NIT No-12 EE (SDW) II/ (21-22) Item No.11

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and ear thing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required (item Code. 1.10.0). Group C (item Code. 1.10.3)

Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (item Code. 1.14). 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (item Code. 1.14.2)

2 X 4 sq. mm + 1 X 4 sq. mm earth wire (item Code. 1.14.3)

Supply and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required of approved make. (item Code. 1.24) 5/6 amps switch (item Code. 1.24.1

3 pin 5/6 amp socket outlet. (item Code. 1.24.4)

15/16 amp switch. (item Code. 1.24.3)

6 Pin 15/16 amp socket outlet. (item Code. 1.24.5)

S/F Two module Stepped type Electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc as reqd of approved make (item Code. 1.25)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required of approved make. (item Code. 1.26)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required of approved make. (item Code. 1.32)

S&F of brass batten/angle holder i/c connection etc. as reqd. Of approved make. (item Code. 1.34)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc as required. Make: DJB Approved Makes only. (item Code. 1.44)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as reqd. (item Code. 1.5) up to 450mm sweep (item Code. 1.50.1)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . Make: DJB Approved Makes only (item Code. 2.5) 8 way (4+24), Double door. (item Code. 2.5.2)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCBDB complete with connections, testing and commissioning etc as reqd. of approved make. Make: DJB Approved Makes only. (item Code. 2.10.2) Single pole. (item Code. 2.10.1)

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: DJB Approved Makes only. (item Code. 2.13) 63A. (item Code. 2.13.2)

Supplying and fixing of 32 mm dia X 2.00 meters long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. (item Code. 12.34)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Upto 35 sq. mm (clamped with 1mm thick saddle)on wall surface as required. (item Code. 7.7.1)

Supplying, Installation, Testing and Commissioning of 4 feet nominal size LED having extruded aluminum housing, colour temperature 6500K having wattage 20-24 Watt and Lumen output not less than 2000 Lumens directly on ceiling/wall i/c connection with 1.5 sq mm FRLS PVC insulated copper conductor , Single Core Cable and earthing etc as reqd. Make: DJB Approved Makes only

Supply of 380 mm sweep, 900 rpm heavy duty exhaust fan operation on 230V, 50 Hz AC single phase supply etc. as reqd. (MR) Make: DJB Approved Makes only

Supply of ceiling Fan, 5 Star rating 1200 mm blade size with regulator copper winding Make: DJB Approved Makes only

Providing /Fixing of 70/72 watt LED, street light fitting pressure die cast AL. housing with heat resistant toughened glass & IP 66 Protection, complete with all accessories. Make: DJB Approved Makes only

Providing/ Fixing of junction/pole box suitable mounted on wall with clamp & suitable size nuts, bolts, hinged cover including 2no. Connector, connection with gland and termination and 1 no. SPMCB etc. as required. Make: DJB Approved Makes only

Supply of PVC insulated and PVC sheathed Aluminium Armoured Cable of size 2 core 16 sqmm tested on 1.1 kv. Make: DJB Approved Makes only

Dismantling old wiring, fan, tube fitting, PVC coldest etc.

HYDROCON ENGINEERS

GOGIA BROTHERS

R K CORRUGATEDBOX AND ALLIED PRODUCTS

RRPN GROUP OF SOLUTIONS