REPAIR TO APPROACH PATH, CULVERTS AND HARDSTANDING AT CERTAIN LOCATIONS OTM ACCN AREA UNDER GE NORTH BINNAGURI

Amount

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for all complete as specified and as directed.

M&L for RCC type B1 (1:2:4) using 20 mm graded aggregate in floor slab all as specified and as directed.

S&F mild steel Thermo mechanically treated (TMT) bars 8 mm dia, as in reinforcement, cut to length, bent to shape required including cranking, hooking end and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all complete as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified as directed.

Raking out joints/ pointing to brick work built with cement mortar in walls or to bricks on edge/flat in floors, surface channels, roofs, etc, complete all as specified as directed.

M&L for Flush point to brick laid on edge in paving in CM 1:3 complete all as specified.

M&L for Flush point to brick laid on flat in paving in CM 1:3 complete all as specified.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified.

M&L for brick works with fly ash bricks old size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as directed.

All as per Item No 9 above but without bricks.

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. laid dry and pointed in cement mortar complete.

M&L for bricks works with sub class 'B' bricks laid on flat in floors/tapered wall of drain bedded and jointed in CM 1:6 and pointed in cement mortar 1:3 using old size brick complete all as specified and as directed

Ditto as per above item No.12 but without brick as in laid flat

M&L for bricks works with sub class 'B' bricks laid on edge in floors/tapered wall of drain bedded and jointed in CM 1:6 and pointed in cement mortar 1:3 using old size brick complete all as specified and as directed

All as per item No.14 above but without brick as in edge

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC 1:3:6 type C2 (with using 40mm graded aggregate) as in saucer drain, storm water drain, bed of drain etc like water throughs including forming channels complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Providing and laying of 300x300 mmx10mm thick Anti-Skid pavement tile in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer- in - Charge .(Note: Design/pattern shall be as approved by GE at the time of execution)

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path with grey cement and pigments including 20 mm thick screed bed or bedding layer of cement mortar 1:6 all as complete and as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern by GE/Engr-in-Charge as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern as approve by GE/Engr-in-Charge over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling old existing blocks complete all as specified and directed by GE/Engr-in-Charge.

M & L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including dismantling old existing blocks complete all as specified and as directed

M&L for 75 mm thick cement concrete type C2 1:3:6 with 40 mm graded stone aggregate as in sub base to receive a surface as specified as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for providing cement concrete type B1 1:2:4 with 20 mm graded aggregate in kerbs, coping etc rounded or chamfered on edge complete all as specified and as directed.

M&L for two coats of synthetic enamel (ordinary tint) of approved colours (Yellow. White. Black. Red etc) over priming paints plaster coat on new kerb stone/concrete etc surfaces of any description over 10cm girth or width, not otherwise described all as specified and directed.

S&F in repairs of Reinforced concrete pipes of 450mm dia, class NP2, laid and jointed complete with collars including all necessary joints, waste, cutting etc all as specified and directed.

S&F in repairs of Reinforced concrete pipes of 300mm dia, class NP2, laid and jointed complete with collars including all necessary joints, waste, cutting etc all as specified and directed.

M&L for PCC 1:3:6 type C2 (with using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed

Taking down cement plaster on wall of any description incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces, finished even & fair without using extra cement all complete as specified and as directed

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour as specified as directed.

M/S SHYAM ENTERPRISE (BID ID -3475432)

SS SHARMA (BID ID -3475588)

L. B. SHARMA (BID ID -3476213)

M/S S.K. CONSTRUCTION (BID ID -3476521)

MESSRS SEN BROTHERS (BID ID -3476589)

M/S PLABAN KUMAR GOPE (BID ID -3476553)