Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L1 | Accepted-AOC ACCEPTANCE OF CONTRACT | |
| 2 | L2₹46.4 L+₹60,625 (1.32%)Rejected-AOC 63 MANDIR LANE BALLUPUR CHOWK DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC R | |
| 3 | L3₹50.0 L+₹4.2 L (9.19%)Rejected-AOC | L3 | Rejected-AOC R | |
| 4 | L4₹53.8 L+₹8.0 L (17.6%)Rejected-AOC | L4 | Rejected-AOC R |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
DAY TO DAY MAINT AND PETTY REPAIRS OF OTM AND MD ACCN UNDER AOR OF AGE BR II UNDER GE IMA DEHRADUN
2022_MES_531786_1
GE/IMA/T-36/2022-23 9218/E8
Open Tender
Support/Maintenance Service
Item Rate
334 days
GE IMA Dehradun
NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹90,000
Yes
16 Sept 2022
17 Jun 2022
28 Jul 2022
5 Jul 2022
26 Jul 2022
5 Jul 2022
Amount
Taking down 15 mm dia unserviceable bib cock/ stop cock/Pillar cock/Angle cock of any pattern or of any type and removing from site complete all as directed.
Taking down 15 mm dia bib cock / stop cock/Pillar Cock/Angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers, spindals, caps etc and refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be measured and paid for separately.)
Supply and fixing bib cock PTMT standard 15 mm dia with capastan head complete male or female as reqd and as directed by Engineer Incharge.
Supply and fixing bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete.
Supply and fixing stop cock brass/ cast copper alloy 15 mm dia with crutch or butterfly handle, screwed down high pressure complete.
Supply and fixing stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge.
Supply and fixing 15 mm dia angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete.
Taking down 20 mm dia unserviceable stop cock/Bib cock of any pattern or of any type and removing from site
Taking down 20 mm dia stop cock/Bib cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or refixing old serviceable stop cocks any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be measured and paid for separately)
S & F 20 mm bore stop valves,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for GI pipe or for GI unions and fixed completed all as specified.
S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy Capstain head, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed complete.
Supply and fixing in repairs ball Cock PTMT 20 mm dia high pressure with alluminium rod epoxy coated and HD Ball and Brass flynut complete, screwed for iron pipe or for brass ferule fixed complete all as specified.
S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified.
Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete.
All as per serial No 14 above but with Swan Neck 15 mm size complete.
S & F in repairs CP shower rose with arm length 200mm & flange 15 mm bore pipe complete all as specified.
Supply and fixing in repair Waste coupling 40 mm , brass chromium plated for sinks with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal completed.
Supply and fixing in repair Waste Coupling 32 mm , brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal. complete all as specified and directed by the Engr-In-Charge.
S & F PVC Connections 15 mm size with PTMT nuts of length 600 mm completed.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.
S & F in repairs Vitreous China wash down water closet pan, white including PVC polymer water closet seat, black, closed pattern with flat bottom, cover and Stainless steel hinging device.
S & F in repairs Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and PVC waste pipe up to floor trap and fixed complete all as specified.
S & F in repair Beveled edge Looking Mirror 5 mm thick size 600 x 450 mm fixed on commercial ply wood 6 mm thick fixed to wooden plugs with chromium plated brass screws and 1" Spacers with cup washers and fixed all as specified.
S & F in repairs Toilet Paper Holder chromium plated and fixed complete all as specified.
S & F in repairs 10 ltr capacity PVC low level flushing cistern, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed all as specified.
All as per serial item No 25 above but dual flush type fixed complete.
S & F in repair Flush Pipe of polyethylene/ PVC, 32 mm dia, for low level flushing cistern and fixed all as specified.
S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and stainless steel hinging device and fixed all as specified.
S & F in repairs PVC Waste Pipe 32 to 40 mm dia & length (expandable 1 mtr) for WHB/Sink up to floor trap and fixed complete all as specified.
S & F in repairs Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness with fixing brackets, end feneals etc. as approved by Engr-in-Charge
S & F in repairs Tublar towel rail 24" long , 20 mm dia, Brass Chromium plated complete all as specified.
S & F in repairs PTMT towel rail 24" long, complete all as specified
S & F in repairs mirror cabinet in PTMT Make Prayag and fixed complete all as specified
S & F in repairs PVC Jet spray with 1.50 m tube for wash down water closet (pedestal pattern) and fixed complete all as specified
S & F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified
S & F in repairs MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified
All as per serial item No 36 above but 75 mm long complete all as specified.
S & F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified.
S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.
Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
All as per serial item No 40 above but 150 mm long.
S & F in repairs 125 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified
S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Supply and fixing in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 850 to 1000 mm wide complete all as specified.link/hafle. Make-link/hafle/Godrej.
S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.
S & F in repair Small fittings of 2nd Class Hardwood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.m each and fixed complete all as specified.
M & L in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.
S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.
All as per serial item No 49 above but frosted glass complete all as specified.
M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed all as specified.
18 mm thick one side prelaminated colour HDFB Sheet for cup board shutter and frame & fixed at site complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified. Make Hexa, hettich, hafele.
S & F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repairs complete all as specified and directed. Make :Hexa, Hettich, Hafele
S & F Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
S & F Virfied ceramic Dark shade coloured tiles 10mm thick (Square or rectangular) polished,area of each tile exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.
S & F Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. and removing unserviceable stone & rubish of the premises of MOD land.
S&F granite 16-18mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in tile adhesive incl pointing in coloured grout complete all as specified and directed.
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed and removing unserviceable stone & rubish of the premises of MOD land.
M&L for rendering 12 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for new plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty rubbing wall surface until smooth finish achived and finish wall surface even & smooth by roller complete all as specified and directed.
S & F in repairs Health facut with 1.50 m tube and two way CP Bib cock for wash down water closet (pedestal pattern) and fixed complete all as specified
Demolition of brick work or stone/boulder masonry built in CM on cement lime mortor and removing rubbbish of out side MoD land
M&L brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in cement mortar 1:6 complete.
S & F Chequered cement concrete tiles glossy finish Red /yellow colour 25mm thick of any size and pattern as approved by GE as in patches in floor set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over. 20 mm thick cement scral in cement mortar 1:6 complete.
Supply and fixing in repairs Ply Wood 4 mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.
Supply and fixing in repairs Ply Wood 6mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.
Repair to steel Door, Window and Ventilators by spot or running welding including repair of MS Butt Hinges any size to steel chowkets by bringing welding plant at site complete
Taking up or down 15 mm Bore steel tubing and connections, including cleaning complete.
S&F for 15 mm Bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors.
Description all as per serial item No 72 but using old serviceable pipes 15 mm bore dismantled under item No 87 here-in-before
Taking up or down 20 mm Bore steel tubing and connections, including cleaning completed all as specified.
S & F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors.
All as per serial item No 75 but using old serviceable pipes 20 mm bore dismantled
Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for consealed water tubing etc and maling good in Cement Mortar 1:3 or PCC 1:2:4 as reqd complete all as directed
Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete.
All as per serial No 78 above but 15 mm size complete
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repairs PVC Syphon (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repairs complete Veta Washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
Taking down low level flushing cistern any capacity and refixing after carrying out minor repairs such as stopping of leakage etc. complete all as directed.
Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with Kmnou solution & drying it again with vaccume cleaner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year)
All as per serial item No 84 above but capacity of water tanks exc 500 ltr and not exc 1000 ltr
S&F in repair covers for PVC over head water tanks 300/500/1000 ltrs capacity (as per sample) triple layer complete all as directed.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) triple layer hoisted and fixed in position complete 500 litre capacity.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) triple layer hoisted and fixed in position complete 1000 litre capacity.
S&F in repairs PTMT/ CP bottle trap 32 mm size for WHB complete all as specified and as directed (As per sample)
S&F PTMT grating 125 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
S&F PTMT grating 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
M&L for preparing new wooden surfaces and applying two coats of synthetic enamal paint over a coat of wood primer complete.
Supply and fixing in repairs CI lid for inspection hole of CI bend, traps Y junction T junction, etc fixed with nut and bolt, fixed as in repair including removing old nuts by drilling or welding complete all as specified and directed.
Supply and fixing in repairs cast Iron bends 100mm dia bore ( any radius), diminishing pieces or tapers ( larger bore measured) in cement joints complete all as specified and directed.
Supply and fixing in repairs MS powder coated peg set of three complete all as specified.
S&F double action spring hinge 100mm long mild steel with steel wire spring stove enameled black all as directed.
S&F 300mm long M.S ordinary Helical door spring incl roller and roller plate all as specified.
Demolition of Cement concrete of any description in any position not otherwise specially provided for Sunken floor etc complete all as specified and directed
M & L for 40mm thick PCC (1:2:4) type B1 (using 20mm grade crushed stone aggregate) as in flooring finishing the surfaces even & smooth without using extra cement.
S & F Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe fixed in repair
S & F Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repairs complete all as specified
Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, grating, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the compaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or higher authority rep in writing. (iv) The area/Location of of complaints will be all MD and OTM accn in AOR of AGE B/R-II. (v) If any complaint not attended by contractor with in 08 hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending thecomplaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all OTM accn in AOR of AGE B/R-II. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the complaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of complaints will be all OTM accn in AOR of AGE B/R-II. (VI) If any complaint not attended by contractor with in 48hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Mason work and obtaining completion from user for resecuring/easing/minor repair to make functional of plastering, PCC Flooing, Tiling, Taking dwon plaster, greating etc by employing experienced Masion with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of Job will be all OTM accn in AOR of AGE B/R-II. (V) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. Note :- (i) T&P including convence to reach door to door for attending the complaints will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of complaint will be all MD and OTM accn in AOR of AGE B/R-II. (iv) If any complaint not attended by contractor with in 08 hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked floor trap of bath room &kitchen etc upto 1st manhole including cleaning of gully/trap and removing the waste material/sludge etc ta a distance n. exec 300m and burring the same in pits complete all as specified and directed by Engr-in -charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of Job will be all OTM accn in AOR of AGE B/R-II. (iv) If any complaint not attended by contractor with in 12hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.
Dewatering of septic tank/soakage well of any depth by pump or by manual after plugging of incoming sewage lines and throwing water into non residential area or in drain/nallah complete all as specified and directed by Engineer-in-Charge.
Cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 300m and burrying in a pit complete all as specified and directed by Engineer-in-Charge.
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
Supply only Capastain head / cap of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.
Supply only Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.
Supply only spindle brass for 20 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
Supply only Capastain head / cap of CP bib tap / CP stop cock 20 mm size complete all as directed by Engr- in-charge.
supply only white cement in 1 kg pack :-Birla white/ACC/LAXMI CEMENT as approved by GE.
supply only Plain sheet glass 3 mm thick of size 90X90 cms
Supply only oil glass putty for glazing
Supply only PVC urinal waste pipe 40 mm
Supply only PVC waste pipe 32 mm
Supply only PVC washer for bib tap 15 mm
Supply only Rain water pipes PVC 110 mm bore
Supply only Rain water pipes PVC 75 mm bore
Supply only Clamps for rain water pipes
Supply only PVC grating 150mm
Supply only WPC Board 18mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/VISHAKA
Supply only WPC Board 6mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/VISHAKAl
Supply only WPC Board 30mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/VISHAKA
Supply only wood ply 6mm thick
Supply only wood ply 4mm thick
Supply only wood ply 10mm thick
Supply only wood ply 12mm thick
Supply only wood ply 18mm thick
Supply Only Mortice lock 75mm
Supply Only Mortice lock 100mm
Supply Only PVC Connection 600mm
Supply Only Door seal 1000mm
Supply Only 100mm waste cupling sink
Supply and fixing 15 mm dia two way angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete.Make Prayag or Equivalent.
Supply Only CP Connection 1200mm long
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified.
S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long. Fixed in repairs
S&F Corner glass shelf assembly with bracket complete all as specified and as directed.
Supply and fixing 15 mm dia push angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete.
Shifting/Issue/Receipt (Exchange)/Loading and unloading of all types of furniture items in different sheds at furniture yard/different Bn/Units/Officers etc., complete all as directed by Engeeneer-in-Charge.
Attending minor repairs of all type of furniture in Yard / Md accn / Units/ Bn/ at different locations in IMA Dehradun complete all as directed by Engeeneer-in-Charge.
Welcome maint polishing/ minor work of all type of furniture at different location at IMA Dehraduncomplete all as directed by Engeeneer-in-Charge.
Maintain of furniture yard i.e. proper stacking of all serviceable/ unserviceable wooden and steel furniture item wise and other work as per requirementcomplete all as directed by Engeeneer-in-Charge.
Meher enterprises
Bhanu Prakash
venus engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .