Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC 99 C PIPE ROAD CHINIAMORE PO BARRACKPORE PS TITAGARH DIST 24 PARGANAS N KOLKATA 700120 WB | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹21.6 L+₹62,614 (2.98%)Rejected-Finance | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹21.9 L+₹88,437 (4.22%)Rejected-Finance 72 5 53 PIPE ROAD PO BARRACKPORE DIST 24 PARGANAS NORTH PIN 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹22.3 L+₹1.3 L (6.05%)Rejected-Finance | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹22.4 L+₹1.4 L (6.91%)Rejected-Finance 71 A LOOTERY MAHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS N KOLKATA 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
5 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
REPAIR / REPLACEMENT OF PERIMETER LIGHTS, STREET LIGHTS, POST TOP LATERN, GARDEN LIGHTS AND ALLIED WORKS AT JAFFARPORE, KANCHARAPARA, BARASAT AND LOS DUM DUM UNDER GE (AF) BARRACKPORE
2024_MES_665997_1
8536/BKP/AF OF 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE AF Barrackpore
Class-E,
Category-b(i)
2 documents required · 2 mandatory
₹0
₹40,000
Yes
17 Oct 2024
15 Jul 2024
7 Sept 2024
15 Jul 2024
5 Sept 2024
29 Jul 2024
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth and getting out in soft/loose soil for laying of under ground cable including taking out old brick protection cover complete all as specified and as directed.complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed.
Removing excavated materials (soils) not exc. 50.00 m and depositing where directed at a level not exc. 1.50 m above from starting point complete all as specified and directed.
Trimming and cutting of tree branches along street light pole providing space from the tree branches and removing the cut branches out of side complete all as specified and as directed.
Materials and labour for cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer including dismantling of undersize / defected cross arms of M.S. channel or angle of any sections complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C-2 (using 40 mm grade stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base of floor and paving etc and finished the surface even and smooth including demolition of existing cement concrete (unreinforced) and removal of rubbish from the site complete all as specified and directed.
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 25 Sqmm, 4 core, 1100 Volts grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs including taking down old unserviciable existing cable complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
All as per above Item No 8.00 but size of 16 Sqmm 4 core and -ditto-.
All as per above Item No 8.00 but size of 10 Sqmm 4 core and -ditto-.
Material and labour for sand cushioning with clean and dry river sand for protection of PVC cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and as directed. Note:- Punned down thickness shall be measured for payment.
Materials and labour for brick protection cover to underground cables with sub class ‘B’ bricks of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat putting each other with gaps not exceeding 10mm complete all as specified and as directed.
Material and labour for cutting the road/hard standing and making good disturbed surfaces by using PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) for laying pipe complete all as specified and directed.
Supply and fix in repair 50mm bore GI pipe (light grade) with all fittings for protection of cables to cross under road, hard standing, pavement etc complete all as specified and as directed.
Materials and labour for complete removal of existing treatment of old steel surfaces of LT panel board / feeder pillar box / AMF panel etc and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer including preperation of surface with spray gun complete all as specified and directed.
Supply and fix in repair PVC insulated copper cable of 1.5 sqmm, 3 core multi strand copper conductor for connection of security light from junction box complete all as specified and directed.
Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" seriescomplete all as specified and directed.
Supply and fix as in repair cable junction box 250x200x105mm in size, for suitable existing cable size, made out of thermoplastic sheet having IP-66 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 - 2 nos) fixed on poles with flat iron clamps of size 25x3mm, nuts, bolts, washers etc. complete all as specified and directed.
Supply and fix in repair street light bracket made of 1.5 RM length of GI pipe of medium grade of 32 mm dia in proper shaped, bend, threaded and drilling holes for wire entry and MS clamps (02 Nos) of suitable size in proper shape cmplete all as specified and directed.
Supply and fix in repair LED street light fitting 60 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt and LM9 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device and 10 KV surge protection device in luminare, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed / engraved on the LED fitting for traceability till life. Warranty should be 2 years and waranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Supply and fix in repair LED street light fitting 70 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt and LM9 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with 4KV surge protection device and 10 KV surge protection device in luminare, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Supply and fix in repair rectangular LED flood light fitting 180 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficacy > 110/120 LPW, with inbuilt 4KV surge protection device and 10 KV surge protection device in luminare and LM9 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Supply and fix in repair LED street light fitting 35 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt and LM9 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Supply and fix in repair 10W warm white LED Bollard Light fittings made of pressure die cast aluminium housing with inverted pyramid tripod type diffuser with 360 degree soft light distribution, IP65 protection, high power LEDs and system efficacy should be greater than 100 Lumen per watt and LM79 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device. THD shall be <10%, Power Factor >0.95, CCT 3000K and brand name should be embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Supply and fix in repair Post top lantern LED type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete incl system efficiency should be greater than 100 lumen per watt and LM9 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4 KV surge protection device, THD shall be <10%, power factor >.95, CCT >5700K and brand name should embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letter head at the time of delivery complete all as specified and directed.
Material and labour for lowering of high mast lantern carriage and servicing, greasing of double winch drum & stainless steel wire rope of dia 6mm with complete overhauling of overhead assembly and ckecking servicibilty by lifiting up and down of lantern carriage and level the existing height after completing the job complete all as specified and directed.
Material and labour for disconnecting of motor upto 5 HP of high mast pole, rewinding with suitable copper guage overhauling complete and refixing the motor after repairing complete all as specified and directed
Material and labour for loop digging of the exisiting cable, remove the burnt cable and after dressing the cable fixing with proper lugs and connecting to the junction box/LT feeder piller complete all as specified and directed.
Supply and fix steel tubular swaged poles, type 410 SP 31 (overall length 9.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coats of black bituminous paint throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer, painting black & yellow alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint, numbering of poles including taking down old unserviciable existing pole complete all as specified and directed. Note: Excavation and earth work and PCC shall be measured and paid separately under respective items.
Supply and fix in repair 25mm bore HDPE pipe suitable for 10 Kg/sqcm working pressure for passing of cable through PCC foundation from trench to cable junction box and also protection of security light cable from junction box to light fitting with necessary clamp nuts and bolts complete all as specified and directed.
Supply fix in repair 10 KV surge protection device, 440 Volt for LED flood light and street light luminare of different wattage capacity complete all as specified and directed
Supply and fix in repair driver suitable for 36 watt LED street light complete all as specified and directed.
Supply and fix in repair driver suitable for 45 watt LED street light complete all as specified and directed.
Supply and fix in repair driver suitable for 60 watt LED street light complete all as specified and directed.
Supply and fix in repair driver suitable for 150/200 watt LED flood light complete all as specified and directed.
Supply and fix in repair automatic street light switch 5KW, 3 phase using NATURE SWITCH (using Infrared Sensor techonology) for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) alongwith 3 power contactor, 03 Nos incoming MCBs and 03 Nos outgoing MCBs of 16-20 Amps each and circuit wiring (copper) of min 10 Sqmm,support terminals block with suitable enclosure on pole/wall fixed with ms clamp 25x3mm with bolts, nuts as required at site mountable enclosure made of rust proof, electric shock proof, terminate proof and FR grade thermoplastic polycarbonate enclosure (with hinged lid) conforming to IP-66 protection class 2 complete as specified and directed. Note :- (a) Price is inclusive of sensor, contractor, incoming outgoing MCBs and enclosure etc as complete set. (b) SS nut bolts, clamp for fixing on pole/wall are to be included in the quoted rates. (c) The sensor must have the warranty of min 2 years. (d) The test certificate and warranty ceritificate must be provided from OEM by contractor.
Materials and labour for complete removal of existing treatement and painting to LT electrical pole, steel tubular swaged pole (9 meter long) of any size, any pattern including nut bolts, clamps and channels with two coats of aluminum paints over a coat of red oxide primer, painting black & yellow alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint including numbering of poles after preperation of surfaces complete all as specified and directed.
Oenix and associates (BID ID -3084617)
PIONEER (BID ID -3084718)
APOLLO TRADERS (BID ID -3084690)
KUMAR ENTERPRISE (BID ID -3084945)
P.J. AND CO. (BID ID -3084203)
M/S. B. N. CHATTERJEE (BID ID -3084978)
KAMAL ENGINEERING (BID ID -3086369)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .