REPAIR AND MAINT REPLACEMENT AND CLEANING OF WORN OUT SEWAGE LINE DRAINS SOAKAGE WELLS AND MAINT TO FOOTPATH HARDSTANDING OF CR CAMP MT COLONY AND ADJOINING AREAS UNDER AGE BR I AT IMA DEHRADUN

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as directed.

Excavation in trenches not exc 1.5m wide and exc 1.5m and not exc 3.0 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/ loose soil complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 Cm complete all as specified and directed.

Removal of surplus soil to out side the IMA premises and depositing as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repairs complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repairs complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repairs complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repairs complete all as specified and directed.

S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repairs complete all as specified and directed.

S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repairs complete all as specified and directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

S&F Salt -glazed stoneware gully trape square of rounded mouthed size 150x 150 mm fixed in repairs complete all as specified and directed.

S&F Factory made heavy duty precast RCC Manhole confirming to IS 12592 (Part -1 & II ) having clear opening 600mm x 600 mm x 80mm of M-30 Grade of concrete and reinforced with 10mm TMT both ways with MS hook including black painting complete all as specified and directed. Make:- Ferrocon/Sagr tiles/Tulip Infrastructure

S&F Factory made heavy duty precast RCC Manhole confirming to IS 12592 (Part -1 & II ) having clear opening 450mm x 450 mm x 60mm of M-30 Grade of concrete and reinforced with 10mm TMT both ways with MS hook including black painting complete all as specified and directed. Make:- Ferrocon/Sagr tiles/Tulip Infrastructure

S&F Factory made Precast plain / perforated RCC manhole cover size (900x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with MS hook including black painting complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed

M&L for PCC 1:2:4 Type B-0 (using 12.5mm graded crushed stone aggregate) as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L for Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed.

M&L for DWC (Double wall coruggated) HDPE pipes of size 200mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. Note:- Concrete bed shall be measured and paid separately.

M&L for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/ stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. Note:- Concrete bed shall be measured and paid separately. Make:- Astral Ltd. (Brand D-Rex), Prince, Finolex.

S&F Reinforced cement concrete pipes 150mm bore, class NP3 laid on concreate bed or directed all hard ground and jointed complete all as specified and directed. Note:- Concrete bed shall be measured and paid separately.

S&F Salt-glazed stoneware drain pipes grade 'A' 100mm dia laid in trenches and jointed complete all as specified and directed. Note:- Concrete bed shall be measured and paid separately.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 100mm bore of pipe complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar on cement lime mortor and removing rubbbish of out side the IMA premises.

M&L for brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in cement mortar 1:6 complete.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed

Dewatering of septic tank/ soakage well of any depth by pump or by manual after plugging of incoming sewage lines and throwing water into non residential area or in drain/nallah complete all as specified and directed by Engineer-in-Charge.

Cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 1.5 km and burrying in a pit complete all as specified and directed by Engineer-in-Charge.

Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.

Cleaning the manhole depth exc 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.

Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.

Cleaning the sewage line over 150mm dia and upto 250 mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed. Note:(Quated Rates are including with one helper to trade man).

M&L for Construction of soakage well of size 1.20 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including brick work in cement mortar 1:4, plaster where shown on drg shall be 15mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

M&L for Construction of soakage well of size 1.8 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in cement mortar 1:4, plaster where shown on drg shall be 15mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

M&L for Construction of septic tank suitable for 150 users, excavation in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, internal plaster 12 mm thick in cement mortar 1:3 mixed with water proofing compound external and bearing plaster shall be 15mm thick in cement mortar 1:4 , RCC Slab in M-25 design mix concrete including RCC precast manhole cover slab reinforced with 8mm dia bars with angle iron frame , vent shaft and sludge chamber etc complete all as specified and shown in Drg TD-217 sheet 1/7 to 7/7.

Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratinsgs, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item below. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or high authority rep in writing. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to Cleaning of blocked WC seat of pedestal/ squatt pattern floor trap of bath room & kitchen upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (V) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (VI) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removal of demolished material out side the IMA premises complete all as specified and directed.

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed

M&L for Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) by mechanical means complete all as directed.

Prepration of new surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer by mechanical means complete all as specified and directed.

M&L for RCC 1:1½:3 (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

S&F in repairs 15 mm dia angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete. Make:- Jaquar/Cera (Victor series)/Prayag (7000 series)

S&F in repairs 15 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F in repairs 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Make:- Jaquar/Cera (Victor series)/Prayag (7000 series)

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified. Make:- Hindware/Parryware/Cera

S & F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and PVC waste pipe up to floor trap and fixed complete all as specified. Make:- Hindware/ Parryware/Cera

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. Make:- Hindware/Parryware/Cera

S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and stainless steel hinging device and fixed all as specified.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing the demolished material out side the IMA premises complete all as directed.

M&L Glazed ceramic coloured tiles of size 450x300 x 6-7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in tile grout to match laid over and including 10mm thick rendring in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing the demolished material out side the IMA premises complete all as directed.

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Sagr Tiles, Ferrocon

M&L for Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Sagr Tiles, Ferrocon

M&L for Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer except tiles complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Sagr Tiles, Ferrocon

M&L for Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with KMNo4 solution & drying it again with vaccume cleaner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year)

Description all as per serial item No 67 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr

S&F in repairs lid/ cover for PVC over head water tanks 300/500/1000 ltrs capacity (as per sample) complete all as directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing etc complete all as directed.

S&F for 15 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing etc completed all as specified.

S & F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Removing / uprooting, shrubs, trees, vegetation growth & weeds from the RCC Chajja, roof slabs and around PVC tanks etc and cleaning the complet roof with sweep broom making good the damaged / broken portion with cement mortar in cement mortar 1:4 and finishing the surface fair complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor/hard standings and making impressions with spike rolling or expanded metal whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces to make it level including making joints 12mm wide to the full depth of PCC at panel size n, exc 2.0mx 2.0m and filling the same with sealing compound grade 'A' including necessary formwork including demolition of existing old cement concrete floor etc complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

S&F MS galvanised chain link fencing, of size 3mm dia and mesh size 60x60mm or less to any type of standards, rails, straining bolts etc including provision of binding wire and dismantling/Taking down unserviceable fencing complete all as specified and directed.

Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregade ) in foundation for post holes complete all as specified.

Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground in natural ground.

S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works conforming to Fe 290 Gde E- 165 complete all as specified and directed

S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm.

Preparation of new steel surfaces of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Meher enterprises

SAI CONSTRUCTION

M/S PUNDIR BUILDERS