SPECIAL REPAIR TO BLDG NO EW 70 IN SOUTH COMPLEX AT IMA DEHRADUN

Amount

M&L for glazed vitrified tiles of any shade 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exec .42 Sqm, laid in floors etc. set and jointed in neat cement slurry and pointed with tile epoxy grout white or coloured to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete and demolition of existing floor and rubbish off the IMA premises complete all as directed.

M&L for glazed vitrified tiles of any shade 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exec .42 Sqm, fixed on vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed with tile epoxy grout white or coloured to match the shade of tiles with and including 10 mm thick rendering in cement mortar 1:4 complete and dismantling of existing skirting including backing and rubbish off the IMA premises complete all as directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

M&L for dismantling existing E-boards from ceiling, straightening the sagged/defective grid, hanging properly with 1.6mm dia GI wire suspenders and refixing E board all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

S&F Powder coated aluminium anodised door with frame and shutter and glazing 5mm thick glass and 12mm thick prelaminted particle board exterior grade in bottom panel (kit ply, novapan) glass fixed with rubber gasket with aluminium glazing clips, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm glass thickness with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stopper cleat - 02 Nos complete all as specified and directed.

S&F Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed.

S&F 4.8mm thick glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed.

M&L for 12 mm Non asbestos fibre cement,fire Resistance building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. Make:- century Ply, Everest,Diamond.

M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair in aluminium doors complete all as specified & directed.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete as specified.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L for Rendering 15 mm thick on brick or concrete surface with ready mix plaster surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450X 300X 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in epoxy tile grout coloured to match with shade of tile color and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

M&L for Non skid glazed vitrified tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in epoxy tile grout white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete including all as directed.

M&L for Granite stone of any colour (of any type) 18-20 mm thick machine cut (table rubbed,proper moulded & polished), as in floors, cooking platforms,sill of window and like bedded with and including 20 mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone complete all as directed icluding moulding to exposed edges.

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. Color as approved by GE.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid Moulded flush door shutter both side laminated of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for cabinet Shutter/ partitions/drawer Front, cup board shutters, frame etc as complete all as directed by Engineer-in-Charge. Color as approved by GE.

S&F Continuous (piano) hinges, stainless steel, bright finish or electro galvanised of flaps (When open) in 30mm.

S&F, Aluminium Powder coated three track sliding windowwith two or more shutter with 5mm thick plain glass one shutter of stainless steel mosquito proofing with good quality bearing, handle lock etc, rubber gasket and glazing clips etc using following sections as given in JINDAL catelogue.(a) Bottom rail sec no. 20620. (b) Top & verticle rails sec no. 20621,(c) Handle sec no.20606. (d) Inter lock sec no. 20724 (e) Top & bottom & sides sec no.20844 including PVC track, lock, U chanel and L alm angle cleats etc complete all as specified and directed. .

S&F for decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, built in cement mortar or cement lime mortar etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks removing surplus serviceable bricks, hard-core,etc. to store and rubbish not exc. 50m

Forming jambs cement mortar 1:4 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

Making good under cills or over arches in cement mortar 1:4, lintels and bressummers including all pinning when necessary

S&F Stainless steel of SS-304 Grade drapery rod 25 mm dia with supporting brackets all as directed and approved fixed in repair complete all as directed.

S&F Stainless steel decorative finale suitable for 25mm dia stainless steel drapery rod all as directed and approved fixed in repair complete all as specified & directed.

S&F stainless steel 100 mm size butt hinges fixed with SS screws of suitable size complete all as specified and directed .

S&F 150mm long aluminium anodized handle cast complete all as directed.

S&F Stainless steel handles fancy type 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F looking mirror of 5mm thick size n exec 1.5 Sqm rectagular fancy type having bevelled boarders of glass fixed to walls with stud pins complete all as specified by engineer in charge.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as directed.

S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

S &F TMT MS bar 6mm dia & over up to 10mmdia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups as specified .

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down existing steel tubing pipe complete all as directed. Make:- Prince, Supreme, Prayag,Astral.

Supply and Fixing,16mm Brass thread Elbow complete all as specified & directed. Make:- Prince, Supreme, Prayag.

Supply and Fixing, Brass Thread Tee complete all as specified & directed. Make:- Prince, Supreme, Prayag,Astral.

Supply and Fixing, Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified & directed. Make:- Prince, Supreme, Prayag,Astral.

Supply and Fixing, Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified & directed. Make:- Prince, Supreme, Prayag,Astral.

S&F Chromium plated Angle valve 15mm dia (angle cock) complete all as directed. Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F 15mm dia Swan Neck pillar cock Super Delux with Aerator complete all as directed. Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F Two way chromium plated angle cock 15mm dia with wall flange complete all as directed Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F 15mm bore long body bib tap with wall flange complete all as directed. Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F 15mm bore stainless steel Health faucet with 1.00meter SS tube complete all as directed. Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F Brass chromium plated towel rail 600mm size complete all as directed. Make: Make: Cera(Brooklyn,Valentina,Ruby)/Kerovit(hydrus,edge,trendy/Jaquar(continental prime,opalprime,florentine)

S&F cascade pattern vitreous china wash down water closet pan (pedestal pattern) one piece, white including plastic water closet seat cover,with dual flush cistern, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. Make:-Cera/Parryware/Jaquar

S&F PVC connections 15mm size with PTMT length 600mm

S&F Table top WHB Star white oval type fixed in repair complete all as directed. Make:-Cera/Parryware/Jaquar

M&L in repair for Urinals star white color size of 375 x 390 x 590 mm snow white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed by Engr-in-Charge.

S&F Chromium Plated brass soap dish complete all as directed. Make:-Cera, Jaquar, Kohler

S&F 100mm dia chromium plated grating with/without hole fixed complete all as directed. Make:- Cera, Prayag, Shakti.

S&F 110mm bore PVC(SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 75mm bore PVC(SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 75mm bore PVC(SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall..

S&F 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

M&L for PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement.

S&F 75mm bore PVC(SWR) branch piece, single (single Y) equal or unequal.

S&F 110mm bore PVC(SWR) branch piece, single (single Y) equal or unequal with access door.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 75mm bore PVC (SWR) bends any radius.

S&F 40mm dia bottle trap of PTMT having minimum water seal of 25mm. (Min weight 270gms)

S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F frosted toughened glass urinal partitions size 400mmx1000mmx6mm thick fixed with SS U clip, screw & other hardware complete all as specified & directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complte all as specified and directed. Make:- Rajshree, Ecocell, Black Cobra.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Make:- Rajshree, Ecocell, Black Cobra.

S&F, 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old unserviceable 500 litre capacity water tank & removing to where directed complete all as specified and as directed.

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make: Prayag, Shakti, Polytuff.

S&F 20mm bore gun metal gate valves, with on off leaver/ iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar

MS Framed work Fe-290 (Gde E?165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Mild steel, plain, black sheet in 3mm thick wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally cleaning with sand paper all as directed by Engr-in-Charge. Note : The work will be carried out upto double storied building and the rate of scaffolding is included for this item also.

M&L for complete removal of existing treatment from wall/ plastered surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Note : The work will be carried out by mechanical means & upto double storied building and the rate of scaffolding is included for this item also.

M&L for preparation of newly plastered or scrapped surfaces of wall(Internal & External) and applying 2mm thick in two coats acrylic damp proof wall care putty by mechanical means as per manufacturers instruction complete all as specified & directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger)/ Nerolac over a priming coat on wall, chajjas, facia etc complete all as directed. Note : 1.The work will be carried out upto double storied building and the rate of scaffolding is included for this item also. 2. Applying coat after completion of surface as above and stage has to be passed by Engr-in-charge before laying another coat.3.The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L two coat of Oil bound distemper over a coat of primer any tint on walls complete all as specified and directed by Engr-in-Charge. (Note : Applying coat after completion of surface as above and stage has to be passed by Engr-in-charge before laying coat complete all as specified and directed.) Emulsion distemper to be applied from company approved applicator.Note:- 1. work to be carried out upto 15m height and rates are inclusive of scafolding. 2:-The distemper work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

Surface excavation n. Exc 30 Cm deep and averaging 15 cm deep and getting out in any type of soil.

Excavation in post holes (or similar holes) each n. Exc 0.5Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 Cm complete all as specified and directed.

M&L for PCC 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate ) in foundation for post holes.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails, column and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165, complete all as specified and directed

S&F MS Plates (plain or chequered), square cut or notched (ordinary and countersunk) forming holes with riveted, bolted or welded attachment Fe-290 Gde E-165.

S&F MS angle/Tee/Hollow tubular section as in column, main or cross beams, hip and jack rafter, purlins where connected to common rafters and etc conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa AND 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed .

M&L for broken stone hard core of gauge 63mm deposited, spread and levelled in layer n. Exc 15 Cm thick watered & rammed to a true surface.

M&L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone agg) as in floor and finished top surface even & smooth with using extra cement and spike rolling to surface or making impression of expanded metal complete all as specified & directed.

M&L for heavy duty parking tiles 40 cm X 40 cm X 10-11 mm thick, set , jointed and pointed in neat cement surry in floors with pigments complete all as specified and directed

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrogated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

M&L for treatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc not exceeding 10 Sqm on plan and in any type of soil etc complete all as specified and directed.

Returning and filling in incl, spreading, levelling watering and well ramming in layers n.exc 25 cm

Removing excavated material out side IMA premises and depositing where directed at a level n.exc 1.5 m above the starting point

M&L for Polished heavy duty chequered cement concrete coloured tiles 30 cm X 30 cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in cement mortar 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

Providing and laying 80mm thick factory made shot blasted chamfered edge Pre-cast cement concrete black color interpaver paver block of M-40 grade confirming to IS 15658-2021,using stone marble chips in top surface upto 15mm in different design and pattern,size and shape made by vibratory method using rubble mould with strong vibratory compaction and sand/shot blasting of top surface of paver block to get uniform rough surface for non slippery flooring.(Size- 200 x 200x 80mm) and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand etc complete, all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), complete. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

Construction of soakage well of size 1.8 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in CM 1:4, plaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

M&L for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/ stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.Make:- Prince, Supreme, Prayag,Astral.

S&F 80mm thick Heavy duty Factory made Precast RCC M-30 as in drain cover slab reinforcement with 10mm TMT bars and providing black painted set and jointed in Cement mortar 1:4 complete all as directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

M&L for Modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting not less than 25 mm dia and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following.Make of wire:- Havells, Anchor, Grandlay, SCI Make of conduit :- AKG, Bhagwati Plastic, Finolex.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one bell push switch.

All as per item No.110 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way 6A, 1 Module.Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp.Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply and fix modular bell push 6A, 1 Module.Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply and fix modular socket 6A, 2/3 pin combined 2 Module.Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module.Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply and fix modular fan regulators step type 2 module 120W .Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

Supply & fix Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed.Make: Anchor/Crabtree/Ess Ess Kay

S&F door bell, AC, 240 volts, single pole complete all as specified by Engineer-In-Charge..

S & F sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make of wire:- Havells, Anchor, Grandlay, SCI.

2 x 10 + 1 x 10 Sqmm

2 x 6 + 1 x 6 Sqmm

S & F Surface and wall mounted LED batten fitting 20 Watt 230 volts AC, not less than 125 lumens / watt, cool white/warm white depending upon requirement, extruded Aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete.Make: Crompton Cat pt no. BRIGHT LINEA CCS-100-20-65-HL2-DP-NWH or equivalent in Havells/Philips

Supply and fix BLDC ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor suiatable for PCB complete all as specified and directed. Make:- Crompton,Atomberg, Havells.

Supply and fix steel body exhaust fan 300 mm sweep, 230 volts 50 Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc including taking down old unsv serviceable exhaust fan and deposited to the store complete all as specified and directed. Make:- Crompton,Orient, Havells.

S&F Water heater storage type,electric,capacity 25 litres 4 star BEE rating high grade stainless steel tank, powder coated metal body, tank designed to withstand 6 bar pressure complete all as specified and directed. Make:- Crompton,Bajaj, Havells(Adonia series).

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I (2009) all as specified and directed.(one earthing for each main Panel )

S&F Sheet metal enclosure, Single pole and neutral with three pin and earth plug and socket with and including one SPN MCB 20 Amps, 240 volts,10 KA complete fixed in repair all as directed. Make:- Havells, Indo Asian, HPL.

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Make:- Havells, Indo Asian, HPL.

SPN, 240 volts 12 ways.

S & F MCB SP/SPN complying to IS/IEC 60898, 240 volts 'B'' Curve 10 KA with energy limiting class 3. The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. Make: Indoasian Cat pt no.810000/01/02/03/04/05/07/08/16/17 for MCB SP/SPN & or equivalent in Havells, HPL.

MCB SP 240 volts, 50 Hz capacity 6-32 Amps

MCB SP 240 volts, 50 Hz capacity 50/63 Amps

MCB SPN 240 volts, 50 Hz capacity 50/ 63 Amps

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB, protection,415 volt ,suitable for fixing MCCB as incomer and SP MCBs or TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity and making good the distrubed surface complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule)

6 Way VTPN DB (FP MCCB + 18 MCB). Make :Indoasian Cat No. 810535 equivalent in Havells, HPL.

S & F MCCB ,4 pole 160 Amps ICS=100% ICU at 415 volts with rupturing capacity 36 KA with thermal-magnetic release and adjustable overload setting complete all as directed. Make:- Havells, Indo Asian, HPL

Supply and fix concealed in wall Rigid non metalic PVC conduit of 40 mm dia, inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks all as specified and directed. Make of conduit: AKG, Bhagwati Plastic, Finolex. Note : The rate for cutting and chasing of wall/floor to flush the conduit and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface shall deemed to be included in the quoted rate .

Supply and Fixing LED street Light fitting 25 Watt made of pressure die cast aluminium housing with toughened glas and high power,IP 66 protection with complete fixing arrangements including providing arrangement of GI pipe of suitable dia for mounting the light all as directed. Make: Havells Cat pt no ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in philips/crompton

Supply and Fixing LED 2x2 Recess 36 Watt (greater than 100 lm/W) fittings, white powder coated CRCA sheet metal body, availability of cool white/neutral white as per requirement,IP 20, including connecting the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv recess mounted fitting complete all as directed. Make: - Crompton Cat pt no. POLARIS NIO I-II LCTLRNE-36-FO-CDL or equivalent in philips/havells

Supply and Fixing LED 2x2 surface 36 Watt fittings, white powder coated CRCA sheet metal body, availability of cool white/neutral white as per requirement,IP 20, including connecting the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv recess mounted fitting complete all as directed. Make: - Crompton Cat pt no. POLARIS NIO III LCTLSNE-36-FO-CDL or equivalent in philips/havells

S&F wall mounted fan 300 mm sweep rust proof body with 100% copper motor, built-in thermal overload protector, air delivery 90 cmm complete all as specified and diected by Engr-In-Charge.Make: Bajaj Neo Spectrum Grey wall fan 300 mm 250892 code or equivalent in havells/crompton

Supplying, Laying, testing and commissioning of XLPE insulated,IS 7098 (Part-I)-1988 marked screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100V grade cross section area 95 sqmm 4 core laid in trenches/fixed on pole/wall / passed through pipe including making necessary connection, with busbar/MCCB/DB's & testing complete, all as specified and directed by Engineer-in-Charge. Make:- Havells, Grandlay, Polycab.

Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed. Notes : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations.

Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed.

M&L for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed .

Supplying, laying & jointing GI water tubing, 50 mm bore, medium grade as in sleeving etc laid in trenches/fixed to walls etc. complete all as specified and directed by Engineer-in-Charge.

S & F MCCB ,3 pole 200 Amps ICS=100% ICU at 415 volts with rupturing capacity 36 KA with thermal-magnetic release and adjustable overload setting complete all as directed. Make:- Havells, Indo Asian, HPL.

sath sahib associates

M/S S P BUILDERS

M/S VIJAY TRADERS

GARGA CONTRACTOR