SMART MAINTENANCE TO INCLUDE REPAIRS TO LEAKAGE SEEPAGE TO SUNKEN PORTION TOILET BATHROOM PLUMBING WORK ROOF TREATMENT AND TANK CLEANING IN INTERNAL BLDG IN PBOR MD ACCN UNDER THE AREA OF AGE BR I ARMY CENTRAL IN ARMY AREA JODHPUR (8938/E8)

Amount

Demolition of cement concrete (un -reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) ,complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for 40mm thick cement concrete as in flooring type B-1 1:2:4 (using 20mm crushed stone aggregate) finished even and smooth without using extra cement complete all as spacified and as directed.

Supply only35mm wide 3mm thick glass dividing strips.

M&L 50 mm thick PCC (1:3:6) type C1 usig 20mm gradde aggregate as in plinth protection finished complete including forming joints in 2 mtr intervals and filled with bitumen mastics all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors,aprons/wall etc. laid, bedded and pointed in any mortar complete all as specified and directed.

Taking down cement plaster of any description on brick wall or stone masonary or concrete or RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface ,complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc

S&F wire netting galvanised steel wirecloth 0.91 nominal dia and 12 mm mesh lathing and fixed to ceiling including all gaps cutting and waste fixed with nails on ceiling complete all as specified and directed by engr-in-charge.

Material and Labour non skid coloured ceramic tiles 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:6 complete all as specified.

Material and Labour glazed coloured ceramic tiles 300 x 200 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement complete all as specified and directed.

Material and Labour glazed coloured ceramic tiles(ist quality) of size 350 x450 x 7 mm /350x250x7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement complete all as specified and directed.

M&L for joint free non skid colour ceramic tiles (ist quality)of size joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including complete all as specified and directed.& all as specified.

M&L for colour ceramic tiles (ist quality) of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for non-skid coloured ceremic tiles (ist quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Item no 17 above but skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick as in floor over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar.

M&L for 18- 20 mm thick Kota stone slabs as in skirting , risers of steps & other vertical surfaces etc including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for 15 to 20mm thick machine cut Udaipur green marble/granite (approved by users of any type work table rubbed and polished) as in cooking platform steps, jambs etc including laid over 15mm thick cement screed bed in CM (1:4) Including cutting and rubbing grinding and granite polish (Mirror image finish) complete as directed by Engr-in-Charge.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25 mm thick sand cushion complete. The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 300 Kg/Cm2.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge..

M&L for chequered cement concrete tiles 20x20x2.5/30x30x2.5 cm thick set and jointed in neat cement slurry in floor over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engg. In charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified.

Supply and fabricated of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening and fixing complete

Demolition of stone slabs laid dry jointed & pointed as in shelves, sunshades etc

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 35-45mm complete

M & L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed complete.

M&L preperartion of newly plastered surfaces of wall and applying three coat of white wash complete

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash complete

M&L preperartion of newly plastered surfaces of wall and applying two coat of putty with fair finished and even surface and applying two coat of oil bound distemper complete(including applying sand paper for finished the surface)

M&L preperartion of old plastered surfaces of wall and applying one coat of white wash complete

M&L Preparing of old plaster surfaces and applying one coat of oil bound distemper on wall complete all as specified and as directed.

Preparation of old surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coat of wall care putty to finished the surface and applying two coat of oil bound distemper complete all as specified and directed by engr-in-charge.

S&F MS with PVC coated decorative 25mm curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed.

Taking down or up steel / PVC tubing and connection including cleaning for refixing or removal to store for 25 mm dia.

All as per item No 37 above but 20 mm dia

All as per item No 37 above bu 15 mm dia

S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified for 25 mm dia,

All as per item No 38 above but 20 mm dia

All as per item No 38 above but15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Demolition Concrete(un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction complete all as specified and as directed. ( Note : WPC shall be measured and paid seperately)

Supply only water proofing compound

75mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates to use in subbase of floors of sunken portion laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green complete all as directed by the Engr- in -charge.

M&L for applying one coat of cold emulsion bitumenous primer @ .25kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5mm thick as specified above shall be laid by torch application method as per manufacturer instructions

PCC (1:5:10) lean cement concrete type E2 using 40mm graded stone aggregates in mass concrete after carrying out satisfactorly testing of CI pipes/PVC pipes joints and slab walls by filling water for 72 hrs ,sunken portion of nahani trap/floor trap and pipe joints shall be embeded in PCC 1:3:6 type C1 complete all as specified and directed..

S&F 32 mm dia bore light grade galvenised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoided chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe and other accessories etc all as specified and directed.

S & F as in repairs vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

M&L Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste fittings, waste pipe, MS brackets complete all as specified fixed in repair .

M&L Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste fittings, waste pipe, MS brackets complete all as specified fixed in repair .

S & F as in repair low level flusing cistern PVC 9-10 ltrs capacity with float valves white with inlet ball valve including float and includign pvc connection complete

Replacement of internal flushing cistern fitting (accessories kit) for low level. Make as per existing fitting all as specified and as directed.

S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia

S & F in repair 15mm size PVC connection with PTMT nuts 450mm length.

S & F as in repairs fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm dia bore pipe

S & F as in repairs long arm cp bib tap 15mm bore fancy type.

S & F as in repairs fancy type , chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe.

S&F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia all as specified specified.

S&F as in repairs of stop cock regular body with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia all as specified

S/F as in repairs of angle valve, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 15mm dia all as specified specified.

S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each (Make-PRAYAG or equivalent).

S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore.

S&F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 250 gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange.

M&LStainless steel sink 0.60 mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair.Make: Nirali/Bluestar/Jayana

S/F in repair stainles steel sink with drainage board 0.60 mm thick for kitchen ry, with plug, waste pipe, washers including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx 330mmx160mm. Make: Nirali/Bluestar/Jayana

S&F in repairs for Kitchen plate Rack made out of stainless steel 0.50 mm thick size 750x600x200 mm with partition complete all as specified. Make: Nirali/Bluestar/Jayana

Demolition of existing RCC tank on roof and removing from site of capacity exceeding 300 litr but n. exc. 500 litr and making good the distrub surface by providing 100mm thic platform of required size for water storage tank with PCC 1:2:4 type B1 using 20 mm graded stone aggregates over roof slab and finishing exposed cement concrete surface with 15mm thick plastering in cement mortar 1:4 and S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 500 ltrs including tank lid cover complete with fixing arrangementcomplete all as specified and directed.

Taking down & S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 500 ltrs including tank lid cover complete with fixing arrangement

Taking down and S&F white moulded polythylene water storage tank of 1000 Ltr capacity (cylindrical vertical with closed tap) hoisted and fixed in position all as specified and directed.

S & F ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms .

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place of capacity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed by E-in- Charge. ( Note :- Accessories damaged during the cleaning of tank shall be replaced by the contractor at his own arrangement and will not be paid by the department.)

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in- Charge for capacity exc 500 Ltrs but not exc 1000 Ltrs

Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc .

Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab complete all as specified and directed.

M&L for PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as in roof kerb including weathering, slightly rounded or chamfered angles and throating, as directed etc

M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm

S&F only PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr

S&F 15 mm bore bib taps, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats ( minium weight 300 gram, size 450x125x25mm) complete all as specified and directed.

S&F in repair health foucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve complete all as specified and as directed and approved by E in charge.

S&F in repairs plastic water closet seat cover white closed patteren with flat bottam and cover and mild steel chromium plated or aluminised hinges device PVC seat cover for water closet.

S&F of CP mild steel grating 125 mm dia as in repairs.

Taking down steel window/ventilator including guard bar.

S&F of steel ventilator top hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

S&F of steel ventilator top hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with or without cooler opening, dovetailed or welded all as specified.

All as per item No above but without glazing bars

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

Taking down of chowkats or frames w/o taking down shutters area n exc 1.50 Sqm

Taking down chowkats or frames with shutter ( without taking off shutter from frame) exc 1.5 Sqm but n exc 4 Sq .m each.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each.

S&F of 2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,

S&F 35 mm thick 2nd class hard wood factory made paneled door shutter ( two pannel) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated all as spacified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.Make Rajshree

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

S &F in repairs of stainless steel butt hinges 100 mm size.

S&F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F 100mm size single action door spring hinge complete

S/F of aluminium anodized,tower bolt 150 mm long

S&F aluminium anodised handle extruded section of size 150mm long

S&F of Aluminium alloy, anodised, sliding door bolt 16 mm dia & 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Particle board 18/19 mm exterior grade including knobs,hinges and wood scantling as in cup board complete all as specified

Hacking out old broken glass(any thickness,size quality or description)from metal frames including punching or drilling out old glazing pins &spring clips and provding & new ones complete.

S&F 3mm sheet glass ordinary quality and glazing with oil putty in squares not exc.0.50Sqm in each pane all as specified.

S& Fixed in repairs 4 mm thick figured glass panes pin headed type complete all as specified and directed.

S & F galvanised mild steel wire cloth of 0.40 mm nominal dia of wire and 1.20 mm average width of aperture fixed with tinned tacks or galvanised wire staples .

S&F in repairs for galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and 1.20 mm average width of aperature fixed with and including palin MS flat iron with galvanised wire stapples with and including necessary welding, nut bolt etc as in steel window or door complete all as specified and directed.

M&L for two coat of enamel paint( Ist quality) over a coat of red oxide primer on new steel surface including preparation of surface over 10Cm width or girth all as specified.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring jointsfixed on wall with MS clamp as per dierction of engineer in charge

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm complete

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm complete

All as per item No above but fixed in wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm

S&F PVC (SWR) bends any radius 110mm

S&F PVC (SWR) bends 75mm dia with oval acess door

S&F PVC SWR vent cowl 110mm

S&F PVC SWR vent cowl 75mm

S&F 75 mm PVC SWR junction (T) with acces door equal or unequal complete all as specified.

S&F 110mm PVC SWR junction (T) with acces door equal or unequal complete all as specified.

Demolition of Brick work , pcc block ,stone masonry built in cement mortar

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6

All as per item No 128 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition as per directon of Engineer -in -Charge .

M&L for PCC solid block 10 cm thick type B1 1:2:4 set in cement mortar 1:6 complete all as specified and directed.

S& F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 15/20mm dia bore pipe complete all as specified and directed.

Note for all above items:All items are fo r"Materials and labour /Supply and fix" and to be executed in "Repairs" incl taking down old materials only unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

M/s Vishnu Infrastructures