterious china low level flushing cistern with a pair o C.I or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball with poilythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend inclluding cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separatelyl),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1025,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

No 1025 size 550x400

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing PVC. 110mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete. 110 mm dia.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing M.I. Union for wash basin or sink ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

32mm (Thirty Two Millimetre) dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. complete. 110 mmX 90 mm,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing C.P. brass waste for wash basin or sink ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

32 mm (Thirty Two Millimetre) dia

Providing & fixing 32 mm (Thirty Two Millimetre) dia, PVC waste pipe for wash basin or sink including check nut ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing & fixing 100 mm (One Hundred ) dia, C.P. grating ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing 600mmx450mm (Six Hundred isto Four Hundred Fifty Millimetre) bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

600 X 20 mm ( Six Hundred isto Twenty Millimetre)

Providing and fixing 600mmx120mm ( Six Hundred isto One Hundred Twenty Millimetre) glass shelf with C.P. brass bracket and guard rail complete,,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing C. P. Brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing prayag double bowl Kitchen sink with C.I. OR M.S. brackets painted white i/c cutting holes in walls and making good the same but excluding fitting ISI marked 304 grade 1250 D ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

size 1125x500x200 mm CERA/ HINDWARE

Providing and fixing CP brass bib tap with capstan head,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) dia :-

Providing and fixing CP brass pillar tap with capstan head ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) dia :-

Providing and fixing C.P.brass angle cock without nuts and pipe,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) dia :-

Providing and fixing PTMT push cock of approved quality and colour ( 20 mm female thread),as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing C.P.brass stop cocks ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) dia :-

Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts .(45cms length ):-,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) nominal bore :-

Providing and fixing brass full way valve with wheel ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

15mm (Fifteen Millimetre) nominal bore :-

20 mm (Twenty Millimetre) nominal bore :-

Providing and fixing 15 mm (Fifteen Millimetre) mixer for kitchen sink with top/ bottom swinging spout ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing Water pump to Lift rain water ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Constructing manhole with R.C.C top slab in 1:2:4 mix (One cement : Two sand : Four graded stone aggregate 20mm (Twenty milimeter) nominal size foundation concrete1:4:8 (one cement : four sand : eight graded stone aggregate 40mm (Forty milimeter) nominal size) inside plastering 15mm thick with cement mortar 1:3 (one cement : Three sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (One cement : Two sand : four graded stone aggregate 20mm(Twenty milimeter) nominal size) finished smooth complete including curing and testing:,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Inside size 800mm x 800mm (Eight hundred into eight hundred milimeter)and 500mm (Five hundred milimeter)deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg . (weight of cover 23 kg and weight of frane 15 kg.)

With 200mm(Two hundred milimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (One cement :Threesand).,as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Providing and fixing cast iron cover 300x300mm (three hundred into three hundredc milimetre) with frame for gully trap the weight of cover to be not less than 4.53 kg (Four point fifty three kilogramme),as per HPPWD specification 1990-Volume-I,including carriage of all labor, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Suppply and filling broken stone/brick bat in soak pit of 40mm size as per the direction of Engineer-In-Charge.,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Supply and stacking sand for sand encasing,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

Supply and fixing cst iron cover without frame for main holre for 500mm internal diameter.(Medium Duty) the weigh of cover tobe not less than 58 kg,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.

SEXIIR5915

vijay singh thakur