Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC 58 C MANTRI BARI ROAD WARD NO 32 AGARTALA AMC AGARTALA WEST TRIPURA | ₹46.4 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical VILL WARD NO 10 PANISAGAR NAGAR PANCHAYET P S PANISAGAR DIST NORTH TRIPURA | NORTH TRIPURA | TRIPURA | 799250 | - | - | Rejected-Technical Did not submitted shortfall documents |
| 3 | Rejected-Technical | - | - | Rejected-Technical Did not submitted shortfall documents |
| 4 | Rejected-Technical CHANDMARI KUNJABAN WARD NO 6 NCC WEST TRIPURA PIN 799006 | WEST TRIPURA | TRIPURA | 799006 | - | - | Rejected-Technical Did not submitted shortfall documents |
Tender Value
₹43.5 L
EMD Value
₹87,003
Closing Date
27 Jan 2026, 3:00 pmClosed
Executive Engineer (Agri), North
O/o the EE(Agri), Dharmanagar,North Tripura
Infrastructure Development for creating modern Agri Product market at Panisagar under North Tripura District SH Construction of flat roof covered market shed Additional work
2026_AGRI_69264_1
38/SE/AGRI/EE(NORTH)/2025-26
Open Tender
Civil Works
60 days
Panisagar under North Tripura
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
₹87,003
O/o the EE(Agri), Dharmanagar,North Tripura
3 Apr 2026
16 Jan 2026
27 Jan 2026
16 Jan 2026
27 Jan 2026
16 Jan 2026
16 Jan 2026 - 22 Jan 2026
22 Jan 2026
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil a) Foundation trenches
Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
Supplying chemical emulsion in sealed containers including delivery as specified. a)Chlorpyriphos/Lindane emulsifiable concentrate of 20%
Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion): Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: a) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
b) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- a) RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size).
Centering shuttering including struttings, propping etc. and removal of form work for: a) Foundations, footings, bases for columns.
b) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
c) Suspended floors, roofs, landings, balconies and access platform with shuttering ply
d) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
j) Weather shade, chajjas, corbels etc. including edges
Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
First class brick work in foundation and plinth including cost of all materials as required complete:- a)In cement mortar 1:4 ( 1 cement : 4 fine sand ).
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-a)In cement mortar 1:4 ( 1 cement : 4 fine sand ).
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete A) Fixed to openings /wooden frames with rawl plugs screws etc.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. A) Fixed to openings /wooden frames with rawl plugs screws etc.
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. Mat Finish Tiles a) Ceramic Tiles 1st quality 300 x 300mm in all shades and designs
Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. i) Light shade pigment using white cement
Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete
6 mm cement plaster of mix In cement mortar 1:3 ( 1 cement : 3 fine sand ).
12 mm cement plaster of mix In cement mortar 1:4 ( 1 cement : 4 fine sand ).
12 mm cement plaster of mix: In cement mortar 1:6 ( 1 cement :6 fine sand ).
15 mm cement plaster on the rough side of single or half brick wall of mix: In cement mortar 1:6 ( 1 cement :6 fine sand ).
Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
Neat cement punning
Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinable priming coat to give an even shade (payment shall be made after submission of test certificate issued by manufacturer). -New work ( two or more coats) over and including water thinnable priming coat with cement primer.
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 kg/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete(payment shall be made after submission of test certificate issued by manufacturer). New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
Painting with synthetic enamel paint ( two or more coats) of required colour of approved brand and manufacture on new work to give an even shade.(Payment shall be made after submission of test certificate issued by the manufacturer)-Two or more coats on new work
Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tappered up to 300 mm from the bottom of the bamboo as per drawing and specification For market shed
Handling and driving bamboo (1st class) 85 mm to 100 mm dia up to the length required by heavy hammer as per drawing and specification
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.35 MB
DNITPanisagarAgriSE.pdf
Tender Documents • 4.06 MB
BOQ_70482.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid