Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | ₹1.4 L | L1 | Accepted-AOC Due of lowest rate |
| 2 | L2₹1.5 LRejected-Finance | ₹1.5 L | L2 | Rejected-Finance Due to highest rate |
| Sl No | Description | Qty | Unit | M/S POLLY PHASE NEW ENGINEERING L1 | ABHAY SINGH L2 |
|---|---|---|---|---|---|
| 1.00 | Transporation of suitable truck/Tractor mounted where only road available , DTH and ODEX / percussion calyx /RC drilling with portable rigs alongwith necessary accessories etc to the site of work and erection of portable rig including levelling of site etc. complete in all respect as per direction of the Engineer-in-charge. | 1 | No. Job | 2,000 ₹2,000 | 2,500 ₹2,500 |
| 2.00 | Drilling bores of 152mm dia as per IS 2800-1979 from ground dia as per IS: 2800-1979 from ground level in the overburden as per directions of the Engineer-in-Charge/Hydrologeologist, with suitable rigs for drilling through rocky formations consisting of sandstone, limestone, dolomites, conglomerate, boulder pebble, gravel silt clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachments complete in all respect. | 48.77 | Rmt. | 1,350 ₹65,839.50 | 1,400 ₹68,278 |
| 3.00 | Supplying and lowering of IS marked I25mm nominal bore, 4.80mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirment of ODEX attachment from approved manufactures complete in all respects as per directions of the Engineer-in-charge. (1 X 60 = 60 Rmt.) | 48.77 | Rmt. | 1,350 ₹65,839.50 | 1,400 ₹68,278 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per direction of the Engineer-in-charge. | 1 | Nos | 3,500 ₹3,500 | 3,600 ₹3,600 |
| 5.00 | Collection and preservation and display of suitable size sample box with top lid and locking arrangement full binding over tube well to the department complete in all respect as per direction of the Engineer-in-charge. | 1 | Nos | 30 ₹30 | 503 ₹503 |
| 6.00 | Development of tube-well /bore well and yield testing with air compressor through V-notch and disinfection etc. as per IS : 2800-1979s complete in all respect as per IS-2800-1979 and as per direction of the Engineer-in-charge. | 8 | Hours | 800 ₹6,400 | 950 ₹7,600 |
Tender Value
₹1.5 L
EMD Value
₹2,982
Closing Date
12 Dec 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
Providing and installation of hand pump at SE awadi near Naag Mandir Gharoh GP Gharoh
2025_HPIPH_122520_1
EE/JSDS/NIT/2025- 7833-82 dated- 03/12/2025
Open Tender
Civil Works
60 days
Shahpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Executive Engineer
₹2,982
5 Feb 2026
3 Dec 2025
12 Dec 2025
3 Dec 2025
12 Dec 2025
3 Dec 2025
3 Dec 2025 - 12 Dec 2025
Transporation of suitable truck/Tractor mounted where only road available , DTH and ODEX / percussion calyx /RC drilling with portable rigs alongwith necessary accessories etc to the site of work and erection of portable rig including levelling of site etc. complete in all respect as per direction of the Engineer-in-charge.
Drilling bores of 152mm dia as per IS 2800-1979 from ground dia as per IS: 2800-1979 from ground level in the overburden as per directions of the Engineer-in-Charge/Hydrologeologist, with suitable rigs for drilling through rocky formations consisting of sandstone, limestone, dolomites, conglomerate, boulder pebble, gravel silt clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachments complete in all respect.
Supplying and lowering of IS marked I25mm nominal bore, 4.80mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirment of ODEX attachment from approved manufactures complete in all respects as per directions of the Engineer-in-charge. (1 X 60 = 60 Rmt.)
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per direction of the Engineer-in-charge.
Collection and preservation and display of suitable size sample box with top lid and locking arrangement full binding over tube well to the department complete in all respect as per direction of the Engineer-in-charge.
Development of tube-well /bore well and yield testing with air compressor through V-notch and disinfection etc. as per IS : 2800-1979s complete in all respect as per IS-2800-1979 and as per direction of the Engineer-in-charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
Form6and8.pdf
Tender Documents • 0.82 MB
Termsandcondition.pdf
Tender Documents • 0.18 MB
BOQ_179763.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid