UT08552 MRL13-Soafkhal Rasiya Mahadev to Bandarkot MR

Amount

Earth work in Hill Road (Hill Side Cutting):- Excavation in Hilly area for construction of road in all types of soils, rocks and E&B etc. as met at site true to lines as per plan, L section Cross Slope, super elevation as required also including uprooting & cutting of bushes, dressing of road surface to the required level and slopes with all lifts & leads required for safe disposal of surplus excavated material at suitable dumping places indicated in Drawing by mechanical means/ manual means and including construction of required coolie walling for retaining and muck, without otherwise damaging Forest, Forest Land, Utilities, Private and Public Properties, including slip clearance till the completion of the work as directed by Engineer-in-charge as per Technical Specification Clause 1601, 1602 & 1603 of MORD Specification for Rural Roads 2014. (Km 0.000 to Km 12.034)

Removal of Unsuitable Soil with Disposal upto 1000 m Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 of MORD Specification for Rural Roads 2014

Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side complete as directed by the Engineer-in-charge.

Excavation in Cutting in Soil by manual means with lead upto 50 m - Excavation for roadway in soil using manual means for carrying of cut earth to embankment (Half Cut and half fill) with a lift upto 1.5 m as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014. For Making Super Elevation

Construction of Embankment with Material Obtained from Roadway Cutting - Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of MORD Specification for Rural Roads 2014.

Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014 (For R/W ,B/W ,WIRE CRATE ,PLum masonary ,Gabions )

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material, labour, T&P, royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Hand Packed Stone filling in back of Structure including supply of all materials, labour, T&P and royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and Technical Specifications Clauses 614, 709, 1204.3.7 of MORD Specification for Rural Roads 2014.

Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014.

Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work.(As per PWD Uttarakhand specifications)

Providing and laying of mechanically woven double twisted hexagonal shaped gabion (zinc plus PVC coated) of size 3mx3mx1m with two diaphgrams at 1m interval having mesh wire diameter 2.7/3.7mm, edge/selvedge wire diameter 3.4/4.4mm and lacing wire diameter 2.2/3.2 mm(the work includes filling boulders in the gabions)

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014.(PCC M10)

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - Nominal mix (1:2:4) (For Parapet)

Plastering with cement mortar (1:4), 15 mm thick on stonework in substructure as per Technical Specifications Clauses 613.4 & 1204 of MORD Specification for Rural Roads 2014.

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning, scraping etc. as per Technical Specifications Clause 1915 of MORD Specification for Rural Roads 2014.(For Parapet)

Providing edge stones of 600x120x120 mm Precast in P.C.C. M10 grade on valley side of formation as per drawing and Technical Specification Clause 1608.2.6 of MORD Specification for Rural Roads 2014.

Maintenance of drains include erosion, repair, clearing, reshaping regarding deepening of side drains as well as catch water drains as per technical specification Clause 1907

Excavation in foundation for Structure in all type of soil & rock including all lead lift and disposal of surplusmaterial as directed by Engineer in charge and Mord specification for Rural Roads 2014. (Kutcha drain in Old BT region 0/1 - 8/25)

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.- Using Naturally Occuring Gravel

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.- By Mechanical Means

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. - By Mechanical Means

Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and laying Semi Dense Bituminous Concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects - Grading II - 10mm using VG - 10 bitumen

Bitumenous Concrete with Waste Plastic Techology :Providing and laying Bitumenous Concrete with 60-90 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregate of specified grading ,premixed with bitumenous binder and warm mix additives @0.4% by weight of bitumen ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher with sensor control to the required required grade ,level and alignment ,rolling with smooth wheeled ,vibratory and tendem roller to achieve the desired compaction as per MORTH SPECIFICATION clause no. 509 complete in all respects ,for Grading -II (Bitumenous binder @ 5.4% of mix)

Dismantling of Flexible Pavements and disposal of dismantled materials separately as per Technical Specification Clause 202 - 20mm Bituminous Course By Manual Means

Excavation in soil in hilly area by mechanical means without using Dozer including cutting and trimming of side slopes and a lead upto 20 m as per Technical Specification Clause 1603.1 (For Scupper ,catch pit causeway ,Minor Bridge )

Providing and laying of Concrete for reinforced concrete for structure including supply of all material labour T&P. shuttering .Centering royalty etc required for proper completion of work as directed by Engineer - in - charge, as per drawings and Technical Specifications Clauses 800, 1205.4 and 1205.5 of Mord specification for Rural Roads 2014. - RCC grade M25

Plain/reinforced cement concrete in substructure complete as per drawings and Technical Specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 of MORD Specification for Rural Roads 2014 - Nominal mix 1:2:4 (Hand mixed) (For Scupper)

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications Clauses 1002, 1010 and 1202 of MORD Specification for Rural Roads 2014.

Construction of C.R. Stone Masonary in Cement Masonary 1:5 including supply of all material, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-Charge, as per drawing and Technical Specifications Clause 305.1 of MORD Specification for Rural Roads 2014

Construction of C.R. Stone Masonary in Cement Masonary 1:4 including supply of all material, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-Charge, as per drawing and Technical Specifications Clause 305.1 of MORD Specification for Rural Roads 2014

Cleaning of fully choked scupper and catchpit complete as directed by the Engineer-in-Charge

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014. - Ordinary Kilometer Stone (Precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014. - 200 m stone (precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014 - 5th Kilometre Stone (precast)

Providing and Fixing 'Logo' of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 600 mm circular

Providing & fixing of PMGSY Logo Board (Retro Reflective Sheet) at starting point, end point and at every 5 Km distance of road length as per attached standard drawing duly painted and written as per direction of Engineer-in-charge and Technical Specifications of MORD specification for Rural Roads 2014.

Providing & fixing of Citizen Information Board (Retro Reflective Sheet) with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Providing & fixing of Maintenance Board (Retro Reflective Sheet) with PMGSY Logo at starting or prominent location as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - 25 mm nominal outer dia Pipes

Environment Protection Works - Installation of Wire Crates for Dumping Material

Maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907.Maintenance of Slab type Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908.Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909.Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910.Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912.Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat with bitumen emulsion, 20 mm thick pre-mix carpet using catonic bitumen emulsion and seal coat type B with bitumen emulsion.White washing of parapet walls of CD work and tree truncks white washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915.Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914.

1st Year

2nd Year

3rd Year

4th Year

5th Year

PANWAR CONSTRUCTION AND ASSOCIATES