PMMSY - Cold Storage of 10T Capacity - Puthiyappa Base Station - Flake Ice - Civil and Electrical

Amount

Flake Ice Unit Installation Works

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

13.1.2 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Electrical

90.12.7.31 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

9.1.24 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

OD219987/2025-2026 Supply and drawing the following sizes of 50 sqmm ISI Marked FR LS PVC insulated single core copper conductor cable and making necessary connections in the existing panel/MCCB

OD219984/2025-2026 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 50 sq. mm

OD219986/2025-2026 Supply, Installation, Testing and Commissioning of wall mounting FN- TPN S-D-F in Sheet Steel Enclosure 415V, Three phase, 4 wire 50 hz, having Terminal Shrouds on both sides and Phase Barriers, Conforms to IEC 60947-3, IS/IEC 60947-3, Suitable for Cylindrical/DIN fuse-link, with Door interlock & padlock facility FN 160 TPN including Cylindrical/DIN fuse

90.16.1.6 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)

90.16.5.6 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.6. mm ( 4 SWG)

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD219985/2025-2026 Supply, installation, testing and commissioning of Column / Wall Mounting CubicalType Switch Disconnector Enclosure suitable for 415 V, Three Phase, 4 Wire 50 HzAC supply system having sufficient front surface area fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame works, covers and gland plates, cleaning and finishing complete with 7 tank process for Powder Coating in approved shade and then provided with Clear Coating, havin200 Amps capacity type TPN Aluminium alloy busbars of high conductivity, DMC / SMC / FRP busbar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., entire panel shall have a common copper earth bar of size 25 mm x 3 mm at the rear with 2 Nos. earth stud, solid connections from main busbars to switch gears with approved size of Aluminium busbars and control wiring with 2.5 / 1.5 Sq.mm FRLS(Flame Retardant Low Smoke) or HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables, cable alleys etc. complete as required. The panel Board shall conform to the Electrical Inspectorate standards and it shall only be manufactured after getting approval from the Engineer-in-charge, Consultantand the Electrical Inspectorate. BUSBAR 1 Runs of 32 mm x 6 mm Aluminium for each Phase 1 Runs of 25 mm x 6 mm Aluminium for Neutral INCOMER 1 Set - RYB Indication Lamps with Control MCBs 1 Nos - 200A 4P Switch Disconnector OUTGOINGS 1No -160A 4PMCCB 2 Nos - 63A 4P Switch Disconnector

OD219983/2025-2026 METERING KIOSK Supply, installation, testing and commissioning of Sintex KSEB metering panel, suitable for accommodating CT operated TOD meter and consisting of 3 nos. of 250 A cutout with HRC fuse, neutral link, ../5A 5VA CT for meter, inter connections etc. as required, and necessary supports with locable door with sealing facility having glass window for energy meter, sealing facility for KSEB, top canopy and necessary overhang, and all mounting accessories as required. The panel shall be with all accessories as per EI/KSEB specification. (Rate for Energy Meter not included)

Bidder Name

KOLAR MILL STORES