WBPWD/EE/BED/e-NIQ-46/2022_23

Amount

Supplying and fixing 415V, 315Amp. TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating with suitable neutral Link. S & F 1 no cable end box (16 SWG) (Make: Siemens/L&T/Havells)

Supplying and fixing double door 8 way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. S & F 1 no cable end box (16 SWG) (Make- Legrand / Schneider/ Siemens) Incommer 415V, 36 KA, 160Amp, 4 pole MCCB, Outgoing 1) 415V,10KA, 63A TP MCB - 8 Nos

Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. S & F 1 no cable end box (16 SWG) (Make- Siemens/ L&T/Legrand / Schneider) Incommer 415V, 36 KA, 160Amp, 4 pole MCCB, Outgoing 1) 415V,10KA, 63A TP MCB - 6 Nos

Supply and Laying of PVC/XLPE armoured cable on wall/surface incl. S&F MS saddles with earthing attachment in 2 X 10 SWG (Hot Dip) wire, making holes etc. as necy mending good damages and painting. ( Make: Havells/ Polycab/Gloster/RR Kabel) i) 4 Core 16sqmm. ( LT Panel to Pump Room )

ii) 4 Core 120sqmm. (LT Panel to VTPNDB )

iii) 4 Core 240sqmm. ( CESC/WBSEDCL Meter Panel to LT Panel via TPN SFU)

Suppplying & Fixing Compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE armoured cable as below. i) 4 Core 16sqmm.

ii) 4 Core 35sqmm.( For Existing cable)

iii) 4 Core 120sqmm.

iv) 4 Core 240sqmm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials i) 4 Core 16sqmm.

ii) 4 Core 35sqmm.( For Existing cable)

iii) 4 Core 120sqmm.

iv) 4 Core 240sqmm.

Supplying & fixing medium gauge 65mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Supplying & fixing medium gauge 40mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA-Medium GI pipe.

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F 10 SWG solid GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. a) Average run 8 mtr

Supply & fixing of 4ft 20 Watt 2100 Lumen o/p, colour temperature - 6500 K twin LED light fitting with tube light on the wall with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “Z” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the fitting with suitable size of bolts and nuts incl. S&F EI conduit, “Z” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (Make- Philips, Cat No. TMC 501P 2xT LED 22 W P3242,LED Cat No-Essential LED tube 1200mm 20W865 T8 INDI, similar to Wipro/CG)- brand approved by EIC.

Supply and Fixing 300mm/12'' 1420 rpm exhaust fan with louver shuter on wall with necessary arrangement after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust fan.(Make:EPC)

Supply & Fixing 240 V, 20A,plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl.S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 2x36/0.3 (2.5 sqmm )+ 1x22/0.3 (1.5 sqmm )as ECC (For Power Plug)

S/F of 220V. 14watt LED outdoor type Fittings on 25mm. Dia G.I bent pipe on wall by MS Clamp at the front of Panel room as per direction of E.I.C (Philips. Cat No :- BRP042 LED 14 cw MRSIPSUGR/CG/Wipro)

Dismantling charge of the following items after disconnection the connection like Main Switch, Cable, LT Panel e.t.c as per direction at EIC

(Note :- Rate should be quoted inclusive of all taxes and duties including G.S.T.)

RIDDHI (INDIA)

POWER ELECTRO ON

M/S R. K. ENTERPRISE

CHAKRABORTY ENTERPRISE

T.D.K. ENTERPRISE