Providing Streetlight on Godhra-Lunawada-Shamlaji Road, km.369/8 to 373/4 (Trupti Hotel to Sarangpur Tran Rasta)

Name of Work :- Providing Streetlight on Godhra-Lunawada-Shamlaji Road, km.369/8 to 373/4

(Trupti Hotel to Sarangpur Tran Rasta)

Qty. Unit Item Per Amount

In Figure In Words

Providing and erecting Mains with ISI 115.14 Rupees One

marked, 1.5KV grade electrolyte multi hundred Fifteen

stranded, annealed copper conductor with Paise Fourteen

heat resistant PVC insulated conforms to IS Only

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

20 Mtrs. 1 relays, power switchgears, motor starters & Mtr.

control wiring) with required size of copper

lugs, nuts and bolts if required.(f) One wire

(Make:Havells,KEI,finolex,RRkable,

Supplying and erecting Flexible PVC 58.58 Rupees Fifty

insulated multi strand multi core 1.1 kv Eight Paise Fifty

grade ISI marked copper wires of following Eight Only

size to be erected as directed.(e)

3500 Mtr 2 Sq.mm 3 core round PVC sheathed Mtr

(Make:Havells,KEI,finolex,RRkable, Apar

Providing and erecting Miniature circuit 297.95 Rupees Two

breaker single pole 0.5A to 2A system and hundred Ninety

having breaking capacity 10 KA to be Seven Paise

362 Nos 3 erected in existing box. confirming to IS Ninety Five Only Ea

8828/1996 with ISI Mark (Cat.III)

(Make:L&T,havells,Hager,C&S, Siemens)

Providing and erecting Approved make 6790.23 Rupees Six

Four pole moulded case circuit breaker Thousand Seven

having breaking capacity ICU of 25 KA. at hundred Ninety

415 V,having normal current rating up to 25 Paise Twenty

A to 100A. with Fixed thermal & magnetic Three Only

release suitable to work on A.C. supply

4 Nos 4 c/s. with all internal connections, spreader Ea

tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only (Cat.III)

(Make:L&T,havells,Hager,C&S, Siemens)

Providing & erecting 240 V MCB double 362.59 Rupees Three

pole switch for motor & inductive load (C hundred Sixty

Curve) having 10 KA breaking capacity & Two Paise Fifty

confirms to IS : 8828 in existing box having Nine Only

8 Nos. 5 following capacity (B) 40 Amp.(Cat.III) Ea.

(Make:L&T,havells,Hager,C&S, Siemens)

Providing and erecting HOT deep 77.77 Rupees Seventy

Galvanised iron strip wire 8 to 16 SWG. Seven Paise

Qty. Unit Item Per Amount

In Figure In Words

Supplying & erecting earth pit of minimum bore 4591.46 Rupees Four

dia.150mm size approved make Earthing Thousand Five

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of One Paise Forty

50mm having 80-200 Micron galvanising, Inner Six Only

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency

and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate)

& having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain

moisture for long time Necessary test report

must be submitted by Agency.(a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Pipe type earthing 368.65 Rupees Three

having 150 cms.long and 2.5 cms. dia. hundred Sixty

galvanised iron pipe with coupling and buch Eight Paise Sixty

buried in specially prepared earth pit Five Only

complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as 171.70 Rupees One

required for pipe type earthing. hundred Seventy

36 Nos 9 One Paise Ea

Providing and erecting XLPE(IS:7098)(I)-88 341.38 Rupees Three

ISI armoured cable multistrand Aluminium hundred Forty

conductor for 1.1 KV. to be laid on wall One Paise Thirty

with necessary clamps or in existing trench Eight Only

180 Mtr 10 / pipe of following size of cables (C) 3 1/2 Mtr

core 50 Sq. mm ( 25 Sq.1/2 mm core)

(Make:Havells,KEI,finolex,RRkable,

Providing and erecting XLPE (IS:7098)(I)- 168.67 Rupees One

88 ISI armoured cable multistrand / Solid hundred Sixty

Aluminium conductor for 1.1 KV. to be laid Eight Paise Sixty

on wall with necessary clamps or in existing Seven Only

4400 Mtr 11 trench / pipe of following size of cables (d) Mtr

4 core 10 Sq. mm (Make:

Havells,KEI,finolex,RRkable,

Qty. Unit Item Per Amount

In Figure In Words

Making trench in Hard Murrum / Tar Road 74.74 Rupees Seventy

of suitable width of 90 cm or required Four Paise

depth for laying any size of cable or locating Seventy Four Mtr

the fault all over the run and back filling the Only

same and making the surface as normal

Drilling the road without breaking the road 492.88 Rupees Four

surface (Asphalt) for laying of cable for hundred Ninety

200 Mtr 13 feeding power supply by making up to Two Paise Eighty Mtr

following size of holes at both ends Eight Only

complete.(A) Up to 100 mm bore dia

Providing & laying approved make Double 62.62 Rupees Sixty

walled corrugated pipes (DWC) of Two Paise Sixty

polyethylene(conforming to IS 14930 II )with Two Only

necessary connecting accessories of same

3800 Mtr 14 material at required depth in existing trench Mtr

for laying of cable. below ground / road

surface for enclosing cable (A) 50 mm

Providing and, fixing heavy duty flange type 75.75 Rupees Seventy

brass double compression type cable Five Paise

gland with rubber ring for PVC insulated Seventy Five

8 Nos 15 armoured cable complete with out going Only Ea

tails, insulating tape etc for following size of

cables.(B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type 38.38 Rupees Thirty

brass cable gland with rubber ring for PVC Eight Paise Thirty

insulated armoured cable complete with out Eight Only

going tails, insulating tape etc for following

size of cables.(c) 2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs 20.20 Rupees Twenty

conforming to IS suitable for cable of Paise Twenty

following size evenly crimped with high Only

24 Nos pressure tool & connected to switchgear Ea

terminals with brass/cadmium plated nut

bolts in an approved manner.(D) 35/50

(B) 10 sq.mm 13.13 Rupees Thirteen

17. Paise Thirteen

(C) 16/25 Sq.mm. 15.15 Rupees Fifteen

17. Paise Fifteen

Qty. Unit Item Per Amount

In Figure In Words

Supplying and erecting approved make 14913.66 Rupees Fourteen

Octagonal pole made from HR sheet steel. Thousand Nine

The pole should be made as per IS. and hundred Thirteen

shall be coated with hot dip galvanizing as Paise Sixty Six

per IS 2629/2633/4759, suitable suspend Only

local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to

be erected With Suitable foundation

164 Nos 18 (Included) as per details given by Ea

manufacturer considering site

requirement.(G) 8 Mtr. Long 70 mm Top X

155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M20

Bolts and 600mm long with necessary G.I. J

Bolts Approx Pole weight 84 kg

(Make:Transrail,Bajaj,Utkarsh,Ambica)

Providing and erecting street light pole 829.21 Rupees Eight

bracket comprising main B Class GI pipe of hundred Twenty

4.2 cm/require outside dia. complete with Nine Paise

suitable B Class G.I sleeve tubing of Twenty One

approx. 45cms.length and suitable for 76.5 Only

mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets

19. and having spread of 1 mtr. length with

a suitable rise as per site condition & suitable

welded stiffener reducer and nipple with

check nut complete painted with one coat

of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with

following nos of arms.[B] Double Arm

(C] Three Arm Bracket 1 Mtr. 1045.35 Rupees One

19. Thousand Forty

b Five Paise Thirty

Qty. Unit Item Per Amount

In Figure In Words

Supplying & erecting IP 55 grade following 3595.60 Rupees Three

size section pillar fabricated from joint less Thousand Five

M.S. Sheet with angle iron legs made from hundred Ninety

jointless M.S. Angle with cable clamps to be Five Paise Sixty

buried in ground to have appropriate Only

erection to work uniform until erected with

cement concrete foundation and 45 cm

high bricks work finishing with plaster etc.

hinged double door internally supported on

both side,with internal and outside looking

arrangement with look and keys in duplicate

35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt

for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three

tank powder coated paint. section pillar

roof should be without joint with water

leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 (B) 75 X 60 X

45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm

long made from 35 X 35 X 5 mm thick MS

Supplying & erecting approved make IP 55 13350.18 Rupees Thirteen

grade Company fabricated Timer Panel of Thousand Three

following capacity for switch On-Off street hundred Fifty

lights on time scheduling basis made from Paise Eighteen

16G CRCA sheet duly epoxy power painted Only

inside and outside with hinged doors and

locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input

and output Bakelite terminals and with door

earthing approved by Engineer in

charge.[B] 40 Amp

Qty. Unit Item Per Amount

In Figure In Words

Supplying and erecting LED street light / 5581.26 Rupees Five

Flood light fittings with High power White Thousand Five

LEDs wattage of 3 Watt and above hundred Eighty

assembled on single MCPCB, efficiency One Paise

more than 130 lm/w and corrosion free High Twenty Six Only

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED Ea

driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply

with over-voltage protection. (iii) 90 watts

(CaIII) Make: Philips

Crompton,Wipro,Jaguar,Havells. Fittings

should be NABL tested and certified.

Make:Crompton,Philips,C&S,Wipro,Have

I am / We are willing to carried out the work at ____% Above/below _____________________

______________________________________% (Should be written in figure and words) of the estimate

rates mentioned above. Amount of my/our tender work out as under.:

Estimated Amount Estimated Amount

Put to Tender Rs.________________ Put to Tender Rs.________________

(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with the local

situation regarding materials, labour and other factors pertaining to work before submitting tender.

(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed specification

and other tender document of this work and agree to execute the same accordingly.

Note 1) The Rates are The Rates are including all taxes, transport charges,storage charges,except GST

: and applicable GST will be paid.

2) The materials covered under contractor should be got approved from the Dy. Executive Engineer,

in charge of the work.

3) The materials and work shall have to be used and carried out as specification in technical note.

4) All works shall be carried out as per public works Department hand book and Other specifications

of the Dn. Or as directed.

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

deducted from the bill.

Qty. Unit Item Per Amount

In Figure In Words

6) The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy

Ex. Engineer as applicable.

7) The agency will have to agree to carried out the work as per brand demand of concern deptt.

8) Credit of Dismentalled Material to be retained by Agency & cost of Dismentalled Material

Rs.Nil will be recoverd from the bill.

(Signature of Contractor)

Special condition

As there is replacement warranty has to provide for LED fitting for 3 years, so security Deposit an amount

Rs.2,02,042/- will be released only after completion of warranty period or the replacement of defective LED fitting

whichever is later. Further after issuing the notice to the contractor for replacement of defective material, he has to

take up the work of replacement within 10 days from the date of issuing the said notice, in case where the delay for

replacement, the contractor shall be penalized by Rs. 100/- per day for such delay. In case of non replacement of the

defective material action will be taken against the contractor to keep his registration in abeyance for three years and

his full security deposit will forfeited to the Government.

Executive Engineer

Godhra Electrical Division,

R&B Deptt. Godhra