39/EUDC-(GN)/Lko/2024-25

Amount

Cartage including loading unloading & Proper Stacking of following stock materials from store center departmental store to dump site distance 0 to 20Kms

PCC POLE 8. 5 mtr long

ST POLE 9/11 Mtr long

LT Cable 3.5x400/240sqmm

11KV HT Cable 3x70/120/sqmm

ACSR Conductor

11KV Metering cubical

11KV CT&PT Unit

Line material

Transformer 25kva

Transformer 63kva

Transformer 100 kva

Transformer 250 kva

Transformer 400 kva

Transformer 630 kva

H.T ABC Cable 3x120+1x95+1x16

L.T.ABC Cable 3x95+1x70+1x16

LT DP BOX

CABLE BOX O/D & I/D

Fabrication, erection of sub -station Double pole on 11 mtr longST Pole/PCC Pole 8.5mtr long with fixing of necessories clamps, accessoies required including supply and fixing of straight MS 100X50MM.(2240MM LONG) 2 nos . with arrangment of fixing 3 nos. pin insulator, grouting in 1:4:8 cement sand brick and ballast and making of plinth 300mm above graund level along with D.O feuse set as per RESSPO spenc. & direction of E/I ST pole shall be supplied by the depth.

Fabrication, erection, of single 11 Mtr long ST Pole with fixing of X-arm with necessary clams, accessories required including supply and fixing & digging of pit and fixing of all accessories clamps as well as grouting and plinthilng of pole as per RESSPO Norms.Only pole shall be supply by deppt.

Fabrication, erection, grouting plinthing of single pole on 8.5 M PCC Pole including LT Clamp with nut bolt .Including grouting of support and plinthing 300 mm above ground level.as per RESSPO Norms

Grouting & binding of stay set in 1:4:8 ratio with cement,sand,and brick,ballast including cost of all grouting meterials as per RESSPO

Earthing of pole by M.S Earthing rod

Stringing sagging binding jumpering of 11 kv 3 phase three wire line with ACSR conductor

Stringing,sagging,binding and jumpering of 3x95x120 AB Conductor with the help of All type of clamps (cost of clamps shall be borne by the contractor)

Mounting and fixing of three phase distribution box as per norms

Mounting and fixing of three phase Distribution Box Provided by the Contractor as per Norms

Mounting of 25kva T/F as per RESSPO norms

Mounting of 63 kva T/F as per RESSPO norms

Mounting of 100kva T/F as per RESSPO norms

Mounting of 250kva T/F as per RESSPO norms

Mounting of 400kva T/F as per RESSPO norms

Mounting of 630kva T/F as per RESSPO norms

Laying of 11 kv 3x70/120mm XLPE Cable in single circuit By Drilling method under graund and approximate 1 mtr depth including digging of trech cutting of road with leying of as per agriment norms

Laying of 11 kv 3x70/120mm XLPE Cable in Single circuit Drilling/Manual under graund and approximate 1 mtr depth including digging of trech cutting of road with leying of as per agreement norms

Laying of 11 kv 3x70/120mm XLPE Cable in Double circuit by Manual Method under graund and approximate 1 mtr depth including digging of trech cutting of road with leying of as per agriment norms

Cardel type garding of 11 kv line made of GI No 10, GI wire shall be supplyed by the department

Fixing of garding engle of size 40x40x5x1500mm all malterial shall be supplyed by the contractor

Hosting of 11kv cable along with providing of G.I. pipe 3 diax3mtr cost of accosserise will be born by the contractor as per respo norms

High pressure testing of 33 kV and 11 kv 3x70+3x120+3x120+3x185+3x300 Sq. mm XLPE cable upto 58 KV for the duration of 05 minutes after completion of laying, joints and terminations (Testing Equipment will be arranged by the contractor).

Pipe Type earthing with 20mtr deep boring and providing G.I. pipe 1.5 dia (20mtr G.I.pipe ) of tata jindal make and GI Strip 25x5mmx6 mtr long attached with clamps L Nut bolts and GI pipe All material shall be supplyed by the contractor

Instalation and commissioning of CT/PT Metering unit including its connection in between TVM Meter and CT/PT unit with required size of copper cable. Cable will be arranged by the contractor at his own cost

Fixing of metering cubical 11kv

Masonry type Distribution Pillar boxes with first class brick ballast cement, coarse sand, local sand, brick ballast and MS round bar of 10 mm dia including supply and mounting of 02 nos. Straight MS Angle 50x50x6x750 mm 2 nos. Henely type tailless fuse unit one no. for incoming and other for outgoing, Copper bus bar 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Construction of plinth suitable for 250/400 KVA T/F including exacavation of foundation base concreting of CC 1:6:12 ( cement ,find sand & brick ballast ), Ist class brick work in cement morter of ratio 1:4 foundation cc in 1:4:8 ratio (cement find sand & brick ballast ) and CC work with ratio 1:2:4 cement coarse sand and stone grit of 20mm guage as per RESSPO Norms

Laying LTCable 3.5x400/240 Sqmmm

Providing and fixing of 11 kv TPMO Set with all accessories and clamps (all material shall be borne by the contractor ) as per RESSPO Norms

Supply and Fixing 11 KV D.O. Fuse Set.

Tapping of line

Received back Material & T/F as per actual quantity of work

Fencing of T/F Plinth with the help of wiremesh after geauting proper size of angle as per RESSPO Norms inclusive of all material such as wire mesh, Angle,Flats, Nut& Bolts etc.

Supply for Indoor Type Electric Distribution Panel INCOMING:- 250A TP+N MCCB 25KA 1 NO L&T Make Speradrs Terminal 2 Set L&T Make METERING:- VAF Meter 1 No Selec make R Y B Indicator 1 Set TNi make Control Fuse 3 Nos FTC make C/T Coil 3 Nos OUTGOING:- Phase Bus Bar 300A Neutral Bus Bar 250A Complete Panel

Cutting and chopping of tree branches covering of 11 KV Feeders.

Hindustan Electric Work (BID ID -5105018)

M/s S S Associates (BID ID -5106844)