Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹37.1 L+₹1.9 L (5.53%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹37.5 L+₹2.3 L (6.50%)Rejected-Finance MOTHER TERESA ROAD ZOO TINIALI GUWAHATI 781024 | GUWAHATI | KAMRUP METRO | ASSAM | 781024 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹37.7 L+₹2.6 L (7.28%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹37.7 L+₹2.6 L (7.32%)Rejected-Finance KALIBARI BAZAR TUPKHANA PART I PO ARUNACHAL P S SILCHAR DISTT CACHAR ASSAM 788 025 | SILCHAR | CACHAR | ASSAM | 788025 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR, MASIMPUR, ASSAM 788025
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT MASIMPUR MILITARY STATION UNDER GE SILCHAR
2023_MES_604018_1
8794/E8
Open Tender
Civil Works
Item Rate
180 days
MASIMPUR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SILCHAR
₹71,000
Yes
12 Aug 2023
17 Jun 2023
12 Jul 2023
17 Jun 2023
10 Jul 2023
3 Jul 2023
24 Jun 2023 - 28 Jun 2023
Amount
EXCAVATION & EARTHWORK
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
Surface dressing not exceeding 15cm deep and getting out in soft/loose soil complete all as specified and as directed
B/R WORKS
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulb, insulation, etc.) or insulation boards slabs/blankets of any thickness including cover fillets complete all as specified and as directed
Dismantling wooden boarding (eaves board, rafter, etc.) of any description fixed in any position with nails complete all as specified and as directed
Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed
Dismantling of timber fillets rails, posts, rafters, purlins, etc. under 40sqcm in section, in any position in unframed works complete all as specified and as directed
Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each but with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces
M&L for framed works as in doors or gates of angle or other sections side hung with pintle hinges, stops, hand made sliding monkey tail bolts, etc. conforming to Fe 290 (grade E-165) complete all as specified and as directed
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 11 to 15mm complete all as specified and as directed
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm in length, dia of neck & shank 11 to 15mm complete all as specified and as directed
S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W grade-E -250, quality 'B' complete all as specified and as directed
S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-210 complete all as specified and as directed
S&F rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe 410W grade-E -250 complete all as specified and as directed
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) in coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, etc. including all necessary formwork complete all as specified and as directed
M&L for 100mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in floors, sub-bases, pavings, etc. surface finished rough complete all as specified and as directed
M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in surface channels, drains, etc. complete all as specified and as directed
M&L for 40mm thick plain cement concrete 1:2:4 type B2 (using 20mm graded stone aggregates) as in floors finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous mix of 1 part bitumen and 3 part of sand complete all as specified and as directed
M&L for fine dry river sand bedding under floors, pavings, etc. then punning down to its consolidated thickness, 50mm thick complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
M&L for laying pre-polished 80mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 350kg/sqcm conforming to IS: 15658-2006, pointed in grey cement complete all as specified and as directed
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed Note: Inner girth shall only be measured
Add or deduct for each 25mm girth or part thereof over or under 30cm in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed
M&L rendering 10mm thick, in cement mortar (1:6) on walls / concrete surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed
M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein
Supply only integral water proofing compound all as specified
S&F single leaf door of size 0.98 x 2.10m including frames by providing and fixing GI shutter (thickness 45mm) door, with 0.8mm thick GI sheet with spary painting, hutter width of 45mm duly sealed and PUF insulated with 40kg/sqm density all as per manufacturer's drawing complete all as specified, laid herein below and as directed Specifications (a) Frame profile - 100x50mm with 1.2mm thick GI sheet with spary painting (b) 2mm thick lead sheet embedded in the door leaf & door frame completely Accessories for door (a) 1No. standard arm door closer & tower bolt (b) Stainless steel 'D' type handles on pull side 1 pair per leaf (c) 4Nos. stainless steel ball bearing hinges 114x101x3.5mm per leaf (d) One side key operated suitable locking arrangements
M&L for 2nd class hard wood timber scantling clean sawn in section, timber unframed & fixed complete all as specified and as directed
M&L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails exceeding 13sqcm and not exceeding 25sqcm in section complete all as specified and as directed
M&L for 2nd class hardwood fillets square, rectangular or triangular in section clean sawn screwed with nails exceeding 6sqcm and not exceeding 13sqcm in section complete all as specified and as directed
S&F 2nd class hardwood in boarding 50mm thick, clean swan with butt joints and fixed with nails fixed in any location / position with nails complete all as specified and as directed
M&L for dismantling and refixing 2nd class hardwood boarding 20mm thick wraught with butt joints fixed in any location / position with new nails complete all as specified and as directed.
M&L 25mm block board, grade 2 quality, interior grade, commercial type fixed with screws to MS framework at any location / position complete all as specified and as directed
S&F solid PVC wall lining consisting of 5mm thick plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as shown on drawing complete all as specified and as directed
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and as shown on drawing complete all as specified and as directed
S&F 100mm long butt hinges, extruded aluminium alloy with stainless steel hinge pin, anodised (ISI marked) fixed with stainless steel screws complete all as specified and as directed
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
M&L for preparation of new masonry / concrete wall surfaces and applying three coats of white wash including all necessary staging, etc. as required complete all as specified and as directed
M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed
M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600x600mm with main runner 38x24mm and wall angle 24x24mm using 4mm thick high pressure non-asbestos fiber cement decorative board (E-Board Classic) in grid of GI system duly suspended from 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from roof with adjustment clips, providing positions for light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detectors, etc., cnforming to IS 14862, the main runners duly secured to structural soffits by hanger @1220mm c/c (maximum) with the last hanger at the end of each main runner not interlocked between main runners @610mm c/c so as to form 600x600mm grid complete all as specified and as directed
M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in skirting, dado, etc. laid against 10mm thick backing coat in CM (1:4) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
M&L for vitrified tiles, coloured, 10mm thick, joint free, edge cut, area of each tile exceeding 0.18sqm but not exceeding 0.36sqm, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in CM (1:6) (rate shall be included) complete all as specified and as directed
E/M WORKS
M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
Supply and laying burnt bricks of sub-class 'B' designation 75 of size 230x115x75mm laid in trenches for cable protection complete all as specified and as directed
S&F steel water tubing, light grade, 25mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. complete all as specified and as directed
Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed
M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:
One light point controlled by one 5A one way switch
One ceiling fan / exhaust fan point controlled by one 5A one way switch
One switch socket outlet 3 pin 5A controlled by one switch on independent board
One switch socket outlet 3 pin 5A controlled by one switch on same board
M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:
One light point controlled by one 5A one way switch
One ceiling fan / exhaust fan point controlled by one 5A one way switch
One switch socket outlet 3 pin 5A controlled by one switch on independent board
One switch socket outlet 3 pin 5A controlled by one switch on same board
One bell buzzer controlled by one bell push
M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed
M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC casing caping not less than 20mm dia and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed
M&L for point wiring with 4sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for AC / equipment controlled by one SP/SPN MCB independent, wiring from DB to swicth socket running independently with 3 wires for each point without tapping complete all as specified and as directed
M&L for point wiring with 4sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC casing caping not less than 20mm dia and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for AC / equipment controlled by one SP/SPN MCB independent, wiring from DB to swicth socket running independently with 3 wires for each point without tapping complete all as specified and as directed
S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed
S&F switch piano flush modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed
S&F socket outlet, 2/3 pin, 6A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed
S&F socket combination outlet, 6 pin, 16A modular type, ISI marked, 3 module, 230V complete all as specified and as directed
S&F electronic fan regulator, modular type, stepped type (5 steps), 120W, 230V, ISI marked duly connected up complete all as specified and as directed
S&F bell push modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed
S&F modular white cover plate with frame ISI marked complete all as specified and as directed suitable of the following modules:
2 modules
3 modules
4 modules
8 modules
S&F modular cat 6A RJ 45 socket interface complete all as specified and as directed
S&F RJ45 cat-5e network ethernet patch/LAN cable unshielded twisted pair complete all as specified and as directed
S&F switch piano flush button type, single pole, ISI marked, one way 5A, 240V complete all as specified and as directed
S&F bell buzzer, ding dong type, 230V, single pole, 50Hz, AC complete all as specified and as directed
S&F PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed
S&F 600x600mm LED type down lighter 36W with drivers connecting accessories and provision of fixing arrangements in false ceiling and connecting up including taking down and disposing off old fitting complete all as specified and as directed
S&F wall mounted, compact LED batten type light fitting 20W having 30mins backup (working as regular 20W in normal mode and 4W in backup mode) and connecting with three core flexible copper conductor cable of suitable size from ceiling rose iincluding taking down and disposing off old fitting complete all as specified and as directed
S&F red & green coloured LED bulbs 0.5W (set of two), 5 star rated and connecting to lamp holder complete all as specified and as directed
S&F LED bulb 10W, 5 star rated and connecting to lamp holder complete all as specified and as directed
S&F decorative wall light fixtures made up of polycarbonate suitable for 10W LED bulb (spiral B-22 base) including 10W LED lamp and all fixing arrangements and connecting up including taking down and disposing off old fitting complete all as specified and as directed
S&F building security light, LED luminaire 25W IP-66 protection class, with 25W LED lamp, driver, etc. with all accessories including taking down and disposing off old fitting complete all as specified and as directed
S&F LED light fitting, mirror type with high output diffuser 2 feet, 10W, 220V AC decorative type with driver holder and LED lamp and connecting up with three core flexible copper conductor cable of suitable size including taking down and disposing off old fitting complete all as specified and as directed
M&L for taking down carefully ceiling fan of any type from existing location and cleaning entirely with suitable cleansers, servicing, spray painting with synthetic enamel paint (of approved tint) including filling of cavities with filler, oiling moving parts, writing MES No. in Roman block letters & figures (of approved size) and refixing in existing / new location with provn of ‘S’ type fan hook including connecting electrically with new cable complete all as specified and as directed
S&F BLDC ceiling fan 1200mm sweep, 230V, minimum air delivery 210CFM with service value 6.00 BEE 5 star rated, with blades, down rods and accessories including disconnecting, taking down of old unserviceable fan and depositing to MES storeyard including all loading, unloading, carting, etc. complete all as specified and as directed
S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient BEE five star rated exhaust fan, 250mm sweep, 230V, 50Hz, 1200RPM, copper wound, with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts including taking down old / unserviceable fan any type complete all as specified and as directed
S&F heavy duty, steel body with steel blades, legs, ISI marked energy efficient BEE five star rated, 230V, 50Hz, 1200RPM, exhaust fan, 300mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts and making good the disturbed areas and surfaces complete all as specified and as directed
S&F steel water tubing, light grade, 25mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. including taking off old unserviceable tubing and disposing off complete all as specified and as directed
S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed
S&F sheet metal enclosures for 4 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed
S&F sheet metal enclosures for 4 way MCB DB, 240V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed
S&F sheet metal enclosures for 4 way MCB DB, 240V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed
S&F metal clad socket outlet with single pole enclosure with 5 pin and earth plug socket including 1No. MCB SP 20A 10kA 240V with neutral and earth point and taking down and disposing off old/unserviceable socket complete all as specified and as directed
S&F metal clad socket outlet with single pole enclosure with 5 pin and earth plug socket including 1No. MCB SP 20A 10kA 240V with neutral and earth point complete all as specified and as directed
Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 4 core 16sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles complete all as specified and as directed
Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 4 core 25sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles including taking off old unserviceable cable and disposing off complete all as specified and as directed
Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 4 core 25sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles complete all as specified and as directed
S&F electronic meter tamper proof LCD display with polycarbonate cover, three phase, 415V, 10-60A, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and kWH duly fixed in suitable MS box with locks complete all as specified and as directed Notes: (i) Energy meter shall be of makes as stipulated hereinafter (ii) Meters shall be tested for performance as per relevant IS
Taking down old unserviceable submain wiring of any type, any size, from any location or position and disposing off including making good the disturbed surfaces, etc. complete all as specified and as directed
M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC casing capping 20mm wide, heavy duty, ISI marked surface on wall/ceiling /roof, etc. with all required accessories complete all as specified and as directed Notes: (i) 2 runs of 6sqmm main cable, 1 run of earth conductors and 1 run of PVC casing/capping shall be measured as one length (ii) Separate casing shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of casing shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site
S&F in repairs MCB SP, 240V, 5 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed
S&F MCB SP, 240V, 5 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed
S&F in repairs MCB SPN, 240V, 40 to 63A, 10kA, 50Hz, C curve complete all as specified and as directed
S&F in repairs MCB TPN, 240V, 63A, 10kA, 50Hz, B curve complete all as specified and as directed
S&F MCB TPN, 240V, 63A, 10kA, 50Hz, B curve complete all as specified and as directed
Dismantling old unserviceable earthing from any position / location and disposing off complete all as specified and as directed
M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications complete all as specified and as directed
Notes for serial item No. 116: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge
NAGALAND AGENCIES CO
M/S LUIT CONSTRUCTION
Anup Kumar Paul Choudhury
M/S SANJIB DEB
MS AFTAB LASKAR
m/s builders and suppliers
P K ROY & SONS
M/S M P Sharma
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .