SPECIAL REPAIR TO BLDG NO P-5/10 FAFA QTR AND PROVISION OF TERRACE TILES AND ROOF TREATMENT AT BLDG NO P-5/13 (BDE OFFR MESS) AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

All as per item No 4 above but except material complete all as specified and as directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws including dismantling of old boarding The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.(Make Diamond /Everest/Visaka)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

M & L, double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed

M & L, double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.42 sqm and not exceeding 1 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match including 10mm thick rendering in CM 1:4 and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed

S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

S&F coloured Glazed ceramic tiles in vertical surface exceeding 0.12 sqm and not exceeding 0.18 sqm & of thickness 7-8 mm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor /roof surface complete all as specified

M&L PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar complete all as specified and directed.

S&F non skid tiles, exterior grade, chequered/grooved pattern of size exceeding 0.18 sqm and not exceeding 0.38 sqm 10-12mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A'

M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 incl Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed .

M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete including all as specified and directed.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for applying two coat OBD on newly plastered wall over a coat of primer applied over one coats of wall care putty of 1-1.5mm thickness prepared and sanded Manually, application tobe done by roller complete all as specified and directed.

M&L for complete removal of old treatment and applying two coat OBD on Old plastered wall over a coat of primer applied over one coats of wall care putty of 1-1.5mm thickness prepared and sanded Manually, application tobe done by roller complete all as specified and directed.

M&L for complete removal of old treatment and applying two coat OBD on Old plastered Ceilling over a coat of primer applied over one coats of wall care putty of 1-1.5mm thickness prepared and sanded Manually, application tobe done by roller complete all as specified and directed.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F in repairs 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair CP brass wall mixer (with L bend for supply to showerr) for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair CP brass kitchen mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 125 mm CP brass shower rose for fixing with 15mm pipe complete all as specified and directed.

S&F in repair 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Ditto all as per Item No 38 above item but 20 mm bore

Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) including dismantling of existing stone slab complte all as specified and as directed.

S & F in repairs vitreous china hand wash basin ( OVAL IN SHAPE) white exclusive quality, size 520 X 450 X 200 MM incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F in repairs 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store.

Ditto as per Item No 47 above but n.exc 1.5m2 each -ditto-.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specified and as directed.

S&F for Pressed steel frames for doors (105X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed

S&F 30 mm thickness Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as spd and directed

S & F 32mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

S&F, Plain- wooden WPC door frame of size 100mm x65mm BLDG Grade ,780 dencity with decorative Single Pattam in opening as per specification complete all as specified and directed by Engr-in-charge.

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tube of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top bottom and lock rail MS frame shall have a coat of primer of approved make and manufacturer The inside Panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm thick wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm ) thick plain / prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel ALl the four edged lipping to pe painted with PVC ink of matching colour of PLAIN/PRELAM moulded PVC sheet of door 0.20 mm thick (5 mm x 4 mm ) thick PVC sheet to be given for lock provision at lock height door to be fixed with frame with 3 nos SS butt hinges of size 100 mm x 25 mm x 25 mm and 50 mm long steel screw drilled suitable for to pass through both the wall of th MS tube other hardwares could be fixed with 25 mm x 8 mm size steel screw etc complete as per direction of engineer in cahrge manufacturer specification and drawings

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and wiremash and includes all other connected accessories Net opening will be measured or payment purpose.) (A) Area not exceeding 2.00 sqm each.

S&F 18 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.

S&F in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as directed and specified.

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F 125 mm aluminium anodised barrel tower bolts of extruded section all as specified.

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repair 25 mm dia fancy type SS Curtain rod fixed with SS bracket and lattoo to wall complete as sample approved all as specified and directed by Engr - in - charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F 4-4.5mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

Ditto as per Item No 66 above but 4-4.5 mm thick sheet glass ground or Obscured or frosted on one side and ditto

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified.

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors/ walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for RCC type B1 (1:2:4), 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including form work complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

Raking out joints/pointing built in cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses, washing the joints and removing rubbish off the premises complete.

M&L for raised pointing to random polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

S&F in repair 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length as in weep holes complete all as specified and directed.

S&F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as spd and directed

S&F in repairs stainless steel kitchen plate racks of size 600 x 900 x 250 mm made out of 1 mm thick steel sheet complete all as specified.

M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed .

M&L for rendering 10 mm thick , in cement mortar 1:4 over RCC slab, mixed using water proofing compound liquid @ 200 ml per bag of cement. Complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for cutting chases, pinning in brick/PCC blocks wall for app membrane and making good to facings where required and pointing in cement mortar 1:3. complete all as specified and as directed

S&F Heavy duty outdoor tiles of size not exceeding 0.36 sqm, 8-10mm thick set and jointed in neat cement slurry laid with 2 mm spacer filled with epoxy grout of colour as specified by engr-in-charge, as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M&L for brick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete incl welding etc (if reqd) all as specified and directed.

M & L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, Parapet walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc.complete all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and removing material for taking credit (credit for material should be made as per condition sepretly) and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring of one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size min 20 mm dia with all fittings (ISI Marked) controlled by one switch including GI modular sunken box of thickness not less then 1.2 mm with cover frame(Inner/Outer) for mounting modular type switches, socket and regulators , including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Point wiring of one light point controlled by Two way switches with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size min 20 mm dia with all fittings (ISI Marked) controlled by one switch including GI modular sunken box of thickness not less then 1.2 mm with cover frame(Inner/Outer) for mounting modular type switches, socket and regulators , including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Point wiring for one 3 piin 15 Amps socket outlet independent with 4 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including minimum 20mm dia non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 4 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor, connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified.

Point wiring for one 3 pin 15 Amps socket outlet independent with 4 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including minimum 20mm dia non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 4 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor, connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified.

Point wiring for one 3 piin 5 Amps socket outlet independent with 2.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including minimum 20mm dia non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 2.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor, connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified

Point wiring for one 3 piin 5 Amps socket outlet on the same board with 2.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including minimum 20mm dia non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 2.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor, connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified.

S&F in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

S&F switch modular type single pole one way 1 module 6 amps 240 volts.

S&F switch modular type single pole two way 1 module 6 amps 240 volts.

S&F switch modular type one way 1 module 16 amps 230 Volts.

S&F socket 6 amps modular type 2/3 pin combined 2 module , 230 volts.

S&F socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten/ Angular fittings and making connection etc complete all as specified and directed

S&F celing rose surface bakelite AC 220/230 V complete all as specified and directed.

S&F Modular type Electronic fan regulator stepped type,two module with five step 240 volts,120Watt suitable for 1200/1400 mm sweep AC ceiling fan complete, all as directed by Engineer in charge.

S&F Modular bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed.

S&F Multi Music type bell electric multi music type / AC SP 240 Volts Complete all as specified and directed.

S&F in replacement of inverter type LED lamp 6500 K, 900 lm of 12 W, base cap B-22 with poly carbonate diffuser and aluminium heat sink complete all as specified an directed.

S&F in replacement of Tube light fitting integrated type suitable for LED 20W(4 feet) efficacy 125 lumens/watt, indoor decorative LED batten complete with polycorbonate housing with all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed.

S&F in replacement of Tube light fitting integrated type suitable for LED 10W (2 feet) efficacy 125 lumens/watt, indoor decorative LED batten complete with Polycarbonate housing with all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed.

S&F in replacement of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC, in multiple optics,Outdoor type with high pressure die cast aluminum housing, IP-65, with 4 KV inbuild surge protection driver and heat resistant complete with driver, fixing the same by GI pipe medium grade minimum 25 mm dia bore pipe with two nos FI clamps of 40X4 mm duly painted and suitable size of nut and bolts etc and making poper electric connection with three core flexible copper wire complete all as specified and directed.

S&F in replacement of modular type AC Box steel enclosure plug and socket copmlete with one SP MCB 20 Amps, 240 Volts.

S&F in replacement of TPN DB, 4 Way, as per IS-8523, IP-42 protection, universal mounting with 200A copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCB 5 Amps TPN as incomer and MCB TP as outgoing, with and including provision for MCCB/MCBs & making necessary electrical connection for Incoming & outgoing cables, with copper lugs, crimped with crimping tool

S&F MCB C- Curve of four pole TPN, 415 Volts, 100 Amp ultimate breaking capacity (Icu)-10 KA.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

S&F Amp rating 240,10 KA C- curve MCB SP of 6 to 32 Amp with connection testing and commisioning.

S&F Amp rating 240,10 KA C- curve MCB DP SPN of 40-63 Amp with connection testing and commisioning.

M&L for Earthing in repair complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.

Taking down electric energy meter single phase any size or type from existing site and refixing the same at place after carrying out necessary repair work and making the surface good to match with existing surface all as specified and directed.

M/S G. S. MATIYANI AND SONS (BID ID -3473405)

M/s Rana Enterprises (BID ID -3479256)

m/s RC punetha (BID ID -3476370)

m/s harish kumar punera (BID ID -3475265)

M/S GD Punetha Son (BID ID -3479913)