KANHANGAD DIST HOSPITAL IP BLOCK FIRE FIGHTING

Amount

Fire fighting works

od101552/2018_2019 : DIESEL ENGINE DRIVEN PUMP:-Supply, installation, testing and commissioning of main diesel engine driven horizontal mounted centrifugal pump, end suction type suitable for automatic operation rated for 38HP, 2280 LPM at 55 MWC high efficiency volute type with cast iron casing, bronze impeller pump coupled to a diesel engine at 1800/1500 RPM vibration damping arrangements, diesel tank with semi rotary pump, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure switch and interconnecting cable from control panel to battery etc.

od101553/2018_2019 : MOTOR DRIVEN PUMP:-Supply, installation, testing and commissioning of horizontal mounted end suction electric motor driven pump suitable for automatic operation rated for 2280 LPM at 55 MWC high efficiency volute type with cast iron casing bronze impeller, pump coppled to SPDP squirrel cage induction motor 30 KW /40 HP, 415V, Three phase 50 Hz. the pump set is foot mounted type including all accessories such as standared coupling, guard, common base frame pad/foundation bolts etc. complete.

od101554/2018_2019 : Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete. The pump set shall be of 3.73KW / 5 HP

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

od101555/2018_2019 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 63A Isolator switch disconnector

od101556/2018_2019 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 100A Isolator switch disconnector

od101557/2018_2019 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 125A Isolator switch disconnector

od101558/2018_2019 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. DOL Starter for 40 HP motor

od101559/2018_2019 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. DOL Starter for 5 HP motort

od101560/2018_2019 : Providing and fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

od101561/2018_2019 : Providing and fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

od101563/2018_2019 : Providing and fixing following 9 A, 3 Pole Mini contactor, AC 3 Rating, AC coil in existing panel and giving connection complete

od101564/2018_2019 : Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete

od101565/2018_2019 : Providing and fixing following metering ct 150/5A 5VA /1A accuracy class 0.5 existing panel and giving connection complete

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

90.12.7.12 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp

90.12.7.16 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 25 sq mm with factory made clamp

9.1.9 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 25 sq. mm (25mm)

od101569/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 25mm dia

od101571/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 32mm dia

od101574/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 40mm dia

od101575/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 50mm dia

od101576/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 65mm dia

od101577/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 80mm dia

od101578/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 100mm dia

od101579/2018_2019 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 150mm dia

od101580/2018_2019 : Supply and providing control panel of fire system with display alarm etc complete with provision for public address as required 12 zone

od101581/2018_2019 : Supply and providing Hooter for audio alarm as required

od101582/2018_2019 : Supply and providing manual Call point break glass type with hammer and chain as required

od101583/2018_2019 : Supplying and fixing of following sizes of light class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 2 Run

od101584/2018_2019 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 1.5 sq mm with factory made clamp

od101585/2018_2019 : Supply and providing sprinkler bulb side wall type 20mm breakable at 68* C as required

od101586/2018_2019 : Supply and providing sprinkler bulb pendent type 20mm breakable at 68* C as required

od101587/2018_2019 : Supply and providing pressure gauge in the existing system as required

od101588/2018_2019 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete

od101589/2018_2019 : SITC of Branch Pipe 63mm dia

od101590/2018_2019 : SITC of Non return valve 80mm dia

od101591/2018_2019 : SITC of Non return valve 100mm dia

od101592/2018_2019 : SITC of Non return valve 150mm dia

od101593/2018_2019 : SITC of Butterfly valve 150mm dia

od101594/2018_2019 : SITC of Butterfly valve 80mm dia

od101595/2018_2019 : SITC of Butterfly valve 100mm dia

od101596/2018_2019 : Supply and installation of the following sizes of cast iron Foot valve with strainer to the pump sets complete with bolts,nut gaskets if any as required etc.- 100mm dia

od101598/2018_2019 : Supply and installation of the following sizes of cast iron Foot valve with strainer to the pump sets complete with bolts,nut gaskets if any as required etc.- 150mm dia

od101599/2018_2019 : Supplying installing testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel

od101601/2018_2019 : Supply,installation,testing and commissioning of Fire Brigade inlet connection with 4 Nos. of 63 mm dia built in Gun metal Non-return valves instantaneous coupling type arranged on 100 mm dia etc. Pipe manifold shall be connected to wet riser main.

od101602/2018_2019 : Supply,installation,testing and commissioning of single acting Air Release Valve with screwed inlet 25mm dia etc.

od101603/2018_2019 : Supplying,installing,testing and commissioning of heat detectors with solid stage design, indicating lamp, mounting base etc.

od101604/2018_2019 : Supplying,installing,testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc.

od101605/2018_2019 : Supplying and fixing of Priming tank of size not less than 1000 liters of storage capacity as required etc.

od101606/2018_2019 : Supplying, installing,testing and commissioning of Cast Iron Ball Valves with fittings of screwed end type- 25mm dia

od101607/2018_2019 : Supply,installing,testing and commissioning or Air cusion vessel made of mild steel of 250mm dia with automatic air release cock,25mm dia drain valve and shutt off. The vessel shall be 120 cm in height etc.complete

od101608/2018_2019 : SITC of Hose 15mt long 63mm dia rubber lined woven jacket

od101609/2018_2019 : SITC of Hose reel conforming to IS 884 30mt long 20m internal dia

od101610/2018_2019 : SITC of Hose cabinet single

od101611/2018_2019 : SITC of Hydrant valve double with stainless steel coupling 63mm dia conforming to IS5290 with cap and chain as required

od101612/2018_2019 : Supplying and fixing of Dry chemical powder type fire extinguisher of 5 kg.s. capacity, with intial filling in brand new Cylinder with power coated finish fitted with Gun metal union, discharge hose, wall mounting bracket etc.complete confirming to IS.2171

od101613/2018_2019 : Supply, erection, testing and commissioning of Coaxial RG 6 PVC iunsulated Cable as per BIS standard

od101614/2018_2019 : Supply, erection, testing and commissioning of Talk back field device .

od101615/2018_2019 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od101616/2018_2019 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

od101617/2018_2019 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od101619/2018_2019 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

od101620/2018_2019 : Supply and providing Fire Escape Route size not less than 16'x16' as required

od101621/2018_2019 : Supply and providing Assembly point boards of 3mm PVC foam board size not less than 16'x16' as required

od101622/2018_2019 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

od101623/2018_2019 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

od101624/2018_2019 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od101625/2018_2019 : Charges for Fire NOC

Bidder Name

RAYAN FIRE PROTECTION SYSTEMS