SITC of submerged Centrifugal pump set with auto coupling & allied accessories for U/G Sump & ESR of W/S scheme @ Appareal Park, Sachin, GIDC, Surat.

Sr.No Description QTY. Total Grand Total

Sr.No Description QTY. Total Grand Total

1 Supply, installation, testing & commissioning of Set 2.00 1,97,828.38

Submerged Centrifugal pump-motor set of

required capacity, having vertical / Horizontal

orientation, with 1500 RPM or less, 415V (+/-

10 %) , 3 ph, 50 Hz (+/- 3 %), Air filled, Squirrel

Cage induction motor (TEWC) of required

capacity and margin, with continuous duty (S1),

with vacuum pressure impregnation

treatments, dual core winding having IP

enclosure, "H" class insulation & with 30 meter

long PVC Sheathed Copper Cable, compatible

with delivery pipe suitable install on ISMB

required size min 250 x 125 and , MS plate

with chequered plate on whole slot to be

covered . pump- motor VFD and having

protections like: Thermal Overload,Moisture

Sensor in oil chamber etc. with grease

lubricated heavy duty antifriction bearings, C.I.

pump casing, C.I. Motor casing, shaft of SS

Impeller & wearing ring of CF 8 M, with Two

mechanical seals, suction strainer (SS), flange

drilling standard IS 1538 etc. complete set, as

per data-sheet & specification. Duty Conditions

: Discharge capacity : 200 M3/Hr and 30 Mtr

2 Design, Engineering, procurement, Installation, 3.00 8,273.92

Testing and commissioning of of double flange Nos.

SS Expansion Bellows of suitable size with

companion flanges, acessoseries erection

hardware, necessary mounting supports etc

complete. PN 1.6 NB 250 mm dia make as per

3 Design, Engineering, procurement, Installation, 2.00 29,063.76

Testing and commissioning of required size Nos.

double flanged Dual Plate Check Valve (DPCV) -

(PN 1.6) - 250 mm dia (At Pump Discharge)

Flanged Dual Plate Check Valve (NRV)

conforming to API 594 PN 1.6 with Cast Steel

body, withSS 410 hinge ring and wearing ring of

CF8 all necessary hardwares, complete as per

data-sheet & specification. Size : 250mm dia(

PN 1.6) flanges machined faced and drilled to IS

: 1538 / 1976 Part-IV/VI. Hydraulic tests

certificate & certificate of material of

construction of parts shall be submitted before

despatch of valves as per design with required

acessories, erection hardware, necessary

mounting supports etc. complete.250 mm dia

for various pumps.

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

4 Supply and Installation of Butterfly valves IS 3.00 9,964.66

13095 Double Flange Bearing ISI mark PN 1.6 Nos.

manually gear operated Following dia. valves

with Lowering, laying, and jointing in position

following Butterfly valves including cost of all

labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing etc.

comp . 250 mm dia.

5 Design, Engineering, procurement, Installation, Nos 1.00 59,443.55

Testing and commissioning of fixing in position

and jointing of 200 mm dia cast steel temper

proof Kinetic Double Orifice Cast Steel Tamper

Proof non- temper Air release valve PN1.6 type

flanged ends high performance CI air valves

with Isolating Sluice valves for water

combination type (Air release valve non

temporing type) having double ball, double

orifice with stainless steel ball, tamper proof air

vents rolling seal mechanism for air release and

anti vacuum application designed for

kg/cm2 working pressure and tested for

kg/cm2 pressure, having flat faced flanges and

drilled to IS : 1538 / Part-IV /VI. Hydraulic tests

certificate & certificate of material of

construction of parts shall be submitted before

despatch of valves. (Rate to include cost of

gaskets, bolts, nut and any other materials

required for jointing and its transportation etc.

including all taxes and duties.with required

acessories, erection hardware, necessary

mounting supports etc. complete.

6 Design, Engineering, procurement, Installation, Mtr 10.00 2,956.27

Testing and commissioning of suitable size

piping works includes, delivery, bypass, header

pipes, rising main, pipe manifold system

including fabrication welding of specials,

eccentric reducres, concentric reducers, y

connections, Tees, bends, puddle flanges, thrust

blocks, chambers, required civil works,

spectacles blinds, gaskets, nut bolts, washers,

etc complete with erection hardware,

necessary mounting support etc complete.

Scope also includes connections to rising main

with MS pipes complete in all respect.with

required acessories, erection hardware,

necessary mounting supports etc.

complete.make as per annexure. MS pipe of

suitable size and thickwith specials . following

size 219.1 mm dia.6.3 MM THICK

7 Do but 273 mm dia.5.0 MM THICK Mtr 100.00 3,009.80

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

8 SITC of suitable size of above pipes of flanged kg 370.00 98.98

end type fabricated MS Specials like tee, bend,

duck foot bend, tapper, reducer dilivery pipe

,distance pipe piece, blank flange, dismentling

joint, bolts, nuts, washers, rubber packing

etc.nut bolts etc for delivery header, rising

main and suitable for above pumps as per

actual site conditions & requirement qty. of

specials mentioned as per design requirement

with required acessories, erection hardware,

necessary mounting supports etc. complete

9 Design, Engineering, procurement, Installation, Nos 1.00 5,59,792.50

Testing and commissioning of 3 tonnes x

mtr. lift Single girder type H.O.T crane with

Hoist class - II , geared travelling trolly with

seven mtr. lift complete with manually

operated chain Pulley Block, Long Travel rail

track (40 mm sq.bar), moving or cross girder,

brake, safety device, etc and tested to 50 %

overload. span : approx 09 mtr or as per site

condition. runway : Approximately 12 mtr

with suitable size of girder & square bar or As

per site requirement as per site condition.

Single girder over head HOT crane suitable to

meet with the following requirement.

Consisting of rail, rail bridge, geared trolly.

with brake, limit switch, safety device, Pendent

control, M.S. fabricated ladder, with chains,

hooks, wire slings, 40 mm dia GI pipe railing,

erection hardware, necessary mountings

supports etc complete.

10 SITC of 0-6 kg / cm2 - 150 mm dia, size Pressure Nos 3.00 3,042.12

Gauge with siphon & cock and glysrin filld type

as per IS specification with SS ball valve, SS hex

nipple, hardwares etc. as per the direction of

engineer incharge (Pressure Guage fixing in

each pump set & header pipeline).with required

acessories, erection hardware, necessary

mounting supports etc. complete. make as per

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

11 Design, Supply, Installation, Testing and Nos 1.00 1,70,319.47

Commissioning of Power cum Motor Control

Centre of 400 A, 415, Power Cum Motor Control

Centre (PCC) cubical having depth not less than

500 mm throghout the required length &

detachable, fabricated from 2 mm CRCA sheet

steel, free standing, floor mounted,

compartmentalized, extensible, dust and

vermin proof enclosure, duly painted provided

with required rating switch gears and shall be

complete with (a) 400 Amp 2 No's MCCB

Incomer four pole (b) 250/320 Amp 1 No's

Change over (C) 250 Amp MCCB - 4 No's (d)

Amp MCCB 4 No's (e) 37.5 KW VFD Drive with

incomer switch (f) 400 Amp TPN Bus-Bar and

provided Energy meter with modus

communication etc complete as per details

12 Design, Engineering, procurement, Installation, Nos 1.00 31,266.00

Testing and commissioning of Lighting

Distribution Board Distribution board

fabricated from 2 mm sheet steel free floor

standing with one 415 V, 50 Hz TPN MCCB as

incomer and out going circuits, including

Electrolyte Copper bus bars, metering unit

lamps, timer etc complete for lighting and

auxiliary power requirements. DB complete as

per specification, single line diagram and

instruction of engineer In charge.make as per

annexure.The panel shall be instaallled on floor

with support of M.S structure

13 1.1 kV, 3 C x 35 sq. mm, multistrandard Mtr 260.00 738.31

copper conductor, XLPE insulated cable.

14 Solder less crimping type Copper lugs Nos 16.00 22.22

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. for 3 core 35 Sq. mm cable.

15 Providing and, fixing heavy duty flange type Nos 8.00 66.66

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables.3 core x

16 Providing and erecting XLPE(IS:7098)(I)-88 ISI Mtr 80.00 2,438.14

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables. (C)

3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core)

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

17 Providing and, fixing heavy duty flange type Ea 2.00 75.75

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

18 Solder less crimping type Copper lugs Ea 8.00 22.22

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (E) 35/50 Sq.mm.

19 Providing & laying of 50 MM Nominal OD Mtr 260.00 62.62

Doubled Walled Corrugated Pipes (DWC) of

polyethylene (conforming to IS 14930 - II) with

necessary connecting accessories like coupler,

Tee, L - Bow, etc. of same material at required

depth (90 cms) including excavation for laying

of cable below ground/ road surface for

enclosing cable and back filling the same to

make ground as per original & as per

instruction of Engineer Incharge - for Streelight

Cable of 1 x 4 core x 6 Sq. MM and Service cable

of 1 x 4 core x 16 Sq. MM.

20 Providing and erecting Mains with 1.1 KV grade Mtr 100.00 102.01

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copperconductor

FRLS PVC insulated stranded wire of green

colour for earth

continuity of following size (d) 3 wire 2.5 sq.

21 Providing and erecting Mains with 1.1 KV grade Mtr 300.00 82.82

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and

accessories (c) 3 wire 1.5 sq. mm

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

22 Design, Engineering, procurement, Installation, Pt. 8.00 354.51

Testing and commissioning of Lighting System

Internal Lighting –Point wiring for Light with

2-2.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected concealed

in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories

and earth continuity of following type, erected

on PVC / Metallic box, single mounting base

frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed.(a) with medium class rigid PVC pipe

and accessories. Light Points Cat-III

23 Supplying & erecting energy saving Energy Nos 6 493.89

Efficient E+ (1 - 4 ft) 28 watt retrofit tube fitting

with one no 28watt T-5 tube complete with

E.G.P. wings reflector / clear acrylic guard cover

& tube and electronic inbuilt circuit ballast of

rating 130 to 325 V A.C. The fittings should be

able to fit in any conventional existing T - 8 tube

fittings complete erected in an approved

24 Providing and erecting Approved make Ceiling Nos 2 1,738.21

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1400 mm. sweep

complete, canopy and 30 cms. down rod

erected on existing hook or clamp with 24/0.2

3 core flexible wire with earthing. [Make shall

be approved by Engineer in charge]

25 Point wiring for independent PLUG with Pt 4 493.89

following size mains earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires

upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected with

earth continuity connection erected on Metal /

PVC/Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic/Laminated sheet.

[B] 6/16A Plug and 16 amp switch with 2-2.5

sq. mm Cu. Mains from mcb d b boards. (a) with

medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

26 S.I.T.C. submersible pump set for bore of 150 Set 1 49,148.62

mm. dia. Or more having 3 phase motor

capacity not more than 12.5 H.With following

capacity Lifting and Lowering taken extra.

(A)12 Stage, 390 to 350 L.P.M. discharge at the

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

head about 95 to 107 mtrs. suitable for 50 mm

dia. Delivery pipe

27 Providing and erecting ISI marked PVC Mtr. 85 295.93

insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of

following Size. (g)3 Core x 10 Sq. mm

28 Supplying & erecting approved make 3 phase No 1 15,818.62

motor control cubical panel ( Star - Delta) made

from16 G. CRCA sheet duly painted with epoxy

powder painted inside and outside with hinged

doors and locking arrangement, consisting of

suitable size of ON- OFF isolator (AC - 3/23

duty) main fuses, single phasing preventer cum

water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum

WLG, indicating lamps for R- Y- B phases, over

load relay, Automatic water level controller,

Ammeter & Voltmeter each with two way

selector switch incoming wires duly socket

Crimped, Panel to be erected on angle iron

frame grouted on wall as directed. Star Delta &

main contactor, overload relay, thermal /

Electronic Star delta cutoff timer, start - stop

push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer

make only. Panel to be erected on angle iron

frame ground on wall. (a) S/D up to 12.5 HP

29 Approved make Three pole moulded case No 1 6,173.12

circuit breaker having breaking

capacity/strength ICU of 35 K.A. and above at

415 V. having Normal current rating up to

100A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all

internal connections & complete erected in

existing 16 G.M.S. housing. (CAT-III)

30 Supplying of following size of HEAVY UPVC 70 698.92

column pipe with coupler and wire lock Size 80 Rmt.

31 Supply of following size of TOP & BOTTOM Per 1 2,681.55

accessories i.e. Adaptor set (CI) long, pump Set

guard set, starter pipe Rubber ring for

submersible pump & UPVC column pipe as

directed by Engineer - in - charge with

necessary plumbing as desired.

32 Supplying & erecting G.l. bend with GI coupling Ea. 2 273.71

at one end for pipe connections

33 Supplying & erecting ISI Marked G.l. Union for Ea. 14 407.03

pipe connections

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

34 Supplying & erecting Mild Steel heavy duty Ea. 1 170.69

Flanges with rubber packing and hardware

materials for pipe connections suitable for (C)

35 Providing and supplying ,Lowering,Laying & Ea. 2 7,272.36

Jointing ISI mark 80 mm C.I D/F Non Return

valve including

all taxes,insurance ,transportation ,freight,

charges ,octroi,inspetion charges ,loading,un

conveyance to departmental stores ,staking

etc.complete with ISI mark only , IS 5312 ,PN-

36 Heavy duty clamp made from 4" x 1.5" iron strip Ea. 2 221.19

suitable for column pipe 1.5" to 2" length

suitable to 80 mm dia column pipe & 200 mm

dia Borewell. (C) 80 mm (2.5") dia pipe

37 Supply of all flanged, heavy duty CI Tee as per Kg. 150 69.12

IS 1538/ 1986 specification & size 100x100x80

mm dia Supply of M.S.Blind blank flange having

15 mm thickness. With standard holes for

38 Supplying & erecting funnel type earthing Ea 2 7,874.97

having earth plate of following size burred in

specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I. pipe

mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification (C)

with 60 x 60x 0.315 cms. Copper earth Plate

39 Providing and erecting required size Copper Kg 80 794.87

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc. using

40 Lowering of submersible motor pump set Per 1 2,568.43

complete with required. Nos. and size of casing Job

pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads

of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with

water. (B) Above 60 Mtrs and upto 120 mtrs as

directed by Engineer-In-Charge

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

41 Providing & Erecting Chain Pulley Block with Per 2 17,161.92

triple gear arrangement, lifting hook, laod chain Job

& hand chain & locking device etc 1 T Manually

42 Supplying & erecting approved make Automatic Ea 2 2,355.32

liquid level controller 6A as per instruction of

Engineer in charge on site complete with wiring

connection with existing wires, with copper

conductor from pump to uper & lower tank.

43 Supplying & erecting carbon dioxide (CO2) fire Ea 5 6,591.26

extinguisher user of following capacity with

necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete.

[A] For 4.5 Kg Capacity

44 Supplying & erecting ABC powder type Ea 5 848.40

'Ceasefire' type Fire extinguisher as per IS

13849 or 1 Kg capacity with necessary clamp

for erection on wall

Total Rs. Rs.24,94,236.00

The Unit rates specified for various items to be executed as per Schedule "B" attached with the

Price Bid are excluding GST but inclusive all labours, materials, testing charges, equipments, all

incidental charges involving in the work and as specified in the Mode of measurement & payment

of detailed specifications of items incl. all taxes, royalty, octori, transportation cost etc. all as

applicable presently as to be enforced for future by any / all including Central/State Government

& Statutory bodies from time to time.

I/We agree to carry out above work at % above the estimated Rate put to tender

Percentage in words (_ )

I/We agree to carry out above work at % below the estimated Rate put to tender

Percentage in words (_ )

Estimated Amount put to Estimated Amount put to

Tender Rs. 24,94,236.00/- Tender Rs. 24,94,236.00/-

Add % Above Rs. . Deduct % Below Rs.

Net Amount Rs. (In figures). Net Amount Rs. (In figures)

Rs. (In Words). Rs. (In Words)

I/we have read the condition mentioned in this tender and agree to abide by the same

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.