Resurfacing of Nahar-Kangam-Sigam Road Km. 0/00 to 14/00 (M.D.R.) Dist. Bharuch

Name of Work :- Resurfacing of Nahar-Kangam-Sigam Road Km. 0/000 to 14/000

(M.D.R.) Dist. Bharuch

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Clearing and grubbing road land including uprooting rank vegetation grass 2.72 Hect. 28393.04

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (B) By mechanical

means in area of light jungle.

2 Box cutting the road surface to proper slope and camber for making a base 15484.00 Cum 104.20

for road work including removing the excavated stuff and depositing on the

road side as directed within all lead and lift.

3 Construction of 150 mm thick compacted granular sub base (Grade-I, 4692.00 Cum 1649.33

Crushed B.T. materials of 53 mm to 9.5 mm @ 50%, 9.5 mm to 2.36 mm @

20%, Stone dust 2.36mm below @ 30%) by providing close graded material,

mixing in a mechanical mix plant at OMC, carriage of a mix material to work

site, spreading uniform layers with motor grader on prepared surface and

compacting with vibratory power roller to achieve desire density, complete

clause as per 401 as per MOST specification etc. complete.

4 Construction of 150 mm thick compacted granular sub base (Grade-IV, 3795.00 Cum 1781.64

Crushed B.T. materials of 26.5mm to 9.5 mm @ 64%, 9.5 mm to 4.75 mm @

11%, 4.75mm to 2.36 mm @ 25%) by providing close graded material,

mixing in a mechanical mix plant at OMC, carriage of a mix material to work

site, spreading uniform layers with motor grader on prepared surface and

compacting with vibratory power roller to achieve desire density , complete

5 Providing and laying wet mix macadam base course 250 mm thick in two 6085.00 Cum 1990.71

layers (125 x 2 layers) as per MORTH specification using machine crushed

B.T. chips as per required gradation, mixing with required optimum quantity

of water, conveying the mix to site of work, spreading in to grade and camber

with paver / mechanical means and consolidation each layer with vibratory

roller to achieve the desired density including cost of material labour plant

and equipment etc. complete.

6 Providing and applying priming coat with emulsion SS-I at the rate of 7.50 kg/ 20400.00 Sq.m. 62.60

10 Sq.mt. including cost of asphalt and preparing the surface heating and

applying etc. complete.

7 Picking of the bituminous surface using JCB excavator or by any mechanical 40493.00 Sq.m. 5.23

means, cleaning and removal of loose and unsuitable material on the road

surface including cost of fuel, oil, lubricant, labour charges and disposal of

loose unsuitable material from site to the disposal site as directed by

Engineer in charge.

8 Providing and laying 75 mm thick compacted B. M. with B.T. aggregate as 10879.90 M.T. 3094.64

per MORT&H specification using emulsion grade RS-1 for coat at

Kg./10 Sq.mt. with mechanical sprayer and bitumen grade VG-30 for mixing

at the rate 34.0 Kg/M.T. i.e. 3.40 % of total mix including heating the

aggregate and asphalt by drum mix plant and spreading the same by paver

finisher and consolidation with vibratory roller including providing all

materials, equipments, tools and plants, oil, kerosene, fire wood, labour

charges etc. complete

9 Providing and laying 25 mm thick compacted Semi Dense Bituminous 3642.00 M.T. 3281.49

Concrete using stone chips as per MORT&H gradation & VG-30 grade

asphalt for mixing @ 5.0% by weight of total mix for binder of bitumen

including heating the aggregate and asphalt by drum mix plant and spreading

the same by paver finisher and consolidation with vibratory roller including

providing all materials, equipments, tools and plants, oil, kerosene, fire wood,

labour charges etc. complete.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

10 Providing and laying asphalt painting on B.T. surface with bitumen VG-30 at 60893.00 Sq.m. 39.27

rate 5.00 Kg / 10.00 Sq.mt. of bitumen including spreading stone dust for

painting surface at rate of 0.03 cu.mt. / 10 sq.mt. with rolling with pneumatic

tyred roller and brushing etc. complete.

11 Providing and laying quarry spall of approved quality including spreading, 4527.00 Cum 1324.11

watering and consolidation with vibratory roller including loading and

unloading etc. complete.

12 Road marking with hot applied thermoplastic paints with reflectorising glass 3761.00 Sq.m. 367.72

beads on bitumen surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide luminance coefficient on

cement road shall be min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The marking should

meet the performance criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years.

13 Supply and apply Rumble Strips Road marking with hot applied thermoplastic 99.00 Sq.m. 2424.00

paints with reflectorising glass beads on bitumen surface providing and laying

a hot applied thermoplastic compound 8 mm thick including reflectorising

glass beads @ 250gms per sqm area, thickness of 8mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes.

14 Supply and fixing Cat eye (Stimsonite) made out of Acrilo beautile sterine 4236.00 No. 375.72

injuction high compressed molding with reflector made of MMC (prismatic

type) size 12 cms x 6 cms x 2.5 cms, provided with bituminous adhesive

g. with each unit for fixing (High Intensity grade)

15 Direction (Junction) Sign :- Providing and fixing sign boards made out of 10.00 No. 21287.50

2mm aluminium sheet / 4mm ACP (Aluminum composite panel) size 244 x

122 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with Micro Prismatic

grade retro reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 50 x 50 x 5mm; painted with best quality epoxy coatings in black

and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block

of size 45 x 45 x 60 cms. for each leg including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

16 Cautionary Warning Sign :- Providing and fixing sign boards made out of 98.00 No. 3906.18

2mm aluminium sheet / 4mm ACP (Aluminum composite panel) size 90 x

x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching, coated with one coat of epoxy primer

and two coats of best quality epoxy paint reflectorised with Micro Prismatic

grade retro reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and

white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block

of size 45 x 45 x 60 cms. for each leg including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty for 7 years

for the retro reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

17 Hazard Marker Sign :- Providing and fixing sign boards made out of 2mm 48.00 No. 3518.68

aluminium sheet / 3mm ACP (Aluminum composite panel) size 90 x 30 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T.

specifications; 1.8mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60 Cms. for each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 7 years for the retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

18 Village Name Sign :- Providing and fixing sign boards made out of 2mm 15.00 No. 6397.43

aluminium sheet / 4mm ACP (Aluminum composite Panel) size 90 x 60 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint, reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T.

Specifications; 3.3mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with best quality epoxy coatings in black and white bends.

The details of symbol or inscription/letters / numerals for each board shall be

as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

years for the retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

19 Facility Informatory Sign :- Providing and fixing sign boards made out of 2mm 9.00 No. 3990.64

aluminium sheet / 4mm ACP (Aluminum composite panel) size 80 x 60 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint, reflectorised with High Intensity Prismatic Grade

retro reflective sheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.

Specifications, 3.6mtr long stand post of Iron angle 75 x 75 x 6mm / 65NB

circular MS Pipe as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm, painted with best quality epoxy coatings in black and

white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 C.C.

block of size 45 x 45 x 60 cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

years for the retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

20 Regulatory / Mandatory Sign :- Providing and fixing sign boards made out of 14.00 No. 3540.12

2mm aluminium sheet / 4mm ACP (Aluminum composite panel) size 60 cms

dia. Circle as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60 cms. for each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for the retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

21 STOP Sign :- Providing and fixing sign boards made out of 2mm aluminium 2.00 No. 6704.36

sheet / 4mm ACP (Aluminum composite panel) size 90 cms. Octagonal as

per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with High Intensity Prismatic Grade retro reflective

sheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T. specifications

3.6mtr long stand post of iron angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron angle of 35 x 35 x

3mm, painted with best quality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms.

for each leg including excavation, curing etc. complete under the supervision

of engineer in charge. A warranty for 7 years for the retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor exposure test

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting.

22 Chevron Sign :- Providing and fixing sign boards made out of 1.5mm 70.00 No. 3711.75

aluminium sheet / 3 mm ACP (Aluminium composite panel) size 60 x 50 cm

as per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality

epoxy paint, reflectorised with Micro Prismatic grade retro reflective sheeting

of Type-4 as per ASTM D-4956 and latest M.O.S.T. specifications, 3.3 mtr.

long stand post of 75 x 75 x6mm / 65 NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with

best quality epoxy coatings in black and white bends. the details symbol or

inscription / numerals for each board shall be per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

cms. for each leg including excavation, curing etc. complete under the

supervision of engineer in charge. A warranty for 7 years for the retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective Sheeting.

23 Metal Beam Crash Barrier:-Type- A, "W" : Metal Beam Crash Barrier 320.00 Rmt. 3496.62

(Providing and erecting a "W" metal beam crash barrier comprising of 3 mm

thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed

on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to

centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments

to be galvanised by hot dip process, all fittings to conform to IS:1367 and

IS:1364, metal beam rail to be fixed on the vertical post with a spacer of

channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811)

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

24 Providing and fixing 5th kilometer stone of precast C.C. 1:2:4 including 6.00 No. 1935.15

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including

painting and lettering etc. complete.

25 Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including 24.00 No. 1290.56

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including

painting and lettering etc. complete.

26 Providing and fixing Hectometer as per I.R.C. type design including painting 122.00 No. 356.50

and lettering etc. complete. (ii) Fixing in C.C. 1:5:10.

27 Dismentaling the existing structure including removing and stacking the 20.00 Cum 886.05

dismentelled materials as and where directed. (A) R.C.C. work.

28 Excavation for foundation upto 1.5 M depth including sorting out and stacking 307.00 Cum 189.30

of useful materials and disposing of the excavated stuff upto all lead for all

29 Providing and filling in foundation with ordinary cement concrete M-150 mix 74.65 Cum 3475.15

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

30 Providing and casting in situ controlled cement concrete M-250 for R.C.C. 233.00 Cum 4946.89

work in piers / abutment and retaining wall as per drawing including

centering, shuttering, scaffolding where necessary laying, vibrating, curing

and finishing complete.

31 Providing and fixing in position I.S.I. mark Fe-500D T.M.T. bar reinforcement 18.64 M.T. 73217.52

including cutting, bending and tying complete as per detailed drawings (A) for

R.C.C. retaining wall.

32 Providing and laying filter media 600 mm thick as directed at the back of 326.00 Sq.m. 1180.33

abutments and returns and wing walls as per detailed specifications.

33 Providing and laying weep hole in abutment and returning by using A.C. / 331.00 No. 82.56

P.V.C. pipes of 100 mm. diameter with laying in proper grade and jointing

etc. complete as per detailed specifications.

34 Excavation for foundation in sand, gravel, clay soft soil & murrum etc. 338.00 Cum 486.67

including shoring, strutting and dewatering as necessary and disposing of the

excavated stuff as directed depth upto 3.0 mt. within all lead and lift.

35 Providing and casting in situ controlled cement concrete M-200 for R.C.C. 88.00 Cum 4268.84

Raft and cut-off walls including necessary shuttering laying, vibrating,

ramming and curing complete.

36 Providing and casting in situ controlled cement concrete M-250 for R.C.C. 116.40 Cum 4374.56

Raft and cut-off walls including necessary shuttering laying, vibrating,

ramming and curing complete.

37 Providing and fixing in position I.S.I. mark steel bar reinforcement of bar 11.50 M.T. 72601.86

grade Fe-500D (T.M.T.) including cutting, bending, hooking and tying

complete as per detailed drawings for raft slab, pier, solid slab, kerb block,

wearing coat etc.

38 Providing and casting in situ controlled cement concrete M-250 for R.C.C. 20.00 Cum 5106.65

solid slab including centering, scaffolding, curing and finishing complete.

39 Providing and filling sand behind abutments and between return in layers as 124.00 Cum 445.41

40 Provision of an Reinforced cement concrete crash barrier at the edges of the 29.00 Rmt. 7199.28

road, approaches to bridge structures and medians, constructed with M-40

grade concrete with Fe-500D reinforcement conforming to IRC:21 and dowel

bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded

asphalt filler board, keyed to the structure on which it is built and installed as

per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-

DO III dated 24 June 1994 as per dimensions in the approved drawing and at

locations directed by the Engineer.

41 Providing and laying pitching on slopes laid over prepared filter media 56.90 Cum 1051.41

including boulder apron laid dry in front of toe of embankment complete as

per drawing and Technical specifications (A) Stone / Boulder.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

42 Providing and laying rubble for apron (each stone weight not less than 40 52.59 Cum 1041.05

kg.) including packing and filling in the interstices with quarry spalls.

43 Earthwork for embankment including breaking clods, dressing with all lead 177.30 Cum 150.39

and lift (excluding watering and consolidation) (C) From Borrow area within

all lead and lift.

44 Providing temporary all weather diversion suitable for double lane traffic 40.00 Rmt. 6294.32

during the construction period of box culvert including providing earthwork for

embankment / cutting as per site requirement, providing RCC pipes of

suitable diameter in required row to drain water, supplying, spreading and

compacting 200 mm thick GSB grade V & 200 mm thick GSB grade III &

mm thick SDBC in 7.0 mt. carriageway with providing all safety measures

including red lamps/ signals at night for traffic and maintaining the diversion

in condition till completion of work etc. complete as directed.

i.e. Rs. Nine Crore Fifty Three lakhs Fourty Five Thousand Nine hundred Sixty Six and Fifty Eight Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. The Contractor will have to submit the required all mix design at his own cost before execution as directed and to be

approved from the Engineer in charge.

6. Credit for Diversion and dismantalled materials of amount of Rs. 1,84,940.96 must be recovered from 1st R.A. bill of

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dist. (R & B) Sub Division, Bharuch (R & B) Division, Bharuch (R & B) Division,

Bharuch Bharuch Bharuch