Tender for Strengthening of existing 22kV x-press feeder from 22KV control pint Pooh to Chango by providing additional poles to shorten the lengthy span re-erection of tilted pole, re-sagging of loose span, re-jumpering etc. under Electrical Sub- Div

Dismentalement Charges of 22kV HT line.

Dismentalement charges of ST poles D/Pole Str. (with complete accessories.)

Dismentalement charges of ST poles S/Pole Str. (with complete accessories.)

De-sagging of ACSR conductor 6/1/3.35mm. (Removal of conductor & De stringing only)

Erection of 22kV H.T Line

Erection of pole.Digging of pit, (ii) Laying of RCC muff (iv) Erection of pole (v) fixing of insulator,X-arm, X-bracing set, (vi) fixing of Barbed wire, Danger plate (vii) filling of pit & Ramming D/Pole str. (Complete in all respect).

Erection of pole.Digging of pit, (ii) Laying of RCC muff (iii) Drilling of holes in X-bracing set, X-arms (iv) Erection of pole (v) fixing of insulator,X-arm, Knee bracing set, Top Clamp (vi) fixing of Barbed wire, Danger plate (vii) filling of pit & Ramming i/c painting of pole S/Pole str. (Complete in all respect).

Re erection/erection of stay set (HT).

Digging of pit, fixing of stay rod, filling of pit, Nozzeling & Tighting.) Complete in all respect.

SAGGING OF ACSR CONDUCTOR 6/1/3.35mm (Single wire).

stringing & sagging, Binding with insulator (only).

Manual Carriage of material considering average distance from road to site of work 0.500 KM

Steel tubular pole 10/11 mtr. long.

Other line material.

MATERIAL TO BE SUPPLIED BY CONTRACTOR (Subject to the non-availability of material at Divisional Store).

Prov. RCC Muffs (2000mm) with concrete filling.

Prov. Cross Arm: [Channel Iron (100x50x6 mm),Length (2800) mm.

Prov. Cross Arm: [Channel Iron (100x50x6 mm),Length (1800) mm.

Prov. 22kV Pin Insulators with GI Pin (Porcelain,36kV, 10KN)

Prov. Disc Insulator Set (including Dead end clamp,Ballcleaves eye sockets, straight stapple & Bend Stapple etc.) Inluding Dead End Clamps etc.)

X-Bracing set MS Angle Iron : (50*50*6) length (2125mm)*2No.

Belt Set-MS Angle Iron:65X65X6, Length: (1800mm)*2Nos.

Prov. stay Wire (7/3.15mm)

Prov. Nuts & bolts. (off soze)

Prov. Aluminium paint.

Prov. Top clamp

Prov. MS Angle Iron (50x50x6mm), Length 2x750

Prov. support clamp

Prov. Egg Insulator.

Prov. Stay Set HT (i/c stay clamp)

Prov. Earthing set HT

Prov. GI wire (8SWG) for earth wire