Webel IT Park KalyaniII 07 IDM 20 21 39

Amount

CHAIRS :-

High Back Chairs : For Manger Cabins Supply, fitting and installation of Executive High Back chair with overall dimesnion of height - 1200 to1350mm, width & depth - 650 to 800mm. The seat should be made up of 10-13 mm thick hot pressed plywood and moulded PU foam, back should be made up of injection moulded glass filled nylon and the seat & back should be upholstered using Quitted Leatherette fabric. .The armrest top should be moulded from polyurethane (PU) and should be height adjustable(6+/-.5 cm) type in differenet levels. The chair should have 360 degre revolving facility, synchronized tilting mechanism,continous adjustable lumbar support, multi point tilt locking features. The chair should have Pneumatic seat height adjustment facility (6+/-.5 cm), the pedestal should be 5 prong chrome plated pedestal with twin wheel nylon castors.

Mid Back Chairs : For Workstations, visitors,others Supply, fitting and installation of Executive Mid Back chair (Overall dimesnion: Height - 900-1100mm, width & depth - 650-800mm) The seat should be made up of 12 - 14 mm thick hot pressed plywood & moulded PU foam upholstered with fabric. The back should be made up of injection moulded glass filled nylon and upholstered with mesh fabric.The armrest top should be moulded from polyurethane (PU) and should be height adjustable type. The chair should have 360 degre revolving facility, synchronized tilting mechanism,continoous adjustable lumbar support, multi point tilt locking features. The chair should have Pneumatic seat height adjustment facility (6+/-.5 cm), the pedestal should be 5 prong chrome plated pedestal with twin wheel nylon castors.

High Back Chairs : For Conference Supply, fitting and installation of Executive High Back chair (Overall dimension of height - 1100-1300, width - 650 to 800mm, depth - 650-800mm). The seat & back should be made up of 10-13 mm thick hot pressed plywood and moulded PU foam and should be upholstered with synthetic leather.The armrest top should be moulded from polyurethane (PU) and should be height adjustable(6+/-.5 cm) type. The chair should have 360 degre revolving facility, synchronized tilting mechanism,continoous adjustable lumbar support, multi point tilt locking features. The chair should have Pneumatic seat height adjustment facility (6+/-.5 cm), the pedestal should be 5 prong chrome plated pedestal with twin wheel nylon castors.

Cafe Chairs : Providing and installation of Cafeteria chair with seat & back finished in plastic PU finish and frame made of SS.

Chairs for Training Room: Supply, fitting and installation of Training Room Chair with desklet (Overall dimension of height - 850-1000mm, width - 650 to 800mm, depth - 650-850.mm) The seat sub-assembly is made up of 12-14mm hot pressed Plywood upholstered with moulded foam and polyester fabric & covered with an injection moulded polypropylene outer cover. The seat can tip-up when not in use and this feature can be used while stacking the chairs horizontally. The back sub assembly is made up of injection moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection moulded polypropylene outer cove. The chair should have back flexing features, flip up wide desklet, broad armrest and brake castors with powder coated (40 to 60 micron) 4 leg structure for free movement for manoeuvring the chair.

Cafetreia Table

Cafeteria 4 seater Table : Supplying fixing of Cafetria table square (900X900mm) or circular (900mm dia) Understructure assembly consist of top plate, minium 3inch circular hollow MS ERW tubular support structure with square/circular bottom plate and whole understructre is epoxy polyester painted (40-50 DFT). The top base contains holes for fixing table top to it. Table top: 25 mm prelam MDF with PU coating.

SOFA : a) Supplying, fixing of best & premium quality sofa with armrest-LH & Armrest-RH for Under structure: Seat & Body under structure is made of combination of water proof plywood & pinewood members. Plywood is 12± 1mmthk. (moisture resistance & termite proof as per IS:303) & pine wood are cross section (22x64, x22x 40, x22x 100 & 34 x 64)mm are without major knots & defects on the surface. 3.8mm zigzag spring asly. Is mounted on the seat structure with spring mounting plastic clip for support & additional cushioning purpose. Paper coated MS rod is connected with all the spring with clips to give strength to the spring. Non-woven fabric is stapled on the seat structure frame above the spring asly. To avoid the tearing of seat PU foam with the surface contact of metal spring. Complete under structure is made by gluing, nailing & stapling. 3mm MDF & 2mm cardboard is stapled on the structure for PU foam sticking surface or for upholstery stapling reference. Back Top Cushion & Armrest under structure is made of combination is 12± 1mm, 6± 1mm plywood & pine (moisture resistance & termite proof as per IS:303) wood of 22x40 mm & combination 12± 1mm, 6± 1mm plywood, 3mm MDF & pine wood 22x40 for small corner with gluing & stapling. Two number of cushion belts are provide in the back rest plywood for enhanced comfort. Powder coated MS hook of 1.2mm thk. Are mounted on the back side of cushion for mounting the cushion with the body structure

b) Foam: Seat is made of PU foam with density 28Kg/cum. With an additional top layer of super soft PU foam with density 32Kg/cum. Recron sheet of 200GSM is wrapped & glued above this seat top foam. Seat front bottom vertical surface is glued with the PU foam with density 28kg/cum. Side vertical surface, body front taper vertical, back vertical surface & top horizontal surface is glued with PU foam with density 28kg/cum. Back Top Cushion is made of two layers of super soft PU foam with density 32Kg/cum. One additional layer of memory foam of density 70kg/cum given on the super soft foam layers in the backrest cushion for enhanced comfort. Recron sheet of 200GSM or leatherette option is wrapped & glued above this foam. Armrest is made of super soft PU foam with density 32Kg/cum. . Recron sheet of 200GSM or leatherette option is wrapped & glued above this foam

c) Upholstery: Seat, Armrest & Back Top Cushion Top upholstery is made in the dual tone colour with polyester pattern fabric & leatherette option. Leg: Back top Cushion are fitted with the seat & body structure with the M6 Butterfly nut & washer on top surface & MS hook on taper front body structure.(1no Cushion for1 seater sofa) Leg: Plastic PP moulded legs are used & fitted at the bottom surface with the chipped screws. Before fixing legs no- woven fabric is stapled on the bottom surface to cover the structure. The products should be tested as per BIFMA standards. The product should have ISO 9001:2000 and ISO 14001-2004, OHSAS 18001:2007 certifications, BIFMA SILVER or FIRA & IGBC Green GREENGUARD certified. The above modular partition should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary. services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

d) 3 Seater Sofa Size- Total width/ Length 3 seater 2010mm x Total Depth 900mmx Total Height 800mmx Seat depth 570mmx Seat Height 465mmx Seat- Back Angle 1050 x leg Height 23mm.

e) 2 Seater Sofa Size- Total width/ Length 2 seater 1340mmx Total Depth 900mmx Total Height 800mmx Seat depth 570mmx Seat Height 465mmx Seat- Back Angle 1050 x leg Height 23mm.

CONFERENCE TABLES

Co Working CONFERENCE TABLE : Supplying fixing and installation Boat/ U/ Ellipse/ Semi Ellipse/ Oval Shape 10 Seater Glass Conference Table (minimum 3200x 1200 x750 ht). Worksurface shall be 12mm thick toughened glass with back painted design on to under side and crystal edge polish finish.All panels shall made from 36mm Thick Pre–laminated board with 2mm thick PVC edge beading. Understructure consists of storage for CPU, projector and paper storage. Provision for glass adjustment for glass aligning. Design should be such that all electrical cabing shoud be hidden and plug points shall be easily accesible by seaters.The products should be tested as per BIFMA standards. The product should have ISO 9001:2000 and ISO 14001-2004, OHSAS 18001:2007 certifications, BIFMA SILVER or FIRA & IGBC Green GREENGUARD certified. The above table should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Main CONFERENCE TABLE : Supplying fixing and installation Boat/ U/ Ellipse/ Semi Ellipse/ Oval Shape Shape 14 Seater Conference Room Table (Min 4200x 1200 x750 ht) Table work surface (Veneer) made of 31mm ± 1.5mm ( 18mm +12mm MDF as per IS 12406 Natural veneer on top surface and balancing 1.0mm laminate on bottom surface )chamfer edges & veneer portion of work surface in finished in PU matt or glossy polish. The table under structure legs or support made of 60to 70 micron powder coated with Epoxy polyester aluminium extrusion (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002). VEIL & Cross Members made from 18mm thk. Prelam MDF and PVC edge banding on all the sides. Access Flap & Switch Mounting tray (Minimum 2nos): Made from Anodized (10to 15 micron) aluminium extrusion and plastic moulded components to facilitate access of Electrical / Data / Voice sockets access from top. Powder coated (DFT 40-60 Microns) switch mounting tray made from 0.8/1.2mm CR Steel IS-513. Switch to be mounted on tray as per requirement. The products should be tested as per BIFMA standards. The product should have ISO 9001:2000 and ISO 14001-2004, OHSAS 18001:2007 certifications, BIFMA SILVER or FIRA & IGBC Green GREENGUARD certified. The above table should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Phoenix Machines Pvt Ltd

VYAS & CO.

IMPRINT TRADING PRIVATE LIMITED