REPAIR / MAINT OF GI CHAROPY, PLYBOARD, NEWAR, RECANNING ETC OF VARIOUS FURNITURE AT AF STATION UNDER GE (AF) JAMNAGAR NO.2

Amount

Conversion of charpoy GI pipe nylon newar to charpoy GI pipe plywood top by removing nylon newar and S&F of 12mm thick ply, ISI mark of size 1980mm X 900mm by fixing with 10Nos nut and bolt of suitable size with GI washer along with provision of 25mm x 3mm Flat iron stiffner 02 Nos at the ends to welded with the top of long rail as directed by GE. The Flat iron shall be painted with two coats of synthetic enamel black paint over a coat of red (FD-220(R)).

Removing of damaged / broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides complete all as specified in drg and directed.

Removing of old damaged / broken long rail from charpoy and making of short rail from u/s long rail retreived from ser No.1.01 above incl threading & fixing in charpoy GI pipe complete all as specified in drg & directed by Engr-in-charge.

Removing of old damaged / broken short rail from charpoy and making leg from u/s short rail retreived from ser No.1.02 above incl threading, S&F 3mm thick flat iron plate in bottom to be welded with legs & fixing in charpoy GI pipe complete all as specified in drg & directed by Engr-in-charge.

Removing old broken / damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

M&L for re-canning of "Chair Verandah" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in grg and as directed by Engr-in-Charge. (Drg No FD - 256(R))

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel.

Removing old and unserviceable parts / components of “chair tubular office steel with / without arms” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 (R)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per Godrej pattern complete all as specified and directed.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per Godrej pattern complete all as specified and directed.

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

Removing following old and unserviceable parts / components of “various types of chair revolving” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Neelkamal etc )

Removing the existing old foam & tapestry of seat and S & F new 40 density foam cushion 75 mm with tapestry as approved by GE .

All as per item No 4.01 above but back of chair revolving.

All as per item No 4.01 above but arm of chair revolving.

Removing the existing U/S casteor wheel and S&F new caster wheel.

Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc.

Replacement of complete plate base stand assembly including all necessary fitting etc.

Removing following old and unserviceable parts / components of “chair school with hand board” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05)

S & F in repair PVC seat & back one piece of chair school with hard baord. (Drg No.FD/ E6/ MAP/ 05)

Removing old u/s tops from chair school hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Hard rubber shoe.

Removing following old and unserviceable parts / components of “Table 3X3 Steel” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1009(r))

Removing old u/s tops from table 3X3 steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg fabricated with 25 mm size steel square tube with 1.6 mm wall thickness.

Removing following old and unserviceable parts / components of “Table 3' x 2' with & without drawer” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41(R))

Removing of old u/s top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

Leg made of first class hard wood (teak wood) of size and specification as per drawing.

Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

M&L for removing the existing worn-out cane and recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-in-charge.

Repairs to recliner by replacing of unsv seat / back cushion foam with tapestry cloth / rexin / leatherite and other aceesories what so ever required as per existing pattern / structure and sample approved by Engr-in-charge.

M&L for replacement of old u/s seat / back cushions, S&F new foam cushion of size 21''x20''x100mm thick, 32 density (Make: Sleepwell / Kurlon) duly covered with tapestry cloth of approved quality/colou/texture (cost of tapestry superior quality of foam & cover tepesty cloth approved by GE not less than 340/- per running metre) (Drg No FD-281(R)

M&L for spot welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing.

M&L for reweaving of charpoy GI pipe with 50 to 55 mm wide nylon newar white / light colour (1st quality) both side (top and bottom) closely weave using newar not less than 1.5 Kg per charpoy by weight including removal of old unserviceable newar, and including tightening of joints of charpoy frame before weaving all as specified and shown in drawing and as directed by Engineer-in-Charge. (Drg No FD-220)

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish / clear varnish as directed by Engr-in-charge :-

Bed plywood (FD-246 & 247)

Chair dining (FD- 279 & FD/MAP-II/05)

Chair dining (FD/MAP-II/04)

Chair dining long back (FD-357 )

Chair easy (FD-229)

Chair writing (FD 250 & 280)

Hat stand with mirror (FD-233 & 362)

Peg table (FD- 236 & 277)

Sofa set 5 seater (FD-258, 281 & 373)

Sofa set 4 seater (FD-258, 281 & 373)

Table dining for 6 persons (Drg No - FD 239, 273)

Table dining for 8 persons (Drg No - FD 239, 273)

Table writing (Drg No - FD 249,275)

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 )

Teapoy (Drg No - FD-232,278)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283)

M & L for preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge.

Almirah med steel (Drg No - FD 243 /1032)

Almirah large steel (Drg No - FD 67/1031)

Book case steel 1675 x 840 x 305 (Drg No - FD-1028)

Book shelf open small steel (Drg No - FD-69 M)

Chair writing (Drg No - FD/E6/MAP/12)

Rack 6 tier steel (Drg No - FD-1038)

Rack shoe steel (Drg No - FD E6 MAP 02)

Table office officers steel (Drg No - FD 84 M,1003)

Table office clerk steel (Drg No - FD 84 M,1004)

Table 900 x 600 x 760 (Drg No - FD 1007)

Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008)

Table 900 x 900 x 760 steel (Drg No - FD-1009)

Teapoy verandah (Drg No - FD 35 / 255 / 383)

Bed hard steel (Drg No - FD / E6 / MAP / 8 (R))

Charpoy IP with hard top (Drg No - FD / MAP- II /01)

Chair school hand board (Drg No FD / E6 / MAP / 05)

Locker bed side (Drg No / FD - 1029)

Chair varandah steel (FD- 256)

motwani and associate (BID ID -3153263)

S t modi (BID ID -3158289)

Pratik Enterprise (BID ID -3153273)

Dhangot Brothers (BID ID -3152469)

PRAFUL ENTERPRISES (BID ID -3150793)

SK INDUSTRIES (BID ID -3153102)

M/S Rajendra Constructions (BID ID -3152557)