Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | Anandan K L2 | SASI T L1 |
|---|---|---|---|---|---|
| 1.00Electrification | |||||
| 1.00 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 10 | sqm | 2,000 ₹20,000 Lowest | 2,393.26 ₹23,932.6 |
| 1.00 | 90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | 0.2 | sqm | 4,401 ₹880.2 | 4,114.6 ₹822.92 Lowest |
| 1.00 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet | 24 | metre | 2 ₹48 Lowest | 43.92 ₹1,054.08 |
| 1.00 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 12 | kg | 10 ₹120 Lowest | 159.14 ₹1,909.68 |
| 1.00 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. | 400 | Cum cm | 6 ₹2,400 Lowest | 6.22 ₹2,488 |
| 1.01 | 90.14.7:Supply and providing copper earth bus in the panel board | 200 | Cum cm | 6 ₹1,200 | 5.9 ₹1,180 Lowest |
| 1.01 | 2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N | 5 | each | 2,275 ₹11,375 | 2,127.69 ₹10,638.45 Lowest |
| 1.01 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N | 1 | each | 3,325 ₹3,325 | 3,109.04 ₹3,109.04 Lowest |
| 1.01 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
Double pole | 4 | each | 693 ₹2,772 | 648.59 ₹2,594.36 Lowest |
Tender Value
₹5.9 L
EMD Value
₹14,666
Closing Date
26 Sept 2026, 6:00 pmClosed
Mithun Kurian
Office of the Assistant Engineer LID EW Section Maniyur Grama Panchayat
Project No 236/26 Maintenance works to various Drinking water projects Electrification
2026_LSGD_869762_12
02/ETENDER/2026-2027/LID EW/MNR
Open Tender
Electrical Works
Item Rate
180 days
MANIYUR GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,295
Yes
₹14,666
Yes
28 Sept 2026
16 Sept 2026
28 Sept 2026
16 Sept 2026
26 Sept 2026
16 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electrification | |||||
| 1.001 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 10 | sqm | - | - |
| 1.002 | 90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | 0.2 | sqm | - | - |
| 1.003 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet | 24 | metre | - | - |
| 1.004 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 12 | kg | - | - |
| 1.005 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. | 400 | Cum cm | - | - |
| 1.006 | 90.14.7:Supply and providing copper earth bus in the panel board | 200 | Cum cm | - | - |
| 1.007 | 2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N | 5 | each | - | - |
| 1.008 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N | 1 | each | - | - |
| 1.009 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
Double pole | 4 | each | - | - |
stage.html
html • 0.02 MB
finance_1474373.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.24 MB
BOQ_1474373.xls
BOQ • 0.34 MB
PA.pdf
Tender Documents • 0.25 MB
SBD.pdf
Tender Documents • 0.91 MB
affidavit.pdf
Tender Documents • 0.23 MB
FT.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .