Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.3 LAccepted-AOC GE WEST BAREILLY | L1 | Accepted-AOC AOC | |
| 2 | L2₹62.9 L+₹5.9 L (10.3%)Rejected-Finance 110B CIVIL LINES BAREILLY 243001 UP | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Being High bid | |
| 3 | L3₹62.9 L+₹5.9 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Being High bid | |
| 4 | l4₹64.4 L+₹7.4 L (12.9%)Rejected-Finance | l4 | Rejected-Finance Being High bid | |
| 5 | l5₹65.8 L+₹8.8 L (15.4%)Rejected-Finance 35 A 60 RAMPUR GARDEN BAREILLY UP | BAREILLY | BAREILLY | UP | l5 | Rejected-Finance Being High bid |
Tender Value
₹93.2 L
EMD Value
₹1.6 L
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Office BAREILLY
HQ, CWE, MES, Station Road, Bareilly
CA NO.CWE BLY/GE (W) /49 OF 2023- 2024 SECIAL REPAIRS TO BLDG NO. 06 BSO YARD AND BLDG NO. T-173 OF DEF AND EMP COY HQ UB AREA UNDER GE (WEST) BAREILL
2023_MES_630184_1
8100/B/779/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST BAREILLY
As per NIT
6 documents required · 6 mandatory
₹1,000
GE West Bareilly
₹1.6 L
Yes
13 Feb 2024
28 Nov 2023
4 Jan 2024
28 Nov 2023
2 Jan 2024
20 Dec 2023
Amount
Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets/ pre-painted sheet in roof coverings sheeting, any gauge, thickness , nincluding Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling of timber framed structure as in fillets, rails, posts, rafters, purlins, etc 40 sq. cm and over in section complete all as specified and as directed.
Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)as in structural steel including distance pieces, cleats etc according to Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed.
M&L Rolled sections in main cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates according to Fe-110-W M(Gde-E- 250)M qulity-B as in structural steel complete all as specfied and as directed.
M & L in replacement with Second class hard-wood(sal) clean sawn in tie beem, rafter, purlin king post, queen post, strut etc as roof truss complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel (wave patterns type sheet) sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, L- type or J -type hooks or cranked bolts, and bitumen washer or fixed with self tapping screws complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws /L-type or J-type or cranked hook bolts complete all as specified and as directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for,complete all as specified and as directed.
M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in floors , finished rough to receive floor tiles complete all as specified and as directed.
M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in channel/benching/copping of manhole and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
S&F false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directed. including dismantling of old existing false ceiling complete all as specified.
M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
Supply only liquid water proofing compound conforming to IS specification
M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid compound mixed with cement mortar as per manufacturer's instruction complete all as specified and directed.(Note- WPC shall be measured and paid separately)
M&L Two coats of cement based paint on new plastered wall surfaces over a coat of any description including preparation of surfaces over a coat of primer complete all as specified and directed
M&L for preparation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying 1 mm thick wall care putty and two coats of oil bound distemper (OBD) over new plastered wall surfaces over a coat of primer of any description complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laying over 15 mm thick cement mortar 1:6 for floor finishes complete all as specified and directed.and Demolition/Dismenteling stone slabs and tiles of any description or thickness in floors/skirting including removing from the premises complete all as specified and directed..
S&F 20 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc over a screed bed of 15 mm 1:6 C:M complete all as specified and directed
Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame) exc 1.5 sqm and n exc 4.00 sqm incl removing from the premises complete all as spd and directed.
S&F Pressed steel frames size 106x60 mm (Thickness of PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. With and including filling of PCC 1:3:6 type C0(using 12.5mm graded stone aggregate) complete all as specified and directed.
S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chokhats with screw complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame) not exc 1.5 sqm each incl removing from the premises complete all as specified and as directed.
S&F steel windows with pressed steel frame of size of prifile 95mmx45mm (thichness of PBI sheet 1.25mm) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar (open out side ) and wie gauged openable shutter without glazing bar (open outside ) dovetailed or welded complete all as per DRG No TD /088 dt 07 Jan 2002, specified and directed (NOTE -(a)Two shutter ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (b) rate of filling PCC 1:3:6 type C0(using 12.50 mm graded stone aggregate) as in framed deemed to be included in quoted rates. (c) MS grill shall be measured and paid seperatly under relevent item of schedule. )
S&F mild steel framed work such as grill grating etc with ends of bar shouldered and/or rivetedbor forged into spikes framed guard bars barrel iron doors ladders framed balusters walk ways railing frame work of water tanks ,hole post and similar work conforming to Fe -290Gde -E-165 complete all as specified and as directed.
S&F, Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples complete all as specified as directed.
S&F in replacement 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S & F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring as specified and directed.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in replacement 20 mm dia stainless steel (304 grade) fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 150 mm size butt hinges medium weight stailess steel complete all as specified and directed.
S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as specified and directed.
M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 1000 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position including taking down old existing tank complete all as specified and directed.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed of bore of dia of pipe 20mm (minimum wt 210gm) complete all as specified and as directed.
Dismantling of cast iron/PVC/AC/SGSW pipes jointed in cement mortar and taking out of trenches and walls, if required complete all as specified and directed.
S&F in replacement 15mm bore tubes medium grade galvanised iron with and including all new fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F in replacement 20 mm bore tubes medium grade galvanised iron with and including all new fitting and fixed to walls and ceiling or laid in floors i complete all as specified and directed.
S&F in replacement PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F in replacement PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F in replacement vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.
S&F in replacement PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed
S&F in replacement PVC (SWR) floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F in replacement Vitreous China wash basin, wliile, flat back, size 450 x 300 mm excluding taps, waste, chain and plug and porcelain stopper but including bracket . fixed in position complete all as specified and as directed.
S&F in replacement fancy type chromium plated brass angle valve/stop cock/two way bib tap type suitable for 15mm bore pipe complete all as specified and directed.
S&F in replacement 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed.
S&F in replacement 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in replacement stainless steel ( anti cockroach type) grating complete all as specified and directed.
S&F in replacement chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laying over and including15 mm thick cement mortar 1:6 for floor finishes complete all as specified and directed.
All as per item No 59 but on verticle surfaces over and including 10 mm thick plaster in CM 1:6 complete all as specified and as directed.
M & L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tile over and including 10 mm thick rendering 1:4 complete all as specified and directed.
M&L for providing precast cement concrete rubber moulded chequered coloured tiles 20cm x 20cm x 25mm thick even finished on top of approved design and pattern laying over and including 40 thick PCC 1:3:6 type C1(using 20 mm dgradedstone aggregate) and 15 mm screed bed of CM (1:4) and sand filling complete all as specified and directed
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed.
M & L for 35mm thick plain framed glazed and skeleton shutter(factory made) open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood(sal), members of shutters as specified in SSR Part - I Section 8 clause 8.20 (a) fitted to chowkats all as specified and directed.( Note:- Glass/wire cloth shall be measured and paid separately.
Demolition of Reinforcement cement concrete of any description and in any position not otherwise specifically provided for, as specified and directed.
M&L for formwork to sides and soffits of floor or roof beam. beam hauchings. girders. bressum-mers.· lintels. cantilevers. shelves including supports. overhangs. etc. also splays between floors and beams. etc. with rough finish flat surface complete all as specified and directed.
M&L for formwork to soffits of suspended slab, laanding and similar work n. exc 200cm thick(horizontal or sloping) flat surface with rough finish complete all as specified and directed.
M & L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and directed.
M&L Mild steel TMT bars 5 to 8 mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel, beam and similar work over 1.5 meter span complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slab, supproted on wall, beam etc. and similar work complete all as specified and directed.
Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint complete all as specified and directed.
M&Lfor preparation of old plastered surfaces and one coat of white wash any description complete all as specified and directed.
M&Lfor preparation of new plastered surfaces and two coats of cement base paint over a coats of cement base primer of any description complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc as complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) as specified and directed.
M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in mass concrete or bed of manhole/drain complete all as specified and directed
Dismantling frame truss span n.exc 10 M complete all as specified and directed.
M & L for Steel work as in structural tubular hollow rectangular trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.
M&L 20 mm thick Granite of any colour (table rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and as directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 as in half brick work , complete all as specified and directed.
Pressed steel frames size 125 x 60 mm (thickness of PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, including filling of PCC 1:3:6, type C0 (using 12.50mm graded stone aggregate) supplied and fixed complete all as specified and as directed.
S&F 100 mm size butt hinges medium weight stailess steel ISI marked complete all as specified and directed.
S&F in replacement 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame complete all as specified and as directed.
S&F in replacement vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, 32 mm diaCP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed ..
S & F in replacement fancy type 125mm size square brass CP shower rose complete all as specified and as directed.
S&F in replacement brass CP tubular towel rail including a pair of CP brass bracket complete all as specified and as directed.
S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and as directed.
S&F in replacement fancy type chromium plated brass angle/stop valve type suitable for 15mm bore pipe complete all as specified.
S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.
S&F in replacement of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for 150 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars laying over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) to drain pipes including packing under haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
M&L Providing pre cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggergate ) as in precast RCC Manhole/speptic tanks covers including all form work and setting in CM 1:4 complete all as specified and as directed,
Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced) 150mm dia set in cement mortar complete all specified and directed.
Cutting into existing manholes fro connecting new drains making good to open and rendering, cutting out existing benching for and forming branch chanel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required of internal dia 150mm complete all specified and directed.
M&L for Machine pressed precast conctete interlocking paver block ISI marked with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning including watering and consolidation incl dismantling of existing tiles complete all specified and directed.
Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and as directed.
Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified.
Taking down submain wiring including all accessories complete all as specified and directed.
Material and labour for point wiring with single core PVC sheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) including pressed steel terminal sunken boxes and covered with 3 mm thick plastic laminated sheet cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable FRLSH with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.
(b) One 5 pin 6 Amp switch socket out let point on an independent board complete all as specified and as directed.
(c) One 5 pin 6 Amp socket out let point controlled by one switch on same board complete all as specified and as directed.
(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and as directed.
All as per item 106 here in before but for one 16 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLSH PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified.
S&F switch piano flush type 6 Amp single pole one way complete all as specified and as directed.
S&F socket out let 2 in 1 flush type 6 Amp 5 Pin complete all as specified and as directed.
S&Fswitch piano type 16 Amp flush type 240 Volt complete all as specified and as directed.
S&Fsocket out let 6 Pin 2 in 1, 6/16 Amp flush type 240 Volt complete all as specified and as directed.
S&F bell push flush type 6 Amp complete all as specified and as directed.
S&F bell ding dong musical ,AC, 230 Volt, single pole complete all as specified and as directed.
S&F ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
S&F in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .
M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed
S&F in replacement LED light fitting of 1 x 10 watt T-5 lamp type with electronic ballast of suitable capacity, clear acrylic cover including mounting on wall complete all as specified and directed.
Supply and fixing surface mounting LED light fitting aluminium extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and Fix LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed.
S&F security light fitting, LED type, 30 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FRLSH) and one run of 4.0 sqmm (FRLSH) copper conductor shall be measured as one unit length.)
Taking down carefully ceiling fan and keeping in safe custody for reuse at site after bldg repair including spray painting of ceiling fans complete, in situ with synthetic enamel paint including filling cavities with filler , one coat after cleaning all dust etc.
S&F in replacement MCB SPN, 40 Amp, 240 volt, 10 KA, 'C' curve complete all as specified and directed.
S&F in replacement MCB SP, 6 to 32 Amp, 240 Volt, 'C' curve, 10 KA complete all as specified and directed.
S&F in replacement MCB TPN, 40 Amp, 415 Volt, 'C' curve 10 KA complete all as specified and directed .
Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.
S&F in replacement flush sheet metal enclosure TPN DB 4 way 415 V with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete
M&L for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as electric plate No. 3 of SSR Part-I complete all as specified and directed
M&L for sub main wiring with two single core 4.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FRLSH) and one run of 2.5 sqmm (FRLSH) copper conductor shall be measured as one unit length.)
Taking down carefully exhaust fan and keeping in safe custody for reuse at site after bldg repair including painting of Exhauset fan complete with synthetic enamel paint by spraying including filling cavities with filler, in smoke grey colour paint one coat after cleaning all dust etc. complete all as spd and directed.
S&F including testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core including taking down of existing cable complete all as specified and directed..
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
M&L for sand cushioning laid in trenches for laying of LT UG cables complete complete all as specified and as directed.
M&L Fly ash bricks conforming to IS 12894 -2002 specification for LT UG cable protection complete all as specified and as directed.
S&F GI tubes light grade of dia 50 mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and as directed.
M/S Rajeev Sharma and Co.
Harsha Consultant and Builders
REHAN CONSTRUCTIONS
M/S Shree Sai Builders
MARUTI BUILDERS
Builders Harpal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .