Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹20.0 L
EMD Value
₹20,000
Closing Date
27 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Execurive Engineer Panchayat R&B Division Bharuch
MUKYA MANTRI HALPATI UTKARS YOJANA 2023-24 (1) Constructing Aanganwadi buildings at Village Sachan Taluka Vagra Dist. Bharuch(2)Constructing Aanganwadi buildings at Village Tankariya-1 Taluka Dist. Bharuch
263216
39/2025-26 (2nd Attempt)
Open
Civil - All
Fixed-rate
Bharuch
5 documents required · 5 mandatory
₹900
Yes
Executive Engineer Panchayat R&B Division Bharuch
₹20,000
Yes
13 Jan 2026
13 Jan 2026
13 Jan 2026
27 Jan 2026
13 Jan 2026
No. figures Amount
1 Boring of holes 3.0 mt. deep in ordinary soil (for cast in situ piles) and 38.00 Each 1587.19
getting out the oil and disposal of the surplus excavated soil as
directed with in lead of 50 mt. for following dia. of piles and for under
reamed piles of following diameter and deduct from the rate for bore
holes of 3.5 mt. depth, if bore holes are made deeper or shallower
than 3.5 m. for piles of following diameter (A) 300mm dia.
2 Boring of holes 2.50 mt. deep in ordinary soil (for cast in situ piles) 18.00 Each 1304.95
and getting out the oil and disposal of the surplus excavated soil as
directed with in lead of 50 mt. for following dia. of piles and for under
reamed piles of following diameter and deduct from the rate for bore
holes of 3.5 mt. depth, if bore holes are made deeper or shallower
than 3.5 m. for piles of following diameter (B) 250mm dia.
3 Providing and laying cement concrete 1:4:8 (1- cement : 4 coarse 15.20 Cum 2651.18
sand : 8 hand broken stone aggregates 40 mm nominal size) and
curing complete excluding cost of formwork in Foundation and Plinth.
4 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 13.00 Cum 3481.28
coarse sand : 4 graded stone aggregates 20 mm nominal size) and
curing etc. complete excluding the cost of formwork in foundation and
5 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 9.00 Cum 11775.49
coarse sand : 4 graded stone aggregates 20 mm nominal size) and
finishing smooth with curing etc. complete including the cost of
formwork but excluding the cost of reinforcement for R.C.C. work in
Columns having any cross sectional area.
6 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 16.60 Cum 8593.80
coarse sand : 4 graded stone aggregates 20 mm nominal size) and
finishing smooth with curing etc. complete including the cost of
formwork but excluding the cost of reinforcement for R.C.C. work in
Beams having any cross sectional area.
7 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 0.60 Cum 10219.39
coarse sand : 4 graded stone aggregates 20 mm nominal size) for
RCC Lintel including finishing smooth with curing etc. complete
including the cost of formwork but excluding the cost of reinforcement.
8 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 11.00 Cum 6888.15
coarse sand : 4 graded stone aggregates 20 mm nominal size) and
exposed work with curing etc. complete including the cost of formwork
but excluding the cost of reinforcement for R.C.C. work in Slabs
having any thickness.
9 Providing and laying brick work using common burnt clay building 31.00 Cum 4021.02
conventional type bricks having crushing strength not less than
kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement
: 6 -fine sand) including the cost of all materials and labour charges
etc. complete.
20cm. thickness including watering, ramming and consolidating etc.
completed.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
11 Providing and laying brick work using common burnt clay building 35.20 Cum 4061.51
conventional type bricks having crushing strength not less than
kg./Sq.cm. in Super structure in Cement Mortar 1:6 (1- Cement : 6 -
fine sand) including the cost of all materials and labour charges etc.
12 Providing I.S.I. mark T.M.T. Bar Fe-415 reinforcement for R.C.C. work 4584.00 Kg. 67.26
including bending, binding and placing in position complete upto floor
two level.
13 Providing and fixing steel door with shutter frame iron angle, 18mm 11.60 Sq.m. 1965.46
steel plate with iron oxidized hinges handle, stopper, locking
arrangements including welding, cutting, hoisting fixing in position oil
painting two coats primer coat etc. complete for Door.
14 Providing and fixing steel window with shutter frame 50 x 50 x 6 mm 16.60 Sq.m. 3212.81
iron angle, 18mm steel plate with 10mm dia. round bars hinges,
handle, stopper, locking arrangements etc. steel work welded built up
section cutting, hoisting fixing in position oil painting two coats one
primer coat etc. complete for Windows.
15 20mm thick sand faced cement plaster on wall upto height 10 mt. 231.20 Sq.m. 329.29
above ground level consisting of 12mm thick backing coat of C.M. 1:3
(1 cement : 3 sand) and 8 mm thick finishing coat of C.M. 1:1 (1
cement : 1 sand) etc. complete.
16 Providing 15mm thick cement plaster in single coat on brick / concrete 441.60 Sq.m. 160.04
wall for interior plastering upto floor two level finished even and
smooth in cement mortar 1:3 (1-Cement : 3-sand) for finishing with a
floating coat of neat cement slurry.
17 Providing 10mm thick cement plaster in single coat on brick / concrete 91.20 Sq.m. 213.18
wall for interior plastering upto floor two level finished even and
smooth in cement mortar 1:3 (1-Cement : 3-sand) for ceiling.
18 Providing and laying vitrified tiles 8mm to 10 mm thick, 24" x 24" in 90.60 Sq.m. 1073.13
flooring, treads of steps and landing laid on a bed of 12 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush
pointing in white cement.
19 Distempering (two coats) with oil bound distemper of approved brand 392.80 Sq.m. 112.49
and manufacture and of required shade on wall surfaces to give an
even shade, over and including a priming coat with alkali resistance
primer of approved brand and manufacture after thoroughly brushing
the surface and other foreign matter and also including preparing the
surface even and sand papered smooth including applying two coats
of Birla or Asian lappy putty & two coats of primer of approved brand
and manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth.
20 Finishing wall with water proofing cement paint on wall surfaces (three 231.20 Sq.m. 89.58
coats) to give an approved brand and manufacture and of required
shape even shade after thoroughly brushing the surface to remove all
dirt, dust and remains of loose powdered materials.
21 Providing and laying half brick masonary in common burnt clay 21.80 Sq.m. 631.02
building conventional type bricks having crushing strength not less
than 35 Kg/Sq.cm. in cement mortar 1:5 (1 cement : 5 coarse sand) in
foundation and plinth including the cost of all materials and labour
charges etc. complete.
22 Providing and fixing wash basin with single hole for pillar tap with C.I. 2.00 No. 1382.37
or M.S. brackets painted white including sutting holes and making
good the same but excluding fittings (A) Vitreous china (ii) flat back
wash basin 550 mm x 400mm size.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
23 Providing and fixing water closet squatting pan (Indian type W.C. Pan) 2.00 No. 948.09
size 580mm (Earthwork, bed concrete, foot reste and trap to be
measured and paid for separately) vitreous china (i) long pattern in
white colour.
24 Providing and fixing 100mm size P or S trap for water closet squatting 2.00 No. 329.29
pan including jointing the trap with the pan and soil pipe in cement
Mortar 1:1 (1-Cement : 1-Fine sand) (A) Vitreous china.
25 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted 2.00 No. 2280.17
white including cutting holes in walls and making good the same but
excluding fittings (C) Vitreous china sink (i) 600mm x 450mm x
150mm size.
26 Providing sock pit of 5.00 Cu.M. Volume including excavating and 4.00 No. 3372.19
filling brickbats with dry masonry work at top for 45cm. height
including covering the top with stone including providing vatas in C.M.
1:3 with finishing, curing etc. complete as directed.
27 Constructing brick masonary road gully chamber 500mm x 450mm x 4.00 No. 2017.19
600mm including 500mm x 450mm C.I. horizontal grating with frame
28 Constructing a cooking platform 60 cm. width and 70 cm height 4.20 Rmt. 2694.77
resting on B.B.Masonry walls 23 cm. thick in C.M.(1:6) with fixing or
precast RCC 1:2:4, 8 cm thick slab with marble chips set in C.M. 1:6
(6mm thick terrazo) with plastering on exposed faces of wall in C.M.
1:4 etc. complete
29 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 40.00 Rmt. 80.17
pressure polythene pipes of the following outside dia. low density
complete with special flange compression type fittings, wall clips etc.
including making good the wall ceiling and floor. (A) 20mm dia.
30 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 30.00 Rmt. 102.93
pressure polythene pipes of the following outside dia. low density
complete with special flange compression type fittings, wall clips etc.
including making good the wall ceiling and floor. (B) 25mm dia.
31 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 30.00 Rmt. 118.99
pressure polythene pipes of the following outside dia. low density
complete with special flange compression type fittings, wall clips etc.
including making good the wall ceiling and floor. (C) 32mm dia.
32 Providing and fixing cast iron (spun) Nahni trap of the following 10.00 No. 615.63
nominal diameter of self cleaning design with C.I. screwed down or
hinged grating including cost of cutting and making good the walls and
floor 100mm inlet and 50mm outlet.
33 Providing and fixing screw down bib taps of following size. (A) Brass 10.00 No. 186.79
screw down bib tap polished bright. (i) 15mm dia.
34 Providing and fixing gun metal check or non return fullway wheel valve 10.00 No. 186.83
(i) 15mm dia.
35 Providing and fixing PVC Water tank ISI mark Sintex or equivalent as 2000.00 Liter 3.95
36 Providing and laying (to level or slopes) and jointing with stiff mixture 20.00 Rmt. 518.84
of cement mortar in proportion 1:1, salt glazed stoneware pipes
including testing of pipes and joints complete including providing and
laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40mm nominal size) bedding for stoneware pipes of
following internal diameters with necessary formwork and curing
complete (B) 150mm dia. (166mm avg. bed thickness).
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
37 Providing and fixing on wall face PVC rain water pipe 110mm dia. & 4 28.00 Rmt. 232.70
kg/sqm. is used including fitting the joints with approved brand.
38 Providing and laying white glazed tiles 6mm thick in flooring treads of 29.60 Sq.m. 957.63
steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand) finishing with flush pointing in white cement.
39 Providing and fixing 25mm thick shutters for cupboards etc. including 26.40 Sq.m. 3064.44
anodized alluminium butt hinges with necessary screws (A) Indian
teak wood (i) Fully panelled.
40 Providing and fixing chrominum plated brass half turn flush cock of 2.00 No. 263.77
approved quality including fixing in pipe line etc. complete (ii) 25mm
41 Providing and fixing 100mm dia. PVC spigot and socket soil waste 20.00 Rmt. 218.16
and ventilating pipe including fitting joints in lead or rubber base water
proofing solution and fixing with clamps as directed etc. making the
walls good etc. as directed.
42 Providing and fixing in position PVC cowl vent of 100mm dia. pipes. 4.00 No. 72.72
43 Providing and fixing 600mm x 450mm bevelled edge mirror of 2.00 No. 833.73
superior glass mounted on 6mm thick A.C. sheet or plywood sheet
and fixing to wooden plug with C.P. brass screws and washers.
44 Providing and fixing C.P. brass waste for wash basin or sink (A) 4.00 No. 67.91
45 Providing and fixing fisher union for wash basin (A) 32mm dia. 4.00 No. 78.75
46 Providing and laying broken china mosaic flooring for terrace using 99.20 Sq.m. 747.29
12mm to 20mm broken pieces of glazed tiles to be laid over cement
mortar 1:3 to plain or slope and to be tempered to bring mortar creme
out up to surface using white cement including rounding off junctions
and extending them up to 15 cm along the wall, clearing with water
and oxalic acid etc. as directed.
47 Providing and fixing ball cock as directed by Engineer in charge (A) 2.00 No. 132.89
Copper metal (i) 25 mm dia.
48 Providing and fixing polished kota stone slab 25mm thick for shelves 16.40 Sq.m. 200.29
as directed.
49 Filling in plinth with sand under floors including watering, ramming, 6.00 Cum 460.19
consolidating and dressing etc. complete.
50 Providing and fixing a board showing "Aanganwadi" of size 0.60 x 2.00 No. 2908.80
0.30 mt. including painting Gujarati Language as directed.
51 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and 16.00 Cum 954.75
getting out the soil and disposal of the surplus excavated soil as
directed within a lead of 50 Meter for following diameter of pipes.(iii)
52 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse 1.00 Cum 3816.45
sand : 6- crushed stone aggregates 20 mm nominal size) and curing
complete including cost of formwork in (A) Wall Caps / Coping.
53 Providing and fixing precast Rubber Dye / steel Dye inter locking 66.00 Sq.m. 685.42
concrete block 60mm thick with grade of concrete M-300 pneumatic
compressed / vibrated mechanically and as per approved design
confirming to IS 15658 : 2006 including 35 mm sand layer for levelling
and filling the joint with sand in proper line and level as per guidelines
of IRC : SP 63-2018 etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
54 Colour washing with lime on wall surface (three coast) over and 140.00 Sq.m. 17.66
including a primer coat of white washing to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and other foreign matter.
55 Measured Around Us Scales - Horizontally and Vertically : Vertically 2.00 No. 327.24
Scales painted on the wall 15 cm. wide and length 3 mtr. on existing
wall surfaces with single coat including priming on existing wall
surface and ceiling.
56 Symmetry Around Us : Symmetrical shapes (like round, square etc.) 4.80 Sq.m. 327.24
with Revealing part of whole images (Painting on door or window
surface) including painting whole door & windows with finishing etc.
57 Colour Treasures :- Painting colour teasures on existing metal surface 2.00 No. 232.70
like fan colour wheel, metalic fan blades (each is a circle with dia.
cm approx.) with metal primer and enamel matt paint with all
necessary finishing etc. complete.
58 Map Your World :- Mapping the Neighbourhood / Village / Mapping 18.00 Sq.m. 727.20
the City / District / State / Mapping the Country / Mapping the World /
Me and my world painting (1.5 mtr. dia.) on existing wall surface and
print on plastered wall surface with cement primer and enamel (matt
paint) etc.
59 Time Devices : Making Clock with MS arms and writing surface, 60 2.00 No. 552.67
cm in diameter by making new chalk board surface on existing
masonry wall with 1:6 (1 cement : 6 sand) in two coats and finished
coat with 1:2 cement marble stone dust and painting on this surface
with providing and fixing hands of the wall clock with MS flat (0.4 cm
thick and 2 cm wide) and MS flat (0.4 cm thick and 1 cm wide) with
galvanised steel bolts and washers with painting clock dial and hands
including all necessary surface preparation etc. complete.
60 Number Lines : (A) Number Line Caterpillar / Number Line Train 4.50 Sq.m. 596.30
Number / Number Line in a row of Children on existing walls surface
as per approved drawing and design etc. complete.
61 Abacus as a Built Element : Making Hoop Abacus set for classroom 2.00 Set 4944.96
on wall (Different length for different classes) as per approved drawing
and design etc. complete.
62 Prewriting Patterns on Window Grills as per approved drawing and 1.08 Sq.m. 4654.08
design etc. complete.
63 Prewriting Patterns on Wall surfaces by making new chalkboard 1.44 Sq.m. 741.74
surface on existing masonry wall with 1:6 (1 cement : 6 sand) in two
coats and finished coat with 1:2 cement marble stone dust with
painting and printing on new chalkboard wall surface and ceiling.
64 Writing and Displaying Surfaces / New Chalkboard : Providing writing 14.40 Sq.m. 138.17
and displaying surfaces on existing walls / Chalkboard by painting on
existing wall surface etc. complete.
65 Play with words : Making World wall with Alphabet border by making 1.92 Sq.m. 785.38
60 x 140 cm writing surface on wall with 10 cm wide border including
making new chalkboard surface 1:6 (1 cement : 6 sand) in two coats
and finished coat with 1:2 with cement marble stone dust with painting
66 Dot Boards on floor and walls :- Making DOT Board & GRID Board on 8.82 Sq.m. 363.60
floor and walls with painting and painting dots in straight rows, dots
staggered in straight rows on existing wall surface and ceiling as per
approved drawing and design etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
67 Grid Boards : Provide a Floor Grid Boards of size 60cm x 60cm with 4.42 Sq.m. 333.30
1:2:4 P.C.C. flooring with glass / PVC strips as per approved drawing
and design etc. complete.
68 Board games on floor : Making Indigenous Board Games / Flat Dice 2.16 Sq.m. 399.96
like Sapaat Pasa with necessary smooth floor finish as per drawing
etc. complete.
69 Magic squares on floor and walls : Providing magic squares on floors 1.22 Sq.m. 727.20
and walls with 3 x 3 Magic Square / 4 x 4 Magic Square by making
new chalk board on existing masonry wall 1:6 (1 cement : 6 sand) in
two coats and finished coat with 1:2 with cement marble stone dust
and than making painting.
70 Cubby Holes and Peep Holes on walls : Making cubbyholes with 2.30 Sq.m. 1236.24
bricks in the existing low heights walls with necessary finishing etc.
complete as per design.
71 Periscope : 2 - For Ground floor building periscope provided with 1.00 2.00 No. 1454.40
mt. clear height with 15 cm dia. PVC pipe including fixing with
elbows at top and bottom with transparent glass including all
necessary fixing with making necessary holes and finishing it etc.
72 Providing and fixing PIN UP BOARD with necessary base fitting as 3.00 Sq.m. 727.20
per given drawing etc. complete.
73 Pipe phone : Making pipe phone by providing B class MS pipe of 8.00 Rmt. 421.78
50mm dia. and necessary length with existing ramp including all fixing
and finishing etc. complete.
74 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.0 sq. mm & 26.00 Pt. 150.00
earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC
insulated multistrand copper wires in existing pipe duly erected,
complete with 6A Tissino Type ISI marked flush type switch / bell
push and accessories erected on polished wooden block / metal /
PVC box covered with 3 mm thick laminated sheet (PVC Copper
Wire, Avocab, Finolex, RR Cable brand only) and (Electrical
accessories i.e. Switches etc. CLIPSAL, MK, ANCHOR, TOYOMA
brand only) for concealed wiring. Light / Fan / Bell.
75 Point wiring for Independent PLUG Point with 2-1.0 sq. mm & 4.00 Pt. 173.00
earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC
insulated multistrand copper wires in existing pipe duly erected,
complete with ISI marked 3 pin 6A socket and 6A Tissino Type switch
erected with earth continuity connection erected on polished board
block / metal / PVC box covered with 3 mm thick laminated sheet
(PVC Copper Wire, Avocab, Finolex, RR Cable brand only) and
(Electrical accessories i.e. Switches etc. CLIPSAL, MK, ANCHOR,
TOYOMA brand only) for concealed wiring.
76 Point wiring for looped PLUG point with complete with ISI marked 3 6.00 Pt. 35.00
pin 6A, socket and 6A tissino type ISI marked flush type single pole
switch erected with earth continuity connection erected on polished
wooden block /Metal/ PVC Box covered with 3 mm thick laminated
sheet for open / concealed wiring.
77 Mains with 1.1 KV grade FRPVC insulated ISI marked stranded 100.00 Rmt. 24.00
Copper conductor wire in existing pipe erected with 1.5 sq.mm copper
conductor FR PVC insulated stranded wire of green colour for earth
continuity of following size (PVC Copper Wire, Avocab, Finolex, RR
Cable brand only) (a) 2 wire 1.5 sq. mm.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
78 Mains with 1.1 KV grade FR PVC insulated ISI marked stranded 80.00 Rmt. 31.00
Copper conductor wire in existing pipe erected with 1.5 sq.mm copper
conductor FR PVC insulated stranded wire of green colour for earth
continuity of following size (PVC Copper Wire, Avocab, Finolex, RR
Cable brand only) (b) 2 wire 2.5 sq.mm.
79 Providing and erecting PVC casing patty conforming to ISS complete 100.00 Rmt. 25.00
erected with necessary fitting with adhesive solution (i) for open
execution.
80 Providing and erecting PVC corrugated flexibal conduct with require 4.00 Rmt. 13.00
nos. of coupling, PVC bushes, check nuts etc. complete of following
size 20mm.
81 Providing & erecting PVC corrugated flexibal conduct with require nos. 4.00 Rmt. 17.00
of coupling, PVC bushes, check nuts etc. complete of following size
82 Backlite lamp holder. 16.00 No. 15.00
83 Electric Hum Free EME Socket type steps Fan Regulator. 4.00 No. 190.00
84 Providing & erecting Bulk head fitting with glass wire guard rubber 4.00 No. 39.00
gasket & porcelain holder suitable for 40 watt to 100 Watt lamp
suitable conduct entry to be erected as directed.
85 Supplying and erected approved make 1 x 40 watt. white stove 8.00 No. 347.00
enameled patti type type fluorescent fitting made of M.S. 0.8 mm thick
white on reflector side complete with heavy duty polyester copper
wound balast, lock type tube, starter, duly wired for use on 250 V. A.C.
supply and erected if required on varnish P.W. block / PVC block with
lead wires & connection. Cat-III (CLIPSAL, PIERLITE, PHILIPS,
CROMPTON brand only) (a) Suitable for 1 tube 40 watt. 120 mt. Cat.
86 Approved make G.F. lamp 230 / 250 V. 40/60 Watt Cat-III. 12.00 No. 14.00
87 Approved make fluorescent tube 120 cms 36/40 Watt erected, if 8.00 No. 61.00
required. Cat-III.
88 Providing & erecting decorative call bell Ting-Tong box type 250 V. 2.00 No. 60.00
complete erected on existing polished wooden block or 3 mm thick
laminated sheet.
89 Providing & erecting approved make ceiling fan with condenser A.C. 4.00 No. 1323.00
230 V. 50 Cys. 1200 mm sweep complete, canopy, regulator and
cms. Dowen rod erected on existing hook or clamp with 24/0.2 flat
core flexible wire with earthing with out regulator.
90 Supplying and erecting fan hook box of 10 mm M.S. Round bar 4.00 No. 33.00
grouted in RCC slab with making the site as original.
91 Providing & erecting 240 V. MCB double pole motor & including load 2.00 No. 337.00
(C curve) having 10 KA breaking capacity & conforms to IS:8828 in
existing box having following capacity. 40 Amp. Cat-II.
92 Providing & erecting sheet steel powder coated enclosure suitable for 2.00 No. 132.00
incorporating one / two nos. MCB (A) DP MCB.
93 For using salt and charcoal / coke as required for pipe type earthing. 2.00 No. 127.00
94 Cast iron earth plate size 30 x 30 x 0.35 cms hurried in specially 2.00 No. 390.00
prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in
G.I. pipe 2 mtr. long with coupling and G.I. plug for earthing of switch
gear, conduct run of power plug etc.
95 GEB connection charges. 2.00 L.S. 7000.00
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
96 Demolition including stacking of serviceable materials and disposal of 10.80 Cum 1030.81
unserviceable materials with all lead and lift (i) R.C.C. work.
97 Demolition of brick work and stone masonry including stacking of 22.00 Cum 536.09
serviceable materials and disposal of unserviceable materials with all
lead and lift (ii) in cement mortar.
98 Dismantaling Doors, windows, ventilators etc. (wood or steel), 10.00 No. 244.98
shutters including Chowkhats, Architraves, holdfasts and other
attachment etc. complete and stacking them with all lead and lift. (ii)
Exceeding 3 Sq.m. in area.
99 Dismentaling tiled of stone floors laid in mortar including stacking of 76.84 Sq.m. 46.77
serviceable materials and disposal of unserviceable materials with all
lead and lift (i) in cement mortar.
Total Rs.
i.e. Rs. Nineteen lacs Ninety Five thousand Two hundred Fifty One and Fifty paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ___________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:
PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items
where there is a change as per actual mix design the cost of difference of cement consumption have
been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5. Credit for dismantalled materials of amount of Rs. 12,629.56 must be recovered from 1st R.A. bill
of Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by
me and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Bharuch Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - Circulars - 1.pdf
speficificatoin index dahail.pdf
techincal specification dahail.pdf
Electrical book.pdf
GRs - Circulars - 2.pdf
nivida no. 36.pdf
BOQ_HLPATI_2023-24_ANWADI _TNKRIA-1_SACHAN.pdf
SBD_HLPATI_2023-24_ANWADI _TNKRIA-1_SACHAN.pdf
NIT_HLPATI_2023-24_ANWADI _TNKRIA-1_SACHAN.pdf
nivida no. 39.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .