REPAIR AND REPLACEMENT OF EXISTING CONVENTIONAL MH/SV/HPSV STREET LIGHT FITTINGS CONVERTED INTO LED LIGHT, HIGH MAST LIGHTS, FLOOD LIGHTS, TIMER SWITCHES AND CONNECTED ITEMS AT MILITARY STATION KANCHRAPARA UNDER GE BARRACKPORE

Amount

Excavation in trenches for laying under ground cable, erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed.

Excavation in trenches for laying under ground cable, erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide, exceeding 1.5 meter but not exceeding 3m deep and getting out complete all as specified and directed.

Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil complete all as specified and directed.

Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation for stay set /Pole etc, filling and mass concrete including necessary form work as required complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as coping around pole including necessary form work, finished even and smooth without using extra cement complete as specified and directed.

S&F for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified conforming to IS- 2317/1980 type 410 SP-31 (9 metres long) complete with cast iron base plate including staying the poles in a truly vertical position till the foundations are properly set, including painting to pole (inside & outside) with two coats of aluminium paint on exposed surfaces of poles and two coat of black bituminous paint on embedded portion including taking down old unserviceable pole of any description complete all as specified and directed. (Note: Excavation, foundation concrete and coping will be measured and paid separately)

Supply, fixing and stretching ACSR conductor of any size and type for overhead LT poles including binding at site to insulator with suitable size of binding wire etc after and including taking down old unserviceable ACSR conductor of any size and length at any position from LT poles complete all as specified and directed.

S&F for shackle type insulator porcelain vitreous white, brown or green 1100 volts grade pressure, 115mm dia, 100mm high including galvanised strip of size 31X5 mm, 14mm dia insulators bolts, nuts and washers after and including taking down existing cracked/unserviceable shackle type insulator complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6 mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45X 45X 45 CM, RCC cover (1:2:4) type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply, fabricated and fixing of street light bracket made out of 32mm dia light grade, GI pipe 1.5 Mtr long, bent to shape as directed including clamps made out of 40 mm x 6 mm flat iron for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide primer after and including dismantling of old unserviceable one complete all as specified and directed.

S&F for 1 x 45 watt, LED street light fittings, powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, high/low voltage cut off after and including removing of old unserviceable fittings complete all as specified and directed. (Make : Havells Cat No. 45WLED757SASYTOPC/CG Cat No LSTP-45-CDL as approved)

S&F for 1 x 60 watt, LED street light fittings, powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, high/low voltage cut off after and including removing of old unserviceable fittings complete all as specified and directed. (Make : Crompton Greaves Cat No. LSTP-60-CDL/Havells Cat No. 60 WLED757SASYTOPC as approved)

S&F for 1 x 150 watt, LED street light fittings, powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, high/low voltage cut off after and including removing of old unserviceable fittings complete all as specified and directed. (Make : Havells Cat No. ENDURAPULSENSL150WLED757PASYBOTG/ CG Cat No LSTN1-150-CDL-A as approved)

S&F for 1 x 200 watt, LED flood light fittings, powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, high/low voltage cut off and including removing of old unserviceable fittings complete all as specified and directed. (Make:-Crompton cat ref No.LFLPI-200-CDL/60 / HAVELLS CAT NO. JETAIRISPLUSFLS200WLED757PSYMLTG as approved)

S&F for 1 x 250 watt, LED flood light fittings, powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, high/low voltage cut off after and including removing of old unserviceable fittings complete all as specified and directed. (Make:-Crompton cat ref No.LSFO-250-CDL/60 / HAVELLS CAT NO. JETAIRISPLUSFLS250WLED757PSYMLTG as approved)

S&F for junction box, water proof, outdoor type made out of external dimensions 400mmX300mmX190mm single door type hinged with locking arrangement front operated with one number MCB of 15 Amps capacity for housing 3 phase and neutral bus bar including connecting the incoming/out going cables glands SMC quoted clamps, bolts etc all and fixed to the steel tubular poles/PCC poles with mild steel flat of size 25mm X 4mm after and including removing of old unserviceable fittings complete all as specified and directed. (Make: Sintex Cat No. GSJB 4030 or equivalent of Hensel as approved)

S&F for 70/80 watt high power LED flood light with pressure die cast alumnium housing, complete with all connected accessories for fixing on poles with suitable size of clamps, nut bolts, washers after and including removing of old unserviceable fittings complete all as specified and directed. (Make: CG Cat No.LFL-80-CDL/60/ Havells Cat No.JETAFLAREFL70WLED757LTG as approved)

S&F for 150 watt high power LED flood light with pressure die cast alumnium housing, complete with all connected accessories for fixing on poles with suitable size of clamps, nut bolts, washers after and including removing of old unserviceable fittings complete all as specified and directed. complete all as specified and directed. (Make: CG Cat No.LFLN-150-CDL/60/ Havells Cat No. JETAIRISFLS150WLED757PSYMLTG as approved)

S&F for PVC multi stranded PVC copper cable, twin core of size 1.5 sqmm for connection from junction box/conductor to street light/security light fittings after and including taking down old unserviceable wire complete all as specified and directed.

S&F as in repair analog time switch, 3 module suitable for control of street light complete all as specified and directed. (Make: L&T Cat No. AUTS03ANA00/Legrand Cat No. 4128 13 as approved)

S&F as in repair MCCB, 100 Amps, 4 pole, 415 Volts , AC,50 HZ, 36KA thermal magnetic type with necessary lugs, thimbles, nuts bolts and washers and including removing old unserviceable item from existing location complete all as specified and as directed. (Make:- Legrand cat No. 4200 95 / L&T Cat No. CM92108OOL1OG as approved by GE)

S&F for outdoor drivers for street light 1X45 watt existing on ground after and including removing of old unserviceable one complete all as specified and directed. (Make:CG /Havells as approved)

S&F for outdoor drivers for street light 1X60watt after and including removing of old unserviceable one complete all as specified and directed. (Make:CG /Havells as approved)

S&F for outdoor drivers for street light 1X150watt after and including removing of old unserviceable one complete all as specified and directed. (Make:CG /Havells as approved)

S&F for LED surge protecting devices for street light upto 75 watt after and including removing of old unserviceable one complete all as specified and directed. (Make:CG /Havells as approved)

S&F for LED surge protecting devices for street light above 75 watt and upto 150 watt after and including removing of old unserviceable one complete all as specified and directed. (Make:CG /Havells as approved)

SENCO

INDUSTRIAL CONSTRUCTION

S S ENTERPRISE

PUNAM ENTERPRISE

M/S RAJESH TRADING CO

SWASTI ENTERPRISES