Civil Modification Work For Lime Storage Building In Neutralization Plant (NP), at TTPL

Site clearing

Clearing of Site,removal of debris and cutting of shrubs and dumping the waste materials to dump yards etc, complete as per the direction of Engineer in charge.

Demolishing of block work

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineers-in- charge. In cement mortar

Demolishing of RCC work

Demolishing R.C.C. Work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer-in-charge

Earth excavation work

Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth ,1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, the lead up to 50 m and lift up to 1.5 m, disposed the earth to be levelled and neatly dressed (all kinds of soil)

Rubble work

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6 coarse sand : 12 graded stone aggregate 20mm nominal size)up to plinth level with: Cement mortar 1:6(1 cement:6 coarse sand)

Back filling

Back filling available Earth from the TTPL Premise, from the open well area .Including cost of transportation and compaction in various stages of level below plinth level complete as per the direction of Engineer in charge

Providing and laying of PCC

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:4:8( 1 cement:4 coarse sand :8 graded stone aggregate 40 nominal size)

Providing and laying of RCC

roviding and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforced-All work up plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size )

Shuttering work

Centering and shuttering including strutting, etc. and removal of form for : Foundations, footings, bases of columns, etc for mass concrete

TMT Steel work

Steel reinforcement for R C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and medium Tensile steel bars

Plastering work

12mm cement plaster of mix:1:4(1 cement:4 fine sand)

Building painting

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: two or more coats applied on walls @ 1.25 ltr /10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Structural steel work and roofing

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work , including cutting, hoisting, fixing in position all complete as per the direction of engineer in charge

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface,etc. complete on steel work

Providing non-asbestos high impact polypropylene reinforced cement 6 mm thick corrugated sheets ( as per IS :14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts, 8 mm dia G.I plain and bitumen washers or with self drilling fastener and EPDM washers etc complete ( excluding the cost of purlins, rafter and trusses) including cutting sheets to size and shape wherever required