REPAIRS TO DRAINS, GARBAGE BINS, COMPOUND WALL, GATE, SEWAGE LINE, PLASTERING, FLOORING, JOINERIES, PLUMBING, SANITARY FITTINGS ETC AT ARMY AREA TRICHY UNDER AGE (I) COIMBATORE

Amount

Taking down existing PVC/Steel/Wooden chowkats or frames not exceeding 1.5sqm each with shutters (without taking of shutters from the the frames) and removing to store complete all as specified and as directed.

All as per item No. 01 above, but exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any descripions exceeding 1.0 Sqm and not exceeding 2.0 sqm each and removing to store complete all as specified and as directed.

Taking down shutters of any descripions not exceeding 1.0 sqm each and removing to store complete all as specified and as directed.

M&L Second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints complete all as specified and directed.

M&L 35mm thick, second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L 35mm thick, second class hardwood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30 mm thick, (style) consisting of frame out of MS tube for top and bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with out glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

M&L Plain cement concrete 1:3:6, Type C0, using 12.50mm graded stone aggregate as in filling back of pressed steel frame complete all as specified and as directed.

M&L Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing holdfasts and coping including necessary use and waste of form work complete all as specified and directed.

S&F 100mm size, Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 100mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 150mm size, Aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 300 mm long, aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and as directed.

S&F 140 mm over all length, floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs to steel / Wooden Joinery complete all as specified and as directed.

S&F 4.0 mm thick, ground or obscured or frosted sheet glass, ordinary quality in squares not exceeding 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F 4.0mm thick, Sheet glass, ordinary quality in squares not exceeding 0.50 sqm in each pane and glazing with oil putty as in repairs complete all as specified and as directed.

S&F 4.0mm thick, Sheet glass, ordinary qualityin squares exceeding 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F Solar control film, 25 micron, reflective type, sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F 20-25mm dia Drapery rod, PVC Coated steel, Fancy type, including provision of 2 Nos of Brackets PVC Coated steel fancy brackets & end stops 2 Nos in Each opening etc complete all as specified and directed.

M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L 12 mm thick Prelaminated termite resistant water proofing plywood, interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, fixed in repairs complete all as specified and as directed.

M&L 18 mm thick Prelaminated termite resistant water proofing plywood, interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, fixed in repairs complete all as specified and as directed.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Mild steel 300 mm size, ordinary rat rail rod pattern springs including rollar and rollar plate complete all as specified and as directed.

S&F Health faucet (Jet Spray), CP, 15mm bore with flexible pipe and fixing nut etc complete fixed in repairs complete all as specified and as directed.

S&F PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair complete all as specified and as directed.

S&F Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste, including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs complete all as specified and as directed.

S&F Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs complete all as specified and as directed.

S&F Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets, fixed in repairs complete all as specified and as directed.

S&F Vitreous china wash basin, white, flat back, size 450 x 300mm including brackets, fixed in repairs complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) , P trap/ S trap etc complete fixed in repairs complete all as specified and as directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and as directed.

S&F15mm bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

S&F 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs. (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F Pillar taps, fancy type, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F 15mm bore Pillar taps, of PTMT any colour high pressure screwed for iron pipe and fixed in repairs (Minimum weight 15mm-110gms) complete all as specified and as directed.

S&F Stop/angle valves, 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F Stop/angle valves, 15mm bore, for shower rose, fancy type, chromium plated cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F 32/40mm dia expandable type PTMT waste pipe for wash hand basin/kitchen sink complete all as specified and diercted.

S&F 20 mm dia, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 grams) complete all as specified and directed.

S&F 15 mm dia, ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15 mm - 142 grams) complete all as specified and directed.

S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15mm bore, chromium plated cast copper alloy fancy type, two in one combination of bib tap and angle valve fixed in repairs complete all as specified and as directed.

M&L Drilling holes exceeding 25mm and not exceeding 60mm dia in granite top (20mm thick) and in the RCC slab (75mm thick) for bolts, pipes, complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F Galvanised steel water tubing, medium grade, including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete including taking up (or) down the existing GI pipe completely all as specified for following bore of pipes complete all as specified and as directed.

15mm dia bore

20mm dia bore

Refixing of old steel tubing and connection in new or old position (wall, ceiling, floors etc.,) including taking up or down steel tubing and connection, including cleaning for refixing complete all as specified and as directed.

15mm dia bore

20mm dia bore

Dismantling water tanks capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as specified and as directed.

Dismantling water tanks capacity exceeding 500 ltrs and not exceeding 1000 ltrs complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, 500 ltrs capacity complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank, ISI marked of capacity 1000 ltrs hoisted and fixed in position complete all as specified and as directed.

Taking down eaves gutters and waste water pipes (any size or pattern), including all fittings, head, shoes, bends, swan necks etc, including removal to store complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bend any radius with access door suitable for 110mm dia pipes fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) bend any radius with access door suitable for 75mm dia pipes fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) branch piece, single 'Y', equal or unequal for 110mm bore pipe with access door in repairs complete all as specified and as directed.

S&F PVC (SWR) branch piece, single 'Y,' equal or unequal for 75mm bore pipe with access door in repairs complete all as specified and as directed.

S&F PVC (SWR) Vent cowl, suitable for 110mm dia vent pipe complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick/stone walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering on brick wall/concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of newly plasterd walls surfaces and applying 3 coats of white wash complete all as specified and as directed.

M&L complete removal of existing treatment on old wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty and a coat of priming paint complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink adicive using 40 PSI pump and applying two coats of brush bond acrylic polymer modified cement based coating 1mm thick or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation, providing 20mm thick water proofing screed bed /plaster in CM 1:4 mixed with conplast x 42IC @ 100ml or Pidiproof LW @ 200ml per bag cement. Two coats of Nitro proof 100 bitumen based water proofing over plastered surface complete all as specification of chemical resistant coating complete all as directed by Engineer in Charge. Note: The work shall be executed through authorised applicator and in accordance with their respective manufacturers instructions.

M&L 100mm thick lime concrete with lime mortar 1:3 mix and 40 mm graded brick coarse aggregate in sub-floors complete all as specified and as directed.

M&L 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), are of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc complete all as specified and directed.

M&L Glazed ceramic tiles 300x200x6-7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick light shades (square/rectangular) area of each tile not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc. complete all as specified and as directed.

M&L Granite slab (of any type) 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone including cutting and polishing etc., laid over and including 20mm thick cement screed in cement mortar 1:6 and roudning to edges of stone slabs and demoliton of old stones. slabs and tiles of any description etc.,as in platforms/cooking tops complete all as specified and as directed,

M&L 25mm thick cement concrete, type B1, 1:2:4 using 20mm stone aggregate as in sub floor, sub bases, floors and pavings etc., complete all as specified.

M&L 10mm thick backing coat/screed in CM 1:4 on fair faces of brick/ stone wall surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade complete all as specified and as directed.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof coverings complete all as specified and directed

S&F Cast iron floor trap 75mm dia with grating fixed in cement concrete 1:2:4, type B-1 using 20mm graded stone aggrgate including jointing to waste pipe complete all as specified and as directed.

S&F Cast iron nahani trap 75mm dia with grating fixed in cement concrete 1:2:4, type B-1, using 20mm graded stone aggrgate including jointing to waste pipe complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Gypsum Board, 12mm thick in ceiling fixed with screw as per manufacturers instructions including finishing all as specified and directed (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

M&L 10mm thick rendering on brick wall or concrete surfaces in CM 1:4 finished even and smooth complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specfically provided for complete all as specified and as directed.

M&L Precast cement concrete 1:2:4, type B1, using 20mm graded stone aggregate, set in CM 1:6 as in cover slab complete all as specified and as directed.

M&L Mild steel deformed bars, 10mm dia and over cut to length bent to shape required, including cranking, bending spirally or hooking for columns & binding with and including MS steel wire not less than 0.90mm dia complete all as specified and as directed.

M&L Cleaning/desilting of existing bed of the drains constructed in any masonry, average thickness not exceeding 10cm including removal of vegetarians, growth or bushes, roots and getting out including disposing off excavated silt, soil, vegeterians, shrubs etc to a distance not exceeding 100m where directed and deposited at a level not exceeding 1.5m above the stating point complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 75mm thick, PCC 1:3:6, type C1, using 40mm graded stone aggregate finished even and smooth with out using extra cement as in plinth protection/foot path etc. complete all as specified and as directed.

S&F Framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drills for fixing of steel sheeting. doors etc to be prepared for hanging and including either hooks and hinges and steel hanging door fitting (excusing of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete of Gde Fe 410-0 oe Fe 310-0 complete all as specified and as directed.

M&L Preparing newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Cleaning of septic tank by removing septic tank cover, pumping out water sludge and sediments by mechanical or manual means transporting the water sludge etc. in covered in pits where directed including necessary excavation, refill and disposal of surplus soil etc. complete cleaning of septic tank with water placing the cover intact, removing of bush, vegetation nearby septic tank to an extend of 3m all around all as directed by Engineer in charge

Cleaning of manholes any size and not exceeding 1.5m depth including lifting, removing sludge, water and cleaning with water including cutting grass, vegetation and bushes to a width of 60cm all around manholes complete all as specified and as directed.

All as per Sr item No.127 above but manholes of depth exceeding 1.5cm Note for Sre item Nos 126 to 128:- The rate quoted shall deemed to including for removing sludge, sediments, vegetains etc, and depositing to out side MD land as directed by Engineer-In-Charge

Cleaning of existing SWG/ CI pipe line and removing all sludge and foreign matters completely and neatly form the pipe line laid in any depth and making it serviceable for free flow of sewage in 150mm bore/ 100mm bore pipe complete all as specified and directed

Deploy and attend the maintenance complaints to clean and remove the choked gully, nahanitrap, sewage and manhole blocks located at inside and outside of the building based on the frequent / daily complaints of the occupants/ users of the residential / OTM accn at Army area Coimbatore and Fd Regt Madukkarai under Stn HQ Coimbatore complete all as specified and as directed. Note : (i) The working labour should have his own conveyacne to reach the working place with all requisite tools for the relevant field to perform the task, all necessary safety measaures shall be borne by the contractor. The attendance of the labour is to be maintained in the Attendance Register. The attendance should be entered in the MB and be fwd alongwith RARs/Bills to the audit authority during payment to the contractor. (ii) Working hours per day - 0900 Hrs to 1300 Hrs and 1330 Hrs to 1730 Hrs maximum numbers of labours employed per day is restricted to 02 Nos only.

Removing of sewage water from septic tank/sewage sump/soak well through septic tank cleaning lorries having pumping arrangements and carrying the sewage water in tanks of the lorry, having 5000 litres capacity and disposal of the sewage water outside defence area complete all as specified and as directed.

Cleaning of Gully/nahani traps chokes and cleaninhjg the same as specifed above complete all as specified and as directed.

Removing existing sludge including filling materials from existing soakage pit and disposting the same in closed container and disposed at a distance exceeding 500m and not exceeding 1.0km complete all as specified and as directed.

M&L loose filling of aggregate with broken stone or boulders of gauge 80 to 150mm in soakage wells, soakage pits etc complete all as specified and directed.

Demolition and breaking up drain pipes of 150mm dia, any description, set in cement mortar complete all as specified and directed.

Excavation in trenches not exceeding 1.5metre wide and not exceeding 1.5 metre in depth and not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Removing excaveted material to a distance exceeding 50m and not exceeding 250m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L Sand filling in trenches as a cushioning/bedding and haunching to PVC pipe including watering complete all as specified and directed.

S&F 160mm dia PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L Plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in bed plates of manhole complete all as specified and directed.

M&L Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in bed plates of manhole complete all as specified and directed.

M&L Plain cement concrete 1:2:4, type B1, using 40mm graded stone aggregate as in surface channel etc., complete all as specified and directed.

M&L PVC gully trap 110mm dia setting and jointing with solvent cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L Preparation of old decorated steel surfaces of any description over 10cm width or girth not otherwise applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate including necessary use and waste formwork as in coping complete all as specified and directed.

M Govindarajan

M/S VIGNESH POWER SYSTEM

KDR CONSTRUCTION

RELIANCE SALES AGENCY

TECKXPERT ENTERPRISES