Constg. One Additional Classroom with stair (RECTANGULAR SHAPE 6.00 X 5.50 MT) @ (1) Shri Mahatma Gandhi UUB Ashramshala Chandla Ta.Garbada & (2) Shri Sarvoday Ashramshala Salapada. Taluka Dahod. District. Dahod under 2225 MMBVSUY 2025-26. (Total 2 Works) (Reinvite 2nd Attempt)

No. figures Amount

Civil Work

1 Excavation for foundation up to 1.50 mt. depth including sorting 143.72 Cum 160.89

out and stacking of usefull materials and disposing of the

excavated stuff up to 50 meter lead ( B ) Dence and hard soil

2 Providing & Laying Brick bat cement Concrete 1:5:10 (1Cement : 24.58 Cum 2517.14

5Coarse sand :10 graded brick bat aggregate 40mm nominal

size) in foundation and curing complete excluding cost of

3 Providing and laying cement concrete work 1:2:4 ( 1 cement : 2 24.84 Cum 4521.07

coarse sand: 4 graded stone aggregate 20 mm nominal size )

including the cost of form work with curing etc. complete.

(A) Foundation footing base. Wall Caps/Copping.

4 Brick work using common burnt clay building conventional bricks 24.02 Cum 3853.23

having crusing strength not less than 35kg/sq. cm. In foundation

and plinth in cement mortar 1:6 (1cement:6 fine sand)

5 Filling with the available excavated earth (excluding rock) in 114.98 Cum 137.47

trenches, plinth,sides of foundation etc.in layers not exceeding

20cm in depth consolidating each deposited layer by ramming

and watering.

brought from out side in layers of 20cm thickness and

consolidating etc. complete.

7 Providing & Laying brick bat cement Concrete 1:4:8 (1 Cement :4 14.02 Cum 3653.61

Coarse sand:8 graded brick bat) in plith and curing complete

exculding cost of formwork.

8 Providing and laying cement concrete work 1:2:4 ( 1 cement : 2 11.88 Cum 4521.07

coarse sand: 4 graded stone aggregate 20 mm nominal size )

including the cost of form work with curing etc. complete.

(A) Foundation footing base. Wall Caps/Copping

9 Providing and laying cement concrete 1;2:4 (1 cement: 2 coarse 1.14 Cum 5770.89

sand: 4 graded stone aggregate 20 mm nominal size) including

the cost of form work with curring etc. complete (A) Column /

Vertical Fins( Vertical fins up to floor level)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Brick work using common burnt clay building conventional bricks 73.58 Cum 4141.66

having crusing strength not less than 35kg/sq. cm. In super

structure in cement mortar 1:6 (1cement:6fine sand)

11 Half brick masonary in common brunt clay building conventional 38.92 Sqm 640.89

bricks having crusing strength not less than 35kg/sq. cm. In

foundation and plinth in cement mortar 1:4 (1cement:4fine

sand)in super structure including curing etc. complete.

12 Providing and laying cement concrete 1;2:4 (1 cement: 2 coarse 10.00 Cum 11150.04

sand: 4 graded stone aggregate 20 mm nominal size) including

the cost of form work with curring etc. complete (A) Column

13 Providing and laying cement concrete 1:2:4 ( 1 Cement : 2 3.26 Cum 10219.39

Coarse sand : 4 graded stone aggregate 20 mm. nominal size )

for R.C.C lintel including finishing smooth with curing etc.

complete including the cost of formwork but excluding the cost of

reinforcement .

14 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 0.68 Cum 6541.62

Coarse sand : 4 graded stone aggregate 20 mm. nominal size )

for R.C.C chhajjas not exceeding 10 Cm. thickness up to fllor

two level including finishing the exposed surface with cement

mortar 1:3 (1 cement :3 fine sand ) to give a smooth and even

surface centering and formwork and curing complete excluding

the cost of reinforcement.

15 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 14.94 Cum 7665.60

2- coarse sand : 4- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement for

R.C.C work in A) Beam (ii) having cross sectional area more

than 0.08 Sqm. and upto 0.12 Sqm.

16 Providing and laying dinary orcement concrete 1:2:4 ( 1 cement : 16.80 Cum 6888.15

2 coarse sand: 4 graded stone aggregate 20 mm nominal size )

and finishing smooth with curring etc. Complete including the

cost of form work but excluding the cost of reinforcement for

R.C.C work in (iii) slab having more than 10 cms and up to

cms. thickness.

17 Providing and laying controlled c.c.M.200 & curing complete 2.96 Cum 9139.49

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Stair case upto

floor two level for G.F.

18 Providing formwork with sheathing of steel sheet so as to give a 39.52 Sqm 98.84

fair finish including centring, shuttering, strutting and propping

etc., height of propping and centring below supporting floor to

ceiling not exceeding 4m and removal of the same for in situ

reinforcement concrete and plain concrete work in stair cases

with sloping or stepped soffits including risers and stringer

excluding landing etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

19 Providing I.S.I.T.M.T.Bars Fe.500D steel reinforcement (ISI 5638.02 Kg. 77.29

mark) Confirmed to IS-1786 for RCC work including bending,

binding and placing in position etc. complete .For all floors.

20 Providing 15mm thick cement plaster in single coat on rough or 593.04 Sqm 201.79

fair side of single of half brick wall for plastering finished even

and smooth in cement mortar 1:6(1 cement 6 sand ) and

finishing with a floating coat of neat cement slurry and watering,

curing etc. complete.

21 20mm thick sand faced cement plaster on walls upto height 10mt 339.22 Sqm 353.98

above ground level consisting of 12mm thick backing coat of

cement mortar 1:3(1 cement: 3 sand) and 8mm thick finishing

coat of cement mortar 1:1 (1 cement 1 sand) watering, curing

etc. complete.

22 Finishing wall with water proofing cement paint of on wall 339.22 Sqm 62.43

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remains of loose

powered materials.

23 Providing and laying polished Kota stone slab flooring over 148.60 Sqm 1019.39

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

24 25mm thick polished Kotah stone flooring for staircase treads ( 27.88 Sqm 1205.60

two pieces with three groves in front of steps) over 10mm

(average) thcik base of cement mortar 1:3 (1 cement 3 coarse

sand) laid over and jointed with grey cement slurry including

curing, rubbing, and polishing etc. complete.

25 Providing & Fixing 25mm thick polished Kotah stones for 9.08 Sqm 1019.39

c.b.shelf ,seating plat form,including curing,rubbing polishing

etc.complete.

26 Providing and applying Dampproof course on terrace of 2.00 Job 21715.00

approved brand .

27 Providing cement vata (10cmx10cm size)quartar round in 56.72 Rmt. 24.28

cement mortar 1:1 including neat cement finishing, watering etc.

28 Providing & Fixing in position M.S.Angle 40mmx40mmx6mm 9.60 Sqm 2751.54

Angle frame for door and 35mmx35mmx5mm angle frame for

shutters, 18 gauge iron sheet of shutters with 4 nos. of hold

fasts for door as per the approved drawong & design including

applying a priming coat of red lead paint and all necessary fittings

fixtures,locking arrengements etc.complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

29 Providing and fixing window having extruded aluminum Colour 11.80 Sqm 1705.67

Powder Coated section frame main outer size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member

size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt,

vertical member of size 61.85 mm x 31.75mm x 1.30 mm @

wt.of 0.0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete

for window

30 Providing & Fixing 50mm diameter G.I. rain water spout of 8.00 Each 492.88

60cms.Long etc, complete.

31 White washing with lime on undecorated wall surfaces, 3 coats to 593.04 Sqm 18.99

give an even shade incuding thoroughly brooming the surface to

remove all dirt,dust,mortar drops and other foreigh matter.

32 Providing and fixing 20cm. x 15cm x 2.5 cm. thick year plate of 2.00 Each 303.00

marble stone set in C.M. 1:4 including finishing and engraving

letters etc. complete.

Total of Civil Work

Electrification Work

33 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 14.00 Pt. 499.95

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Ca-III [1-2-1]

34 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 8.00 Pt. 701.95

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Ca-

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

35 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 8.00 Pt. 528.23

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories. [I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Ca-

36 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 4.00 Pt. 780.73

from mcb db board. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Ca-III [1-

37 Point wiring for on board Looped Plug with 6A Modular type 8.00 Pt. 268.66

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories. Ca-III [1-2-4]

38 Providing and erecting Mains with 1.1 KV grade FRLS PVC 40.00 Mtr. 90.90

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

39 Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 Ea. 484.80

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Tube Light with integral driver. (iv) 22 Watts, Surge - 2KV,IP-20,

conventional 4 feet. Ca-III [2-16-2]

40 Supplying and erecting led lamps with following wattage capacity 8.00 Ea. 146.45

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built, surge,protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP holder. (ii)

8 watts [2-16-3]

41 Providing and erecting Miniature circuit breaker single pole 6A to 6.00 Ea. 131.30

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Ca-III [3-10-1(B)]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

42 Providing & erecting 240 V MCB double pole switch for lighting 2.00 Ea. 348.45

Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity (B) 40 Amp. Ca-

43 (A) single phase incoming and horizontal single phase outgoing. 2.00 Ea. 1759.42

(b) sheet steel double door (IP-43) (iv)12 way [3-11-5 A b]

44 Providing and erecting Approved make RCCBs conforming to IS: 2.00 Ea. 2636.10

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (iI) 40 Amps. DP Cat-III [3-12-1]

45 Supplying & erecting earth pit of minimum bore dia.150mm size 2.00 Ea. 5416.63

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil Length of

pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg. [3-14-9]

46 Providing and erecting Approved make Ceiling fan with double 4.00 Ea. 1717.00

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm. sweep complete, canopy erected on existing hook or clamp

with earthing. [Make shall be approved by Engineer in charge] [5-

47 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 6.00 Mtr. 126.25

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing. [5-2-1]

48 Supplying & erecting fan hook box of 10 mm M.S. round bar 4.00 Ea. 126.25

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Total of Electrification Work

Total Amount (Civil + Electrification Work) TOTAL Rs.

Total Amount (Civil + Electrification Work) TOTAL Rs.

i.e. Rupees Twenty Two Lakh(s) Thirteen Thousand Eight Hundred Eighteen And Paise Thirty Four Only

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

DAHOD R&B Deptt. Godhra

Divisional Account Officer

Panchayat (R & B) Division Executive Engineer Executive Engineer

DAHOD Godhra Electrical Division Panchayat (R & B) Division