Widening & Strengthing of Vavdi to Virendragadh Road (NP) Km.0/000 to 7/150 Ta.Dhangadhra, Dist.; Surendranagar

Name of work :- Widening & Strengthing of Vavdi to Virendragadh Road (NP) Km.0/000 to

7/150 Ta.Dhangadhra, Dist.; Surendranagar. (Under MMGSY-Khas Angbhut-2025-26)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 2.39 One 28393.03

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 15715.40 One 184.47

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Box cutting the road surface to proper slope 1208.20 One 104.20

and camber for making a base for road work Cum

including removing the excavated stuff and

depositing on the road side slopes as

directed upto all lead.

4 Earthwork in cutting in all sorts of soil and 4306.70 One 127.74

soft Murrum including conveying and Cum

spreading the suff embankment as and

where directed within 200 meters from the

end of the cutting with all required lead and

5 Scarifying graveled macadam or Bitumen 10521.00 One 39.62

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

6 Granular Sub-base with Black trap crushed 1578.20 One 1038.58

stone well Graded Material (Table.400.1) by Cum

Mix in place Method. Construction of

Granular Sub-base by Providing Black Trap

cruhsed stone well greded material,

spreading in uniform layers with motor

graded on prepared surfce, mixing by mix in

place method with rotavator at OMC, and

compacting with Vibratory roller to achieve

the desired density, complete as per

Technical Specification Clause-401. For

Grading-1 Materials.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

7 WBM Grading-1 736.50 One 1517.92

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

1 as per Technical Specification Clasue.405

By menual means.

8 WBM Grading-2 2718.10 One 1409.54

Providing, laying, spreading and compacting Cum

stone agg. Of 63mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

2 as per Technical Specification Clasue.405

By menual means.

9 Rolling and Watering of earthwork with 18448.10 One 22.48

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

10 Providing and appliying primer coat with 28406.70 One 38.58

bitumen emulsion SS1 on prepared surface Sqm

of granular Base including clearing of road

surface and spraying primer at the rate of

to 1.0kg/sqm using mechanical means,

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

11 Providing and laying bitumenous grout 1979.00 One 2140.79

37.50mm thick using bulk Emulsion RS1 for MT

tack coat at the rate of 2.50kg/10sqm on

Bitumin surfacer and using BT chips for

required gradation with the asphalt of grade

VG-30 at the rate of 1.99% i.e 19.90kg/MT by

weight of mix including heating and mixing

in drum mix plant , transporting the mix and

spreading the same by paver finisher and

consolidation as per MOST specification

including cost of all materials fuel, labours,

tools and plants etc. using contractor's own

drum mix plant etc. complete.

12 Providing, laying and rolling 37.50mm thick 2177.00 One 2756.08

compacted bitumenous Macadam (B.M.) in MT

one layer with B.T. aggregates as specified

and using Emulsion RS1 for tack coat at the

rate of 2.50kg/10sqm (As per IRC-16) and

using bitumen for mixing with agg. at the

rate of 3.40% i.e 34.00kg/MT of total mix

including mixing in Drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary including cost of hire charges,

firewood, oil, lubricants, labour charges, etc.

by using constractor's own Drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of sepcification.

13 Providing and laying and rolling of 20mm 1215.00 One 3302.19

thick Compacted mix seal surface with B.T. MT

and aggregate as spedified using bitumen

for mixing with aggregate at the rate of

5.10% i.e 51.00Kg/MT of total mix including

heating and mixing in drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary firewood, oil, lubricants, labour

charges using contractor's own drum mix

plant, machineries and equipment, tools etc

including flushing of sand 0.27cum/10sqm

etc. complete in accordance with the

requirement of spefication.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

14 Excavation for foundation upto 1.5m depth 258.60 One 241.79

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (B) Dense or hard soil.

15 Excavation for foundation upto 1.5m depth 239.60 One 412.00

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (C) Hard Murrum

16 Providing and casting in situ ordinary 540.20 One 3799.62

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

17 Providing and filling in foundation with 78.30 One 3226.63

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers incl.

Formwork, vibrating, ramming and curing

18 Providing and casting in situ Orndinary 124.10 One 5101.10

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

19 Providing and casting in situ Contolled 35.20 One 5101.10

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

20 Providing and laying weep hole in 96.00 One 53.44

Abutment and returns by using A.C pipe of No

100mm. Incl. fixing in proper grade and

jointing the complete as per detailed

21 Providing and laying in Position FE - 3.390 One 73217.52

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

22 Providing and Fixing in position FE- 1.360 One 72601.86

500/500D TMT bar reinforcement including MT

cutting, bending, hooking, and tying

complete as per detailed drawaing (A)RCC

kerb (B) RCC Footpath (B) RCC Solid Slab/

App. Slab / Wearing coat.

23 Supplying and fixing reinforced concrete 45.00 One 3685.88

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 900mm Dia.

24 Dismantling the existing structure including 112.40 One 886.05

removing and stacking the dismantled Cum

materials as and where directed. RCC Work.

25 Providing and fixing Precast cement concrete 28.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

26 Providing and fixing Precast cement concrete 900.00 One 327.69

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

27 Providing and fixing ordinary Kilometer 7.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

28 Providing and fixing 5th Kilometer stone of 1.00 One 1935.14

pre-cast C.C. 1:2:4 including necessary No

reinforcement as per I.R.C. type design in

C..C. 1:4:8 including painting lettering etc.

29 Providing and fixing Indicator stone of 321.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

30 Providing and fixing Flood guage post mark 6.00 One 1134.23

of 'C' angle size 100mm x 50mm x 6mm thick No

(in head wall 0.500mt. And 1.50mt. Out side

with painting and lettering with redeum

color as directed.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

31 Village/Bump Ahead sign. : Providing and fixing 8.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid etching

coated with one coat of apoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest MOST specification

letter and numbers should be as per IRC:30-1968,

Mt. long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50x50x5mm, painted with

best quality epoxy coating in black and white bends,

the details of symbole on inscription/ numerals for

each board shall be as per the instruction of the

Engineer in charge. The fixing at site shall be in C.C

1:2:4 block of size 45x45x60cms. for each leg including

excavation curring etc. complete under the

supervision of engineer in charge (A) Engineer Grade.

32 Direction sign (Junction board):-Providing and fixing 3.00 One 14831.70

sing boards made out of 2mm aluminium sheet; size No

244 x 122cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision

of engineer in charge.(A) Engineer Grade(VR)...

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

33 Sign Board per square Meter :-Providing and fixing 30.00 One 7615.37

sing boards made out of 2mm aluminium sheet; size 1 No

Meter x 1 Meter as as per the design given by

engineer in charge pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should

be as per IRC-30-1968, 3.1m long (2 nos) stand post

and frame may be fabricated either from suitable size

iron angle of 35 x 35x 3mm & 50 x 50 x 5mm & 75 x

75 x 6mm as required painted with best quality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

34 Cautionary Warning Sign : Providing and fixing sign 6.00 One 3808.65

boards made out of 2mm Aluminium sheet size No

90x90x90 cms. Equilateral treangle as per the design

of IRC-67-1977 pre treated with phospheting process

and acid etching coated with one coat of apoxy primer

and two coats of best quality epoxy paint reflectorised

with retro reflective sheeting as per latest MOST

specification 3.1 Mt. long stand post and frame

fabricated from suitable size iron angle of

35x35x3mm, 75x75x6mm. as required painted with

best quality epoxy coating in black and white bends

the details of symbole for each board shall be as per

the instruction of Engineer in charge the fixing at site

shall be in 1:2:4 CC block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineering Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

35 Citizen's information Board. Providing and fixing of 1.00 One 7325.53

typical MMGSY information board as per instruction. No

Two MS sheets of 3 mm thick, of 900 mm x 750mm

size fixed at top & bottom duly rivetted with MS

angles of 25 x 25 x 5 mm thick M.S angle shall be

welded by two vertical M.S angle of 5 mm thick to

mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of

600mm x 600mm x 750mm, below ground level. The

letters & figure of any shade reflectorised with High

Intensity Prismatic Grade Retro Reflective Sheeting of

Type-4 as per ASTM D-4956 and latest MORD

specifications; All sections of framed posts and steel

tube will be painted with primer and two coats of

epoxy paints as per drawing Clause 1701 and

Annexure 1700.1 (10.16). (A) Class-B High intensity

Grade Retro Reflective sheeting.

36 Road Marking with Hot Applied paints with 1502.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

37 Cate eye / road stud/ RPM : Supplying 794.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Rupees Three Crore Eighteen Lakh(s) Ten Thousand Four Hundred Seventy Seven

And Paise Twelve Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

NOTE: Amount Rs.8986/- Of Dismentalled materials shall be recovered from 1st R.A. bill of Contractor at once.

Signature of Contractor.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division

Dhrangadhara Surendranagar