RETENDERPW5/53217/19 Electrification of Akkolil Community hall (proj no-1040/19-20)

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate ceiling rose

Single control light point without ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug point with 6 A, 5 pin plug socket controlled by 6 A switch in seperate switch board as that of light points.

Supply, conveyance installation testing and commissioning of 230 V, 50 hz, 1800 Lumen, 0.8 pf, 15% THD, 2.5 KV Lighting surge protection type 18 w 1200 mm LED pre-wired light fittings complete with all accessories . directly on wall or ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire etc as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of 1200mm sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required.

Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W CFL to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.

Supply, Conveyance, installation, testing and commissioning of Surface mounting 70 W LED down light fittings (IP65)of all types directly on roof slab/on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring etc as required(Crompton-clean lux II LBRP 40 CL 22 CD) or Equivalant

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with shade and giving connection etc as required

Supply and providing 14 W CFL types and power rated lamps in the existing fittings as required

Supply, conveyance, installation, testing and commissioning of 100 Watts single piece LED light fittings suitable for roadway installation with pressure die-cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on 'B" class GI pipe of 1 mts length, 25mm dia or suitable size bent to shap/ cut and welded to shape clamping the same on the existing pole using GI mounting clamps and giving connections with 1 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ LT)

Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

Supply, conveyance, installation, testing and commissioning of 225 mm, 1 phase, 1400 RPM, lightduty sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS.

450 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required. a. 20 mm dia medium gauge

25 mm dia medium gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. a. 1.00sq mm 2 run(speaker)

b. 1.50 sq mm 3 run

2.50 sq mm 3 run (PP)

6..00 sq mm 4 run + 2.5 SQ.MM 2 RUN

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of 35x25sqmm sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required

Supplying siemens / tropodur type nickel plated compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of 25 sq. mm sizes as required.

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for 25 sq. Mm sizes of cables as required.

Supply of superior quality aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. a. 25 sq mm

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required a. 4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

4way (8+24) - three phase double cover (IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required a. 63 A four pole mini break isolator

40 A four pole mini break isolator

40 A, 4 pole, 30 mA RCCB

6 A to 32 A, 10 kA, SP MCB (C curve)

40 A, 10 kA, TP MCB (C curve)

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required a.3 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. a. 3 module white/ off-white

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B) a 16 A SP 1 way switch

6A/16 A Universal socket

Supply and providing pipe earthing as per IS 3043 with 3.60 m long 40 mm dia B class GI pipe, GI funnel with weld mesh, filling required quantity of charcoal & salt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in hard soil)

Supply and providing 300x300x6mm sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. a. 2.00 mm copper conductor (14 SWG)

2.65mm copper conductor (12 SWG)

3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. a.2.00 mm (14 SWG)

2.65 mm (12 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required a. 25 x 3mm brass bolt & nut

25 x 6 mm brass bolt & nut

Fabrication, supply & installation of dust and vermin proof, wall mounting, Sintex make meter box of 600x600x 214 mm size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

32 A, 415 V, DIN type fuse base.

63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

20A, 230 V, DIN type fuse

Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of 63A, 4 pole ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO)

Preparation of all drawing submitting and approvel from KSEB, obtaining power allocation, submitting of completion certificates and arranging inspection, getting sanction and energisation certificates from KSEB and obtaining power connection etc: for commissioning of the whole installation in the permises.

Supply, installation and commissioning of IR Camera 2 MP High Quality HQIC Pro Image Sensor. 6 mm lens. minimum illumination 0.ll-ux@(F1.2, AGC ON)0 lux with IR,BNC output,IR Range of 30 m or above , true day/ night, IP66 weather proof, AGC, AWB and BLC, CE" FCC and RoHS Cerrified, working on 12V DC supply and with all necessary mounting brackets and connecting pins and with 2 years warranty.

Supply. Installation, Testing and commissioning of 16 channel HD DVR with H264 video compression 1080P/VGA/WD1/4CIF/CIFrecording resolution, support 2 SATA HDD up to 8 TB (2x4 TB), USB2.0, RJ45 Ethernet . 8 channel BNC input, HDMI & VGA Video Output and with 2 years warranty.

Supply, Installation, Testing and Commissioning of 32" LED TV with wall Mount bracket and all accessories including necessary connecting cables

Supplying & Drawing 3+1 (RG59+0.,5X3 copper) Co-axial Cable conforming to relevant standards through the existing conduit and giving connection to the surveillance cameras

Supply & commissioning of l KVA 168 vAH Digital UPS with minimum one hour back up time

Supply, conveyance, installation, testing and commissioning of Hot dipped Galvanised ( internally and externally) seamless,Octagonal pole of overall height 9 Mts with Four arm ring type breaket of 45 cm radius with winch , suitable size ss rope with out moter . The top dia 70 mm, bottom dia 175mm having sheet thickness 3mm. The pole shall be with base plate of 225x225x16 mm and 4 nos required size of foundation bolt. The pole shall be mounted on suitable size oundation (design to be got approved) with 4A SP 'c' curve MCB, loop in loop out terminals block, required dia GI/ PVC pipe shall be provided in the foundation for taking cable in & out from the pole, 3 Core 1.5 sqmm unarmoured PVC insulated round copper cable from loop in loop out to light fixture etc with all required accessories. The cost of the civil foundation is not considered in this item.

Supply, conveyance, installation, testing and commissioning of 170 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die-cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 5 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ LT)

Earth work excavation in hard soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work (also for earth cover)

Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel (also for earth cover)

Supply and clamping the following sizes of PVC pipe on wall with all required accessories including cutting and making good the walls, colour washing etc. as required as protective covering to cables. 63mm dia PVC pipe (8kgf/cm2)

Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2.50 sq mm 3 run

Supply and providing pipe earthing as per IS 3043 with 3.60 m long 40 mm dia B class GI pipe, GI funnel with weld mesh, filling required quantity of charcoal & salt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 3.15 mm GI conductor (10 SWG)

25x3mm GI srtip

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in hard soil). 25 x 3 mm GI strip

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. 3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 25 x 6 mm brass bolt & nut

Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

Supply & laying of one number 2 core 6 sq.mm PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

do 2x6 sq. Mm cable gland

do 2x6 sq. Mm cable Aluminium socket

4 sqmm-16 sq mm with 12 mm wide x 1 mm thick copper earth clip

Fabrication , supply & Installation of dust and vermin proof wall/ floor mounting metering cubicle construction made from 2.00 mm CRCA sheet as per approved necessary supports made from the same sheet to fix KSEB meters,fuse unit, CT'S compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring

Supply and providing 2 MM size of SMC sheets in the panel as barriers & shrouding using required bolts and nuts including cutting to shape etc., as required.

U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for metering cubicle made out of suitable size , slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required 6 A to 25 A, 10 kA, DP MCB (C curve)

25 A, 2 pole, 100 mA RCCB

Single dial timer unit analog type

2 pole 32 A contactor

Control Relay

32A,415V HRC type kit kat fuse unit

25A HRC fuse link

2 way neutral Link

Aluminium anidised danger nitice board