General Civil Maintenance Work of 04 Underground Metro Stations (i.e. Kankaria East, Kalupur Railway, Gheekanta and Shahpur Metro Stations) Tunnel Section & Ramp Area of East-West Corridor Underground Section from Apparel Park Station Ramp to Shahpur Station of Ahmedabad Metro Rail Project Phase - 1

BILL OF QUANTITIES

1.0 The Bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers,

Special Conditions of contract, Scope of Work, Technical Specifications etc.

2.0 Schedule ‘A’ consists of DSR items for Civil works as detailed in Tender documents. Tenderer has to quote

percentage above/below/at par the rates against BOQ amount given in Schedule ‘A’.

3.0 Schedule ‘B’ consists of Non DSR items for Civil works as detailed in Tender documents. Tenderer has to

quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘B’

4.0 The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’, ‘B’ are for completed

and finished items of works and complete in all respect. It will be deemed to include cost of all plants,

labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification,

contractor’s profit, taxes and establishment/overheads, together with preparation of design and drawings,

all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the

5.0 The Summary Sheet of Bill of Quantity is given in Annexure – 1. The bidder may note that the quote shall

be inclusive of all taxes. The tax bifurcations is to be given in Annexure – 2 of the BOQ.

6.0 If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-

responsive and shall be rejected.

7.0 Tenderers shall quote their offer in Indian Rupees (Rs.) only. Tenderers are required to quote percentage

(%) above/below/at par in figures in the appropriate highlighted cell in the summary sheet.

8.0 Errors will be corrected by the employer for any arithmetical errors in computation or summation as per

contract conditions.

9.0 All the unit rates/ percentages should be filled in figures. In case of any discrepancy, the value provided in

words shall be treated as sacrosanct.

10.0 The work executed against all the BOQ items in Schedule ‘A’ & ‘B’ as detailed in tender document would be

paid on measurement basis.

11.0 The contractor may raise their “On Account” payments on monthly basis as per the status of work on the

last day of the respective month.

12.0 In case of Schedule A item the description is given in brief and detailed description of item should be as

given in respective ie., DSR, AMC SOR, R&B SOR.

13.0 The financial bid is to be submitted online on https://tender.nprocure.com. The other relevant clauses of

submission of bid is clarified in ITT, Para / Clause D1 to D11

GMRC 2026 Page 2 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

FINANCIAL BID FORM

To : The Managing Director,

Gujarat Metro Rail Corporation (GMRC) Limited

Address : Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar: 382010, Gujarat, India

Name of work: -“General Civil Maintenance Work of 04 Underground Metro Stations (i.e.

Kankaria East, Kalupur Railway, Gheekanta and Shahpur Metro Stations) Tunnel Section &

Ramp Area of East-West Corridor Underground Section from Apparel Park Station Ramp to

Shahpur Station of Ahmedabad Metro Rail Project Phase - 1.”

1. Having examined the site of works and Bid Documents, comprising Instructions to Bidders, Scope of

works, Conditions of Contract, Technical Specifications, Bill of Quantities I/we, the undersigned offer to

execute and complete such works and remedy any defects therein in conformity with the said bid

documents for the sum of Rs. (Refer Annexure – 1 ) or such other sum as may be ascertained in

accordance with the said Bid documents.

2. We undertake, if our Bid is accepted, to commence the work from issuance of LOA / receipt of the

order to commence the work, and to complete and deliver the sections and whole of the works

comprised in the Contract within the period (i.e. 24 Months) stated in the bid hereto.

3. If our Bid is accepted, we will furnish Performance Security (ies) in the form of a Bank Guarantee to be

jointly and severally bound on us, in accordance with the Conditions of Contract.

4. We agree to abide by this Bid for the period of One Hundred & eighty (180) days from the last date

fixed for Bid Submission and it shall remain binding upon us and may be accepted at any time before

the expiry of that period.

5. We confirm our agreement to treat the Bid documents and other records connected with the works as

secret and confidential documents and shall not communicate information contained therein to any

person other than the person authorised by the Employer or use such information in any manner

prejudicial to the safety and integrity of the works.

6. Unless and until an agreement is prepared and executed, this Bid, together with your written

acceptance thereof, shall constitute a binding Contract between us, but without prejudice to your right

to withdraw such acceptance without assigning any reasons thereof.

7. We understand that you are not bound to accept the lowest or any bid you may receive.

We attach herewith proof of submission of income tax returns along with profit & loss statement attached

with tax returns.

Yours faithfully,

Authorised Signature :

GMRC 2026 Page 3 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Tender Notice No. : GMRC/CIVIL MAINTENANCE/UG/PH-1/2026

“General Civil Maintenance Work of 04 Underground Metro Stations (i.e. Kankaria East, Kalupur Railway,

Name of Works Gheekanta and Shahpur Metro Stations) Tunnel Section & Ramp Area of East-West Corridor Underground

Section from Apparel Park Station Ramp to Shahpur Station of Ahmedabad Metro Rail Project Phase - 1.”

Annexure – 1 (i.e. Summary Sheet of Bill of Quantity)

Rate to be Quoted by the Tenderer

Sr. No Schedule

In Figures In Words

(% above/below) (% above/below)

(DSR/SOR Items)

(Non DSR Items)

Total Amount (INR) In Figures

Total Amount (INR) In Figures

(Inclusive of all taxes)

1.0 The tenderer shall quote a single percentage (Above/Below/At Par ) at SN. 1 & 2 of this Summary Sheet only and nowhere else.

2.0 The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be inclusive of all taxes.

3.0. The tax bifurcations to be filled in Annexure – 2 (i.e. Details of Taxes and Duties).

GUJARAT METRO RAIL CORPORATION

Bill of Quantity

GMRC 2026 Page 4 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

“General Civil Maintenance Work of 04 Underground Metro Stations (i.e. Kankaria East, Kalupur Railway, Gheekanta and

Shahpur Metro Stations) Tunnel Section & Ramp Area of East-West Corridor Underground Section from Apparel Park Station

Ramp to Shahpur Station of Ahmedabad Metro Rail Project Phase - 1.”

SN. Schedule - A Unit Qty Rate Amount

1. All item of work which are not covered in BOQ but are required to be carried out as

per direction of Engineer, will be based on list of concerned item as available in latest

Schedule of Rates (SOR) of work.

i. Schedule of Rates DSR -2023 CPWD

ii. Schedule of Rates of SCHEDULE OF RATES FOR BUILDING WORKS AHMEDABAD CITY

(AMC) YEAR:-2023-24 issued by GOVERNMENT OF GUJARAT ROAD AND BUILDING

iii. SCHEDULE OF RATES FOR BUILDINGS, ROADS & BRIDGES WORKS OF AHMEDABAD

DISTRICT for the year 2023-24 of Road & Building (R&B) Department of Government

Note: The order of preference for adopting the Rates will be in accordance with as first

preference being at (i) and the last preference being at (iii) above, till the availability

of concerned items in the respective schedule of Rates.

Total of Schedule-A

GMRC 2026 Page 5 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Schedule - B (NDSR Items)

Sr No Sub-Schedule - B.1 (Doors/Windows/Railing) Unit Rate

Providing & fixing 10mm dia stainless steel tower bolt 200mm

1 NDSR-1 long with all screws etc. complete as directed by engineer in Each ₹

Providing & fixing of stainless steel L-drop 12 inch with all nuts,

screws drilling by employing skilled carpenter in non-fire door

2 NDSR-2 along with a pad lock (pad lock make; Harrisons or its equivalent) Each ₹

all complete as per the direction of Engg-in-charge.

Providing and fixing stainless steel D-shaped door handle as

confirming to grade 304.(Minimum length of 200 mm to 250mm,

3 NDSR-3 Make-dorma or equivalent) complete as per direction of Each pair ₹

engineer in charge.

Providing and fixing chromium plated brass 100mm mortice

4 NDSR-4 latch and lock with 6 levers and a pair of lever handles of Set ₹

approved quality with necessary screws etc. complete.

Providing and fixing panic bar / latch (Double point) fitted with a

single body, Trim Latch & Lock on back side of the Panic Latch of

5 NDSR-5 reputed brand and manufacture to be approved by the Engineer- Nos ₹

in- charge, all complete.

Providing and fixing Aluminium door stops/wall stoppers to

6 NDSR-6 flush doors or panelled solid and glazed doors, etc., complete as Each Shutter ₹

per drawings and directions of engineer in charge.

GMRC 2026 Page 6 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer (having brand logo with ISI,

IS : 3564, embossed on the body, door weight upto 36 kg to

7 NDSR-7 kg and door width from 701 mm to 1000 mm), with double each ₹

speed adjustment with necessary accessories and screws etc.

Providing & fixing EL Bihari hinge in aluminium door /window

8 NDSR-8 Each Set ₹

Providing & fixing of aluminium handle set with locking

arrangement for aluminium window shutter as per approved

9 NDSR-9 quality with required screws complete as per direction of Each ₹

Engineer-in-Charge.

Providing and fixing of high pressure laminated board confirming

to code BS EN-438-2015 of 12mm thickness for partition and

doors with all necessary fittings, fasteners, screws and rubber

10 NDSR-10 strip for the groove in the plaster for reducing noise level of door Sqm ₹

closing etc. required as per approve design and colour, complete

as per direction of engineer in charge.

Spraying and applying aldrine for anti-termite treatment of wall

doors and wooden cupboard /almirah and kitchen cabinet.

Aldrine to be sprayed on wall by making hole using drilling

machine and on doors & wooden cupboard/almirah and kitchen

cabinets by injection/gun/applicator. Work will be carried out in

11 NDSR-11 presence of qualified supervisor to ensure safety of applicator Each ₹

and other staff as well as residents of the flats. Rates are

inclusive of all required material, machine, gun and all skilled and

unskilled labour, lead and lift, ascent-decent complete as per

direction of Engineer-in-Charge.

GMRC 2026 Page 7 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical diluted

12 NDSR-12 with 5 liters of water application 0.5 litre chemical /Sqm of SMT ₹

surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As

13 NDSR-13 Per6131_paret-II Consentration Weight one percent is SMT ₹

recommended i.e one litre 20 EC chemical emulsion with 19 liter

give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical

14 NDSR-14 emulsion diluted with 19 liter oil base. Total solution will be 20 SMT ₹

liters inclusive of one liter chemical emulsion application at the

rate of 7.5 litre chemical / Sqm of surface is recommended as per

GMRC 2026 Page 8 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

15 NDSR-15 Kg ₹

required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-in-charge,

(for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts,

bolts, steners etc.).

Providing and fixing hand rail of approved size by welding etc. to

steel ladder railing, balcony railing, staircase railing and similar

16 NDSR-16 works, including applying priming coat of approved steel primer. Kg ₹

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

17 NDSR-17 in position and applying a priming coat of approved steel primer, Kg ₹

including welding and bolted with special shaped washers etc.

complete. Hot finished welded type tubes

Sr No Sub-Schedule - B.2 (Toilet/Washroom/Plumbing/PHE) Unit Rate

Providing and fixing of CI grating 200x200 mm with all required

18 NDSR-18 materials and labour complete as per direction of Engineer-in- Each ₹

Charge, nothing shall be paid extra.

Providing and fixing Floor trap Stainless Steel jali over existing

19 NDSR-19 Nos ₹

GMRC 2026 Page 9 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing white vitreous china pedestal type water

closet (European type )with seat and lid, 10 litre low white

various china flushing system & C.P flush bend with fittings & C.I

Basets, 40mm flush bend, overflow arrangement with special of

20 NDSR-20 standard make and mosquito proof coupling of approved Each ₹

municipal design complete , including painting of fittings and

brackets, cutting and making good the walls and floors wherever

Providing and fixing Flushing Cistern (Make - Hindware or

21 NDSR-21 Each ₹

Equivalent) Cat. No.

Providing and fixing wash basin with C I brackets, 15 mm C. P.

brass pillar taps, 32mm C.P. brass waste of standers pattern

including painting of fittings and brackets , cutting and making

22 NDSR-22 good the walls wherever require. White Vitreous China wash Each ₹

basin size 630x450 mm with a pair of 15mm Cc.P brass pillar taps

Providing and fixing Angle Valve (Make - Jaquar or Equivalent)

23 NDSR-23 Each ₹

Code: FLR-5053N

Providing and fixing Bib Cock (Make - Jaquar or Equivalent) Code:

24 NDSR-24 Each ₹

Providing and fixing Pillar Cock (Make - Jaquar or Equivalent)

25 NDSR-25 Each ₹

Providing and fixing of jet spray with flexible tube made of Volga

26 NDSR-26 Each ₹

or approved quality.

Providing and fixing of bib cock with health faucet with flexible

pipe of appropriate length with a separate stop cock for the

27 NDSR-27 health faucet. The cost to include all fittings and fastenings all Each ₹

complete as required

GMRC 2026 Page 10 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing PVC Connection (Make - Jaquar or

28 NDSR-28 Each ₹

Equivalent)Code: ALD-805

Providing and fixing white vitreous china flat back or wall corner

type lipped front urinal basin of 430x260x350 mm size with

automatic flushing cistern with standard flush pipe and C.P brass

29 NDSR-29 spreaders with brass unions and GI clamps complete, including Each ₹

painting of fittings and each brackets cutting and making good

the walls and floors wherever required. One urinal wash basin

with 5 litre white PVC automatic flushing cistern

Providing and Fixing of WC seat Cover , complete with all

30 NDSR-30 accessories required as per direction of Engineer-in-charge. Each ₹

CERA make (B1510108) or equivalent

Cleaning of chocked sewer line by diesel running vehicle

mounting hydraulic operated high pressure suction cum jetting

sewer cleaning machine fitted with pump having 4000 litres

suction capacity and 6000 litres water jetting tank capacity

including skilled operator, supervising engineer etc. for cleaning

31 NDSR-31 Metre ₹

and partial desilting of manholes and dechocking of sewer lines.

Dechocking and flushing of sewer line from one manhole to

another by high pressure jetting system of 2200 PSI for sewer

line from 150 mm dia upto 300 mm

Testing of potable water as per the standard of local (As per IS

32 NDSR-32 10500) water supply authority (I/c supplying of water sample to Each ₹

the laboratory) and providing the sample test report to EIC.

GMRC 2026 Page 11 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Cleaning of underground water tank of all the sections/Capacity

of tank by emptying of water in other tanks or in a separate

storage device to avoid the wastage of water. The rates are

inclusive of all taxes, men, materials, safety equipments and

33 NDSR-33 other required resources. Nothing shall be paid extra and work Per Tank ₹

shall be paid extra and work shall be carried out as per direction

of Engineers in charge. The tank shall be cleaned on half yearly

basis and report shall be submitted to GMRC.

Cleaning of terrace/loft water storage tank (inside surface area)

upto 2000 litre capacity at all heights with coconut brushes,

duster etc., removal of silt, rubbish from the tank and cleaning

the tank with fresh water disinfecting with bleaching powder @

0.5gm per litre capacity of tank including marking the date of

cleaning on the side of tank body with the help of stencil and

paint and disposing of malba all complete as per direction of

34 NDSR-34 Engineer-in-Charge. (The old date already written on tank should litre ₹

be removed with paint remover or black paint and if date is not

written with the stencil or old date is not removed deduction will

be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or

ball cock is damaged that is to be repaired by contractor

at his own cost and nothing extra will be paid on this account)

GMRC 2026 Page 12 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing UPVC soil and waste pipes ISI marked / SWR

with solvent cement / rubber ring joints and further protected

with fibreglass paste, including all specials such as bends, tees,

reducers etc with or without door as required, including any

35 NDSR-35 cutting and making good of floors / walls that may be necessary,

clamps and stays as per requirements. The pipes laid above the

floor level (sunken level) should be rigidly fixed with PCC bedding

and levelled at every one metre intervals

36 NDSR-35.1 [A] 50mm Dia 6 Kg/cm2 Rmt ₹

37 NDSR-35.2 [B] 75mm Dia 6 Kg/cm2 Rmt ₹

38 NDSR-35.3 [C] 110mm Dia 6 Kg/cm2 Rmt ₹

39 NDSR-35.4 [D] 160mm Dia 6 Kg/cm2 Rmt ₹

PVC PIPE 160 MM: Providing and laying 160mm dia & 6kg

40 NDSR-36 pressure PVC pipe for drainage, all work complete as directed by Rmt ₹

engineer in charge. (make - as per approved list).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of

pipes & fittings with one step CPVC solvent cement, trenching,

41 NDSR-37 refilling & testing of joints complete as per direction of Engineer

in Charge.External work

42 NDSR-37.1 [A] 15 mm. Rmt ₹

43 NDSR-37.2 [B] 20 mm. Rmt ₹

44 NDSR-37.3 [C] 25 mm. Rmt ₹

45 NDSR-37.4 [D] 32 mm. Rmt ₹

46 NDSR-37.5 [E] 40 mm. Rmt ₹

GMRC 2026 Page 13 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

47 NDSR-37.6 [F] 50 mm. Rmt ₹

Providing and fixing PVC P-trap /multi-trap /Nahani-trap of

110mm dia for kitchen /bathroom with demolishing of kota

stone/cement concrete flooring of required area or up to

sqm for rectification of seepages and repairing the same as

48 NDSR-38 above, including the cost of materials i.e. PVC P-trap/multi- Each ₹

trap/Nahani trap, solvent, piece of PVC pipe, Kota stone, cement

concrete or other materials, labour charges, taxes etc. complete

as per direction of Engineer-in-charge.

Providing and fixing UPVC/CPVC ball valve of approved quality,

49 NDSR-39 High or low pressure ,with plastic floats complete as directed by

engineer in charge.

20 mm nominal bore

50 NDSR-39.1 Each ₹

25 mm nominal bore

51 NDSR-39.2 Each ₹

32 mm nominal bore

52 NDSR-39.3 Each ₹

40 mm nominal bore

53 NDSR-39.4 Each ₹

50 mm nominal bore

54 NDSR-39.5 Each ₹

65 mm nominal bore

55 NDSR-39.6 Each ₹

GMRC 2026 Page 14 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Mirror of staff toilet - Providing and fixing toilet mirror made of

6mm thick BWP ply with craft paper fixed to wall with

56 NDSR-40 screws/wooden plugs 5mm thick float glass mirror etc. including Sqm ₹

all necessary arrangement complete as per direction of engineer

in charge. (Make - as per approved list).

Providing and fixing vitreous toilet paper holder of vitr with

57 NDSR-41 mortar / white cement with all fittings and fastenings all Nos ₹

complete as required

Providing and fixing of CP grab rail in PWD Toilet. The cost to

58 NDSR-42 Nos ₹

include all fittings and fastenings all complete as required

Providing and fixing Urinal Partition of 20mm thick of approved

59 NDSR-43 material granite as specified. The cost shall include all fittings and Nos ₹

fastenings all complete as required

Providing and fixing automatically operated Hand Dryer with in-

60 NDSR-44 built heating unit and twin blowers of NovoTech or equivalent Nos ₹

Supply and Fixing PVC floor trap 125 x 75mm self-cleansing

design with or without vent arm, Inlet receiving cap of 50 &

61 NDSR-45 40mm dia complete Including cutting and making good the walls Nos ₹

Supply of materials & Constructing brick masonry Rain Water

Chambers with !!. 'A' class Table Molded bricks in cement

62 NDSR-46 mortar 1:S (1 cement: 5 fine sand), !. R.C.C. Top slab"wlth 1:2:4

Mix (1 Cement: 2 coarse sand: 4 graded stone ,s aggregate),

foundation concrete

63 NDSR-46.1 Inside size of 600 x 600 depth of 600mm with RCC cover Each ₹

GMRC 2026 Page 15 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Supply installation testing and commissioning water cooler

having nominal cooling capacity of 40 liters per hours, with

liters storage tank with 2 nos. of faucets, one no goose neck type

(for glass filling) and other one fountain type {for drinking} both

64 NDSR-47 with separate mechanical lever control with 1.5 HP electric otor Set ₹

for compressor to work on one phase 230 volts SO Hz AC power

supply WI th complete accessories including cutting and making

wall as required.

Sr No Sub-Schedule - B.3 (ACP/Rolling Shutter) Unit Rate

Providing and fixing (Aluminium Composite Panel) Sheet any

colour on existing frame as per requirement all complete in all

65 NDSR-48 respect as per direction and satisfaction of Engineer-in-Charge sqm ₹

4mm thick ACP (FR grade) of Aludecor ALAS color AD09

Annual repairing and maintenance of exixting rolling shutters

including dismentaling shutter and refinig the same and fixing of

new items as per requirement including

cleaning,oiling,greasing,alignment and testing complete.The cost

66 NDSR-49 of new items will be paid separatly except small hardware like Each ₹

nuts/bolts and nails which are included in this item.The scopre of

work includes checking of shutters for smooth functioning

quarterly or as & when requires in emergency.

Providing hardware or other parts for smooth functioning of

67 NDSR-50 rolling shutter, items will be supplied as per CPWD

specifications.

68 NDSR-50.1 Brackets (sides) Each ₹

69 NDSR-50.2 Wire spring Each ₹

GMRC 2026 Page 16 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

70 NDSR-50.3 Spring holder Each ₹

71 NDSR-50.4 MS-Gararee device Each ₹

72 NDSR-50.5 Gear -Box Each ₹

73 NDSR-50.6 Rolling shutter Handle Each ₹

74 NDSR-50.7 Locking Naka/Kundee including welding Each ₹

75 NDSR-50.8 Ball Bearing Each ₹

76 NDSR-50.9 Gararee Rod Each ₹

77 NDSR-50.10 MS-Top Cover Mtr ₹

78 NDSR-50.11 Bottom Locking rail Mtr ₹

79 NDSR-50.12 M.S. Lathe Mtr ₹

80 NDSR-50.13 MS pipe shaft 2" dia Mtr ₹

81 NDSR-50.14 Side guide rail Mtr ₹

82 NDSR-50.15 MS Grill (for existing pattern) Sqm ₹

83 NDSR-50.16 Rolling shutter lever lock Each ₹

Oiling & greasing, repairing and welding of rolling shutter with

84 NDSR-51 accessories fittings all work completed as per direction of Each ₹

engineer in charge.(Accessories will be paid extra).

Sr No Sub-Schedule - B.4 (Carriage/Disposal) Unit Rate

Supply of canter on hire charges basis, for carriage of any

85 NDSR-52 Each ₹

material from metro stations to GMRC depots.

Clearing grass / bushes from ground level with the help of tractor

mulcher assembly/talwar/ hand held grass / bush cutting

machine including machine operator, fuel and all kind of blades

6 NDSR-53 required for cutting grass stems of bushes upto 5 cms dia at a Sqm ₹

height of 15 cms from ground level and disposal of material so

cleared within 50m lead and as per satisfaction of E-I-C.

GMRC 2026 Page 17 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Disposal of Malba away from the premises through Dumper.

87 NDSR-54 Per Trip ₹

Rates are for each trip. (Minimum quantity of Malba = 8 cum).

Sub-Schedule - B.5 (Core Cutting/Expansion Joint/Grouting/Cold

Sr No Unit Rate

Bitumen/Waterproofing/PCC)

88 NDSR-55 Core cutting as per direction of engineer incharge

a) Core cutting work in RCC structure(Vertical as well as

89 NDSR-55.1 Inches Depth ₹

horizontal) -50 MM

b) Core cutting work in RCC structure(Vertical as well as

90 NDSR-55.2 Inches Depth ₹

horizontal) -100 MM

Providing and fixing Hilti Chemical fastener HIT-V-5.8,

M12x220mm of 12mm dia. including injecting HIT-RE 500 V3

chemical grout using injection gun including drilling of hole in

91 NDSR-56 RCC, concrete or brick masonry, cleaning the hole with pump, Each ₹

fixing the fastener, injecting the chemical etc. as per direction of

Engineer-in-Charge (Work during block hours in night) rates are

inclusive of GST and Carriage.

Providing, cutting and fixing Hilti chemical fastener M16x200mm

with HILTI chemical grout RE 500 V3 including drilling of hole in

RCC, Concrete or brick masonary, cleaning the hole with blow

92 NDSR-57 out pump, fixing the fastener with chemical grout using chemical Each ₹

injecting gun etc. complete as per direction of Engineer-in-

Applying bonding agent on old surface of concrete including

93 NDSR-58 cleaning and preparation of surface with all T&P. (make - as per per set ₹

approved list ).

GMRC 2026 Page 18 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Expansion Joint: Compression seal joint

Providing and installing compression seal joint confirming to

specification including provision of edge beams at end edges of

94 NDSR-59 both at joining precast diaphragm segments, cast in situ units RM ₹

and all related operations as required to complete the work as

specified in specifications.

Cleaning of existing joints (Expansion dummy and construction

joints) by removing old existing sealing compound by kerosene

oil, drying with blow lamp and filling again with Polysulphide

95 NDSR-60 Sealant of approved make including painting the sides of slabs Mtr ₹

with primer of approved make complete as per satisfaction of

Engineer-in-charge.

Providing , placing and pasting Silicone Sealant WX of approved

make for sealing the surface of concrete to aluminium,

aluminium to glass , aluminium to aluminium, aluminium to

96 NDSR-61 masonry surface etc. With preparing the surface and placing the Mtr ₹

sealent with the help of gun ,complete in all respect as per

satisfaction of E.I.C.

Providing and pasting of Sika multiseal tape 100 mm wide at all

97 NDSR-62 locations including all T&P, labour etc for cleaning the surface, Mtr ₹

applying the tape all complete as per direction of EIC.

Providing and supplying CICO Grout V1, premixed ultra high

98 NDSR-63 strength non-shrink cementitious grout or equivalent as Bag ₹

approved by Engineer-in-Charge.

Supplying of micro concrete chemical in 25 kg per bag make as

99 NDSR-64 Each ₹

per approved list of GMRC.

Supplying Cold Bitumen to site as per per dirction of Engineer-in-

100 NDSR-65 Each Bag ₹

GMRC 2026 Page 19 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing, mixing and applying SBR polymer (of approved make)

modified Cement mortar in proportion of 1:4 (1 cement:

graded coarse sand with polymer minimum 2% by wt. of cement

used) as per specifications and directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of

thickness shall be done just after the surface preparation is

101 NDSR-66 completed and Payment under this item shall be made only after

proper wet curing has been done and surface has been

satisfactorily evaluated by sounding / tapping with a blunt metal

instrument and/or the 75mm size cube crushing strength at the

end of 28 days to be not less than 30 N/Sqmm2).

102 NDSR-66.1 12 mm average thickness. Sqm ₹

103 NDSR-66.2 25 mm average thickness in 2 layers. Sqm ₹

PROVIDING AND LAYING SBR POLYMER AND CEMENT MIXTURE

104 NDSR-67 Sqm ₹

PROVIDING AND LAYING APP MODIFIED POLYMERIC MEMBRANE

105 NDSR-68 (3 MM THICK, REINFORCED WITH GLASS FIBRE MATT) Sqm ₹

Providing and applying polysulphide sealant including cost of

106 NDSR-69 backer rod and application of primer of different location as per RM ₹

direction of Engineer-in-Charge for groove of size 80mm width

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural

107 NDSR-70 sources : 8 graded stone aggregate 40 mm nominal size derived Cum ₹

from natural sources)

GMRC 2026 Page 20 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and injecting Dr. fixit or fosroc PU foam injection two Per kg

component polyurethane foam injection grout manufacture to

the site mixed in ratio 10:1 ( 10 part base 01 part hardener ) that

shall be injected mechanically piston driven pump with

maximum pressure upto 250 bar or foam shall be based on MDI (

Methylene Diphenyl Isocyanate ) polyurethane pre-polymer and

accelerator. The system shall reacts when it comes in contact

with water , producing a relatively stiff and inert polyurethane

108 NDSR-71 foam . it is 10% solid and solvent free polyurethane grout for ₹

quick temporary closing and sealing of water bearing crack,

cavity and teak under hydrostatic pressure. The system shall

foams to 30 - 40 times its its volume in the presence of water

and can be effective means of arresting running water and

seepage. Rate inclusive of providing , fixing, cutting, of non

return packers of required size and repairing the surface of

polymer mortar complete at all heights.

Providing and injecing Dr fixit or fosroc PU plain injection, two Per kg

componant polyurethane plain injection grout manufactured and

to be site mixed in ration 2:1 ( 2 part base 01 part hardener ) that

shall be injected with mechanically piston driven pump with

maximum pressure upto 250 bars or as per requirement of site

at the distance of 300 mm C/C in all direction. The PU plain shall

109 NDSR-72 be low vicosity, high penetration, quick setting and should ₹

perform tough and flexible polyurethane rubber after complete

chemical reaction with or without water. Rate inclusive of

providing , fixing, cutting, of non return packers of required size

and repairing the surface of polymer mortar complete at all

GMRC 2026 Page 21 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and cutting V groove 5mm*7mm at cracks area and fill m

110 NDSR-73 with Epoxy mortar Nitomortar S or equivalent material (only RCC ₹

structure) (valid for crack width 0.5mm to 2mm)

Providing working platform of required strength, upto 6 m Sqm

height.(Working platfrom will be placed and removed every night

111 NDSR-74 in the tunnel. Item is inclusive of placing and removing on every ₹

night or as per requirement.)

Sr No Sub-Schedule - B.6 (Glass Work) Unit Rate

Providing & fixing in position glass

113 NDSR-75.1 5 mm thick heat reflecting glass Sqm ₹

114 NDSR-75.2 Extra for toughening 5 mm thick clear float glass Sqm ₹

Providing and fixing 6mm-10mm thick clear float glass in

aluminium door, window, ventilator, shutter and partitions etc.

115 NDSR-76 with PVC and neoprene gasket etc. complete as per architectural Sqm ₹

drawing and as per the directions of engineer in charge. (make -

as per approved list)

Providing and fixing of structural toughened glass 13.52 mm(

6.00+1.52+6.00) in all locations of metro stations including the

cost of sealing gaps with clear / coloured sealant / silicon of

116 NDSR-77 approved make and brand, cutting of groove (wherever required Sqm ₹

) including fixtures & fitings etc. complete as per site

requirement. ( make- as per approved list)

GMRC 2026 Page 22 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and replacing 1000 mm TO mirror, covered with

powder coated covering having sun shade to existing hanging

member support from station roof/floor at the location as

117 NDSR-78 directed by Engineer- in - charge. Rates are inclusive of all Each ₹

material, labour, scaffolding, cartage and all taxes etc. all

Providing and fixing toughened glass in partitions ,doors, faced,

counter etc. supported at bottom and sides with all necessary

fitting and fixture of approved make the glass to be fixed in

wall/S.S pipe/M.S framed structure as per approved design

complete as per direction of EIC(frame work and fittings to be

paid separately and for payment glass area only will be

119 NDSR-79.1 a) 12 mm thick toughened glass Sqm ₹

120 NDSR-79.2 b) 10 mm thick toughened glass Sqm ₹

121 NDSR-79.3 c) 8 mm thick toughened glass Sqm ₹

122 NDSR-79.4 d) 6 mm thick toughened glass Sqm ₹

Sr No Sub-Schedule - B.7 (False Ceiling/Flooring/Granite) Unit Rate

GMRC 2026 Page 23 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing tiled false ceiling of approved materials of size

x 595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections (galvanized @ 120 grams

/sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to ger required length and of size 24 x 38 mm made from

0.30mm thick (minimum) sheet, spaced at 1200mm centre to centre to

form a grid of 1200 x 600mm and secondary cross "T" of length 600mm

and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200 x 600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3mm and laying false

ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to be suspended from

ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling

with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable

rods with galvanised butterfly level clips of size 85x30x0.8mm spaced

NDSR-80 at 1200mm centre to centre along main T, bottom exposed width of 24 Sqm ₹

mm of all T-sections shall be pre-painted with polyester paint, all

complete for all heights as per specifications, drawings and as directed

by Engineer-in-charge. Providing and fixing of Flex alum metal tile

ceiling system manufactured by M/s. Hunter Douglas India Pvt. Ltd or

equivalent comprising of tile of 600 mm wide and 600 mm long

manufactured out of 0.50mm thick GI perforated for desired openings

and patterns giving a 22% open area. The tile will be manufactured on

advanced equipment that includes several levelling stages in the

manufacturing process. Tile ends will be raised with pips and stops to

ensure positive engagement into the spring to enable for de-mounting

of individual panels. The tile sides will be sufficiently high to ensure a

minimum deflection across the length of tile. All tiles will be bevel

edged. The tile shall be polyester based, powder coated in white

colour. The tiles shall be clipped into clip in profile of 0.50 mm thick

G.I. The clip in profile shall be supported from slab by means of rigid

suspension of 4 mm G.I. rod hold on clamps with clip.

GMRC 2026 Page 24 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing aluminium lineal ceiling using 84 mm x

mm deep, aluminium alloy AA 3105 with panel ceiling, type 84 R

Exterior grade, manufactured by Hunter Douglas/ Interarch

Building Products Ltd. or approved equivalent in approved colour

and enamelled aluminium panel carriers of satin black colour,

panel carriers suspension system, including cut-outs and

additional framing around light fixtures, grilles, diffusers, access

124 NDSR-81 panels, etc. all as per specifications and as directed complete. sqm ₹

Rates shall be inclusive of linear cell panels, Horizontal and

vertical suspension, Grid elements, Perimeter trims, Carriers,

wire clips and all other accessories etc. complete inclusive. The

carrier spacing shall not exceed 1 metre centre to centre and

these will be suspended at every 800 mm centre to centre. It

includes a. Coil Coated finish or b. Powder coated finish

Providing and fixing in position GI Gutter of 2mm thick sheet of approved

quality including fabrication and erection with self tapping screws epdm

washers with necessary laps and stiffeners, application of sealant, making

provision for drainage spout with all leads and lifts etc. Complete as per

125 NDSR-82 Sqm ₹

drawing and specifications. ( Measurement to be as per profile area)

GMRC 2026 Page 25 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing removable raised/ false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50mm, comprising of modular load bearing floor panels supported on

G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting

of:a) Providing at required spacing to form modular frame work, pedestals made out of

GI tube of thickness minimum 2 mm and 25mm outer diameter, fully welded on to the

G.I. Base plate of size 100mm X 100mm X 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mm x 75mm x 3.5mm welded with GI fully threaded stud

16mm outer diameter with two Gi check nuts screwed on the stud for level adjustment

upto 50mm, locking and stabilizing the pedestal head in position at the required level.

The pedestals shall be fixed to the subfloor (base) through base plate using epoxy

based adhesive of approved make or the machine screw with rawl plug.b) Stringers

system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the

pedestals head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal dns stringer assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for access floor panel, the

system shall provide a minimum clear uninterrupted clearance between the bottom of

126 NDSR-83 the floor for electrical conduits and wiring etc. all complete as per the architectural

drawings, as specified and as directed by the Engineer-in-charge.c) Providing and fixing

Access Floor panel of 600x600x32 mm medium grade Filled steel antistatic high

pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded

construction with an enclosed bottom pan with uniform pattern of 64 hemispherical

cones. The top and bottom plates of steel Gauges : top 0.6mm and bottom 0.7mm

fused spot welded together (minimum 64 welds in each dome and 20 welds along each

flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyro grip non-combustible

Portland cementitious core mixed with lightweight floaming compound. The access

floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface flatness within

075mm. The panel is to withstand a Concentrated Load of 363 kgs applied on area

25mm X 25mm without collapse in the panel which is placed on four steel blocks. The

panel will withstand and Uniformly Distributed Load (UDL) minimum 1500 kg/sqm and

an impact load of 50kg all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge. All specification must be printed on the

side of the panel to ensure the quality of the product.450 mm Finished Floor Height

GMRC 2026 Page 26 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing 10 mm thick acid and / or alkali resistant

vitrified tiles of approved make and colour using acid and /or

alkali resisting mortar bedding and joints filled with acid and / or

127 NDSR-84 alkali resisting cement as per IS:4457 complete as per the Sqm ₹

direction of Engineer-in-charge. For flooring on a bed upto

mm thick mortar 1:4 (1 appropriate cement : 4 coarse sand).

Providing and laying tactile tile (for vision impaired persons as

per standards) of size 300x300x9.8mm having with water

absorption less than 0.5% and conforming to IS: 15622 of

approved make in all colours and shades in for outdoor floors

such as footpath, court yard, multi modals location etc., laid on

128 NDSR-85 Sqm ₹

20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand)

in all shapes & patterns including grouting the joints with white

cement mixed with matching pigments etc. complete as per

direction of Engineer-in-Charge.

GMRC 2026 Page 27 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and laying broken white glazed China mosaic flooring for plain and

curved surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm

to 20mm size broken pieces of ceramic/ glazed tiles, laid over cement mortar

1: 3 bedding on plain or sloped surfaces. The Treatment includes preparation

of surface as required for water proofing of roofs, balconies, terraces etc

consisting of following operations: (a) Apply of slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with water proofing compount

confirming to IS 2645 and approved by engg. incharge over the slab including

adjoining walls upto 300mm height including the cleaning the surface before

the treatment. (b) Laying brick bats with mortar using broken bricks/ Brick

bats 25-115mm size with 50% cement mortar (1:5) admixed with water

proofing compound confirming to IS 2645 and approved by engg. incharge

over 20mm thick layer of cement mortar of Mix 1:5 admixed with water

proofing compound confirming to IS 2645 to required slope and treating

similarly the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs. (c) After 2 days of proper curing applying coat of

129 NDSR-86 cement slurry using 2.75kg/sqm of cemment admixed jointless cement mortar Sqm ₹

of mix 1:4 admixed with water proofing compound confirming to IS 2645. (d)

Providing and laying broken white glazed China mosaic flooring for plain and

curved surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm

to 20mm size broken pieces of ceramic/ glazed tiles, laid over cement mortar

1: 3 bedding on plain or sloped surfaces. The flooring shall be tamped to bring

the cement mortar cream upto the surface, including rounding of junctions

and extending them upto 30 cm along the parapet. The rate shall include

bands, if different colour is used, any pattern or design as per drawing and

direction, finishing with white cement, curing, cleaning with water and oxalic

acid, etc. complete at all levels, as directed and to satisfaction to the engineer

in charge. Rate shall include all tools, tackles, machines, necessary scaffolding,

adding of waterproofing material as recommended in the bedding mortar by

the Engineer in charge. (e) The Whole terrace so finished shall be flooded with

water for a min. period of 2 weeks for curing and for final testing as per the

direction of Engg. incharge.

GMRC 2026 Page 28 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and laying vitrified floor tiles of light and dark shades,

in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS :

15622, of approved make, in all colours and shades, laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

130 NDSR-87 including grouting the joints (paper joints) with white cement Sqm ₹

and matching pigments etc., complete. Size of Tile 600x600 mm.

Laser machines shall be used for cutting tiles for cut / corner tiles

and the cut edges shall be grounded smooth to obtain straight

and hairline joints.

GMRC 2026 Page 29 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing, laying, jointing, grouting including fixing in position to

backing, prepolished, 20 mm thick granite, in sizes not less than

600x1200x20mm and rubbed to smooth mirror finish for

Veneering/Cladding work to walls, beams, columns, pilasters,

fascia, upstands, jambs, sills, copings, soffits of openings and

beams, with grout mortar of thickness to be ascertained at site

so as to achieve true lines, levels, plumb, planes etc. subject to a

minimum thickness of 20 mm for the grout cement mortar 1:4,

and making of openings for service and other outlets etc. all to

pattern, design and details as per drawings or as directed and

including preparing the backing to receive the granite work,

white cement mortar, mixed with pigment to match colour of

1 NDSR-88 granite for bedding and jointing, including curing, rubbing, Sqm ₹

sand blasting, washing, cleaning, providing cut-out for

services, machine cutting, providing machine drilled holes,

recesses, rebates for stainless steel attachments/ fixings,

providing movement joints etc. all as per drawings, specifications

and as directed complete (stainless steel attachments/fixings

shall be paid separately). Provision to be made for "V"

groove as per drawing, design and as approved by engineer.

All shades and textures of granite available in Quarries of Nearby

states (Gujarat, Rajasthan etc.,)

GMRC 2026 Page 30 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing, laying mirror polished granite stones 20mm thick, all

to required sizes, design, details and pattern as per drawings,

including diagonal, inlays, borders, margins in one or more

types of stone over prepared base mortar with ordinary

Portland Cement, fit jointed with/ without groove, with

white cement slurry mixed with pigment to match shade of

granite including all finishing, all as required, as per

specifications and drawings and as directed complete

in floors, landings with upto 30mm thick base cement mortar 1:4

(1 cement : 4 coarse sand) using hairline finish (unless otherwise

specified) and curing, rubbing, mirror polishing / honing /

sand blasting, washing, cleaning, making cut out

for services as instructed etc.. Note: Mirror

132 NDSR-89 Sqm ₹

polished granite of all shades and textures available in Quarries

of Nearby States (Gujarat, Rajasthan etc.,), In approved

polished (mirror/honed) Base Light Coloured Granite stone slabs

in minimum size 1200 mm x 600 mm in flooring, In approved

polished (mirror/honed) Dark Coloured Type-1 Granite stone

slabs in minimum size 1200 mm x 600 mm in flooring, In

approved polished (mirror/honed) Dark Coloured Type-2 Granite

stone slabs in minimum size 1200 mm x 600 mm in flooring, In

approved sand blasted Light Coloured Granite stone slabs in

minimum size 1200 mm x 600 mm in flooring, In approved

sand blasted Dark Coloured stone slabs in minimum size

mm x 600 mm in flooring, In approved mirror polished Green

Kota stone slabs in minimum size 600 mm x 600 mm in flooring

133 NDSR-90 Dismantling of granite Sqm ₹

GMRC 2026 Page 31 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Sub-Schedule - B.8 (Repairing Work Granite/False ceiling/False

Sr No Unit Rate

Flooring/Door/Windows/Door Lock/Tiles/Door Handle)

Repairing and refixing of door/windows shutter including

removal of shutter from chaukhat cutting where necessary

134 NDSR-91 removing and refixing butt hinges on other side of frame of Each ₹

shutter wherever required. (Cost of hinges including fixing shall

be paid extra).

Repairing of existing aluminium door and windows I/c opening

135 NDSR-92 the section and refining the section as per the existing as per Each ₹

direction of E.I.C.

Repair of loose/damaged aluminium expansion joint strip with

136 NDSR-93 Sqm ₹

GP-2 or equivalent at Platform and concourse level.

Refixing of dry cladding upto 10 metre heights with 300mm thick

gang saw cut stone with (machine cut edges) of uniform colour

and size upto 1m x 1m, fixed to structural steel frame work

137 NDSR-94 and/or with the help of cramps, pins etc. and sealing the joints Sqm ₹

with approved weather sealant as per Architectural drawing and

direction of Engineer-in-charge. (The steel frame work, stainless

steel cramps and pins etc. shall be paid for seperately).

refixing of old 15-30mm thick granite stone of required size and

shape of approved shade, colour and texture in footpath,flooring

in road side plasaz ,concourse,platform and similar locations, laid

138 NDSR-95 over 20mm thick base of cement mortar 1:4 incliuding grounting Sqm ₹

the joints with white cement mixed with mathing pigment, epoxy

touch up etc. asper direction of Engineer incharge.

GMRC 2026 Page 32 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Replacing existing floor tiles/granite including cutting existing

fixed tile/granite, dismantling tile/granite, removing all debris,

cleaning and fixing new tile/granite using suitable adhesive of

139 NDSR-96 Laticrete or approved equivalent, all complete as per direction Sqm ₹

and satisfaction of Engineer-in- Charge. (This item does not

include cost of Tile/Granite which shall be paid extra)

Repairing/strengthening of existing raised false floor consisting

of pedestal and floor panels by providing extra support like the

provision of stringers made of 25mm MS square pipe etc. All

complete as per the direction of the engineer in charge. The

rates are inclusive of each individual materials, labours,

140 NDSR-97 machining/equipments all lead, lifts, transportation, painting and Sqm ₹

priming of stringers with anti corrosive/fire retardent paints etc.

complete, panels will be properly re-fixed by maintaining its

shape, size, level, alignments free from any undulation

Sr No Sub-Schedule - B.9 (Hire Machinary) Unit Rate

GMRC 2026 Page 33 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing, hiring, operating and maintaining Telescopic Manlift having

boom length of 25–30 meters on hire basis, complete in all respects

including deployment of skilled operator (driver), helper, fuel (diesel),

lubricants, insurance and all maintenance (routine, preventive and

breakdown), repairs, insurance, statutory approvals, permits and all

operational costs as directed by the Engineer-in-Charge (EIC);

The equipment shall be kept in safe, efficient and fully functional

condition at all times, and in case of breakdown the same shall be

rectified within 12 hours failing which no payment shall be made for

the entire breakdown period and penalty shall be applicable as per

SCC, and if the breakdown exceeds 12 hours, an equivalent or higher

capacity standby machine shall be deployed immediately at no extra

cost, failing which penalty shall be imposed on the contractor.

The contractor shall ensure mobilization/shifting of the Man-lift within

the contract Scope area within a maximum time limit of 2 hours per km

141 NDSR-98 or part thereof as per EIC instructions with no extra payment for Week ₹

transportation, and any delay shall attract proportionate penalty as per

SCC; the rate shall be deemed to include deployment of traffic

marshal(s) and provision of all necessary safety arrangements including

barricades, reflective jackets, baton lights, cones and warning signage

for operation near traffic areas; the contractor shall ensure availability

of the machine for all working days except one (01) weekly off, and no

payment shall be made for idle time, non-availability, breakdown or

any inefficiency; the quoted rate shall be firm, fixed and inclusive of all

taxes, duties, insurance, labour cess, statutory compliances and

incidental charges, and nothing extra shall be payable on any account

whatsoever, with payment being made only for actual working period

duly certified by the Engineer-in-Charge.

The machine deployed shall not be older than 5 years from the date of

GMRC 2026 Page 34 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and Operating Diesel Truck mounted Boom Lift of 15-20

metre reach complete in all respects including deployment of skilled

operator (driver), helper, fuel (diesel), lubricants, insurance and all

maintenance (routine, preventive and breakdown), repairs, insurance,

statutory approvals, permits and all operational costs as directed by

the Engineer-in-Charge (EIC);

The equipment shall be kept in safe, efficient and fully functional

condition at all times, and in case of breakdown the same shall be

rectified within 12 hours failing which no payment shall be made for

the entire breakdown period and penalty shall be applicable as per

SCC, and if the breakdown exceeds 12 hours, an equivalent or higher

capacity standby machine shall be deployed immediately at no extra

cost, failing which penalty shall be imposed on the contractor.

The contractor shall ensure mobilization/shifting of the Man-lift within

the contract Scope area within a maximum time limit of 2 hours per km

142 NDSR-99 or part thereof as per EIC instructions with no extra payment for Week ₹

transportation, and any delay shall attract proportionate penalty as per

SCC; the rate shall be deemed to include deployment of traffic

marshal(s) and provision of all necessary safety arrangements including

barricades, reflective jackets, baton lights, cones and warning signage

for operation near traffic areas; the contractor shall ensure availability

of the machine for all working days except one (01) weekly off, and no

payment shall be made for idle time, non-availability, breakdown or

any inefficiency; the quoted rate shall be firm, fixed and inclusive of all

taxes, duties, insurance, labour cess, statutory compliances and

incidental charges, and nothing extra shall be payable on any account

whatsoever, with payment being made only for actual working period

duly certified by the Engineer-in-Charge.

The machine deployed shall not be older than 5 years from the date of

GMRC 2026 Page 35 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing services for shifting/transportation of Man Lift

(Telescopic Sky Lift / Hydra Machine) from one work

location/section to another, including movement outside the

assigned section, as and when required, strictly as per the

instructions of the Engineer-in-Charge.The transportation shall

be carried out using suitable Truck/Trailer, including loading,

143 NDSR-99A Each ₹

unloading, securing, transit handling, fuel, tolls, driver charges,

and all other incidental expenses, complete in all respects.The

rate shall be applicable for transportation distance up to

(Seventy) kilometers (lead).The contractor shall ensure timely

mobilization and safe delivery of the equipment without any

KSB Three Phase Submersible Pump Set 9.3 kiloWatt Discharge

144 NDSR-100 Each ₹

Capacity 72000, IS:8034:2018 Compliant

Supply of 10KV generator set including the cost of diesel and

145 NDSR-101 Each Day ₹

generator including cost of operator.

Sr No Sub-Schedule - B.10 (Signage/Other Misc) Unit Rate

Reparing Signages :Repair damaged sign without replacing it

Preparing surface by removing all existing letters, symbols, base

paint, lamination if any etc. including required scaffolding etc.

146 NDSR-102 Providing and fixing digital print vinyl (3630 series of 3M or

equivalent) to existing sign board required colour with printing as

per signage schedule, laminated.

147 NDSR-102.1 300mm X 300mm Nos ₹

148 NDSR-102.2 600mm X 400mm Nos ₹

149 NDSR-102.3 1200mm X 400mm Nos ₹

GMRC 2026 Page 36 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

150 NDSR-102.3 1500mm X 400mm Nos ₹

151 NDSR-102.4 1800mm X 400mm Nos ₹

Manufacturing, supplying and fixing retro reflective signage

boards of 3mm ACP with high intensity encapsulated lens retro

152 NDSR-103 reflective vinyl Type-III, including all materials, fixing, rounding Sqm ₹

corners, complete as per specification.

Steel work in tubular sections with 50 micron pure polyester

153 NDSR-104 powder coating for signage frames, posts, suspenders; cutting, Kg ₹

hoisting, welding/bolting complete as per drawing.

Driver of 60W/100W/220W, IP65, lens option, 1W with 5-year

warranty (Osram/Vin/Samsung).

155 NDSR-106 60 watt Nos ₹

156 NDSR-107 100 watt Nos ₹

157 NDSR-108 200 watt Nos ₹

Site layout/main sign board (3mm ACP with retro reflective

vinyl), SS post 50mm dia, 1.6mm thick, height 1.6m.

159 NDSR-110 Size 1500mm X 1200mm Nos ₹

Supplying & installation of ACM material for photo-luminescent

fire exit sign.

161 NDSR-112 Size 275mm X 150mm Nos ₹

Directory board – frame of SS pipe 50mm X 50mm X 1.6mm with

163 NDSR-114 Size 1500mm X 1350mm Nos ₹

164 NDSR-115 Size 750mm X 1350mm Nos ₹

165 NDSR-116 Size 600mm X 900mm Nos ₹

Supply & installation of laminated printed vinyl sheet (3M/LG

166 NDSR-119 sqft ₹

equivalent) on glass.

167 NDSR-120 Supply & installation of flex single side print as per design. sqft ₹

GMRC 2026 Page 37 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Supply & installation of flex board single-side digital print with

168 NDSR-121 sqft ₹

aluminium stand.

Providing and pasting vinyl digital print signages at all locations

169 NDSR-122 including all T&P, labour etc for cleaning the surface, pasting

signages all complete as per direction of EIC.

170 NDSR-122.1 a) On 3mm Sunboard Base Sqm ₹

171 NDSR-122.2 b) On 3mmAcrylic Base Sqm ₹

172 NDSR-122.3 c) On 3mm ACP base Sqm ₹

Providing, supplying and fixing High Intensity Retro reflective

sheet of approved make on 3mm ACP Sheet. (Cost of ACP Sheet

173 NDSR-123 shall be paid extra) as per direction and satisfaction of Engineer- Sqm ₹

Printing Matter for Signage

Providing and fixing acrylic hanging plate with printing on both

174 NDSR-124 sides of size 1 ft x 0.5 ft all complete in all respect as per Each ₹

direction and satisfaction of Engineer-in-Charge.

Providing and fixing 6mm thick SS Plate matt finish with 4no. of

holes of dia 8mm/10mm and four edge mirror grinding and duly

175 NDSR-125 chamfered, finishing with floor, including drilling holes in floor Kg ₹

and fixing with screws, all complete as per direction and

satisfaction of Engineer-in- Charge.

GMRC 2026 Page 38 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Additional wiring for illuminated signage: Supply and wiring for

lighting/Receptacle in the existing conduit for lighting

circuits/single phase sockets from DB to the switch box with P +

N _+E copper FRLSZH 1.1 KV grade cable to connect all signage’s,

176 NDSR-126 LEDs, Lights, switches sockets etc. All wires shall be terminated

with Pin tyle lugs and provided with ferrules for identification

normally circuit mains start from DB, MCB and run up to the

switch box/MCB controlled lights up to first point.

Single circuit consisting of 3 Run 2.5 sqmm copper conductor FRL

177 NDSR-126.1 SZH 1.1 KV Grade cable RM ₹

Double circuit consisting of 6 Run 2.5 sqmm copper conductor

178 NDSR-126.2 FRLSZH 1.1 KV Grade cable RM ₹

LED Rope light for Glow type signage

179 NDSR-126.3 RM ₹

180 NDSR-126.4 Nos. ₹

Providing and fixing of Anti Birds Spikes made of high quality of

Poly Carbonate, 5 Row 304mm. Rates are inclusive of screws,

181 NDSR-127 cable ties, adhesives, fasteners up to 5 meter Height complete as Mtr ₹

per direction of Engineer-in-Charge.

GMRC 2026 Page 39 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Attending various day to day complaints consisting of repairs to

the doors, windows, tables, chairs, ventilation, leakage of pipe

lines, fixing the fittings using putty, nails, screws, minor paints in

parts not exceeding 0.50 sqm and rectifying the defects, cause of

complaints, with necessary T&P but without changing/replacing

the fittings/fixtures and its internal parts and it shall be treated

as one complaint only. This includes maintenance of all the

buildings and installations, involving repairs & maintenance &

attending the complaints/faults/breakdowns and taking

rectification action, within specified time to ensure the 24 x7

operation of Metro systems and installation/fixtures etc. [

material like screws/nails for fixing of tower bolts/door handles

etc. and washers/ thread/ sefeda etc. in bib cock pillar cocks etc.

to prevent the leakage is included in the rates.]

Note:- For one location attending one complete unit (such as one

183 NDSR-128.1 door, one window, one table, one ceiling unit of one room , one

Almirah etc. shall be treated as one complaint.)

184 NDSR-128.1 Cost for Each complaint Each ₹

Fabricating and supply & fixing of stainless steel (conforming to

185 NDSR-129 grade SS 304 stain finish) four seater bench without backrest as Each ₹

186 NDSR-130 Face (Wall mounted)

GMRC 2026 Page 40 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions. Signage depth 25mm and inner thickness

mm with profile weight of 0.492 kg per meter. Corners used to

create frame.4mm FR grade ACP AL45 used on both sides with

3M IJ 180C vinyl with 8520 over laminate/IJ480C non pvc vinyl

with 8550 non pvc over laminate/Diamond grade type-11. Retro

reflective fixed inside with the help of double sided tape. Signage

will be fixed by passing screws from star corner which will be

fixed by drilling into the wall.

188 NDSR-130.1 Non-Lit Sqm ₹

189 NDSR-130.2 Lit/Illuminated (Less than 0.5 sqm face area) Sqm ₹

190 NDSR-130.3 Lit/Illuminated (Equal to or More than 0.5 sqm face area) Sqm ₹

191 NDSR-131 Projected

GMRC 2026 Page 41 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Modular signage using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions. Signage depth 50mm. Profile outer thickness

2.5 mm and inner thickness 1.5 mm with profile weight of

kg per meter. Corners used to create frame. 4mm FR grade ACP

192 AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non pvc vinyl with 8550 non pvc over

laminate/Diamond grade type-11 Retro reflective.For a IDDS

display box of approx. size 950 x 450 mm: A MS ( mild steel) RHS

50 x 25 x 3 mm horizontal member welded on a 10 mm thick

mounting plate supported by triangular gusset plate of 8 mm

thick. This structural mounting is stable enough for IDDS. A cover

plate of full or half size covers the mounting and gusset plate.

193 NDSR-131.1 Non-Lit (Two sided) Sqm ₹

194 NDSR-132 Suspended (At Concourse Level)

GMRC 2026 Page 42 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame.

195 4mm FR grade ACP AL45 used on both sides with 3M IJ 180C

vinyl with 8520 over laminate/IJ480C non pvc vinyl with

non pvc over laminate/Diamond grade type-11. Retro reflective.

The height of the pipe can be as per different locations on site,

height can be maximum up to 1.8 meter.

At Concourse Level - with two nos. SS sections for suspension.

SS316 CHS (Circular Hollow Section) of dia 38mm/1.5" to be used

to suspend a Display box of approx. 1220 x 450 mm.

196 NDSR-132.1 Non-Lit (Two sided) Sqm ₹

197 NDSR-132.2 Lit (Two sided) Sqm ₹

198 NDSR-133 Suspended (At Platform Level)

GMRC 2026 Page 43 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

199 Corners used to create frame. 4mm FR grade ACP AL45 used on

both sides with 3M IJ 180C vinyl with 8520 over laminate/IJ480C

non pvc vinyl with 8550 non pvc over laminate/Diamond grade

type-11. Retro reflective.

The height of the pipe can be as per different locations on site,

height can be maximum upto 1.8m. At Platform Level - with MS

sections for suspension. 40x40x3mm MS Pipe box sections to be

used to suspend a Signage box of approx. 1220 x 450 mm.

200 NDSR-133.1 Non-Lit (Two sided) Sqm ₹

201 NDSR-133.2 Lit (Two sided) Sqm ₹

202 NDSR-134 Post (Non-lit)

GMRC 2026 Page 44 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

(Thickness 20-75 microns). ISO-9001-2008 product with premium

grade anodizing as per qualanod and qualicoat international

standards. With lifetime warranty under normal working

conditions. The weight per meter is 2.148 kgs and profile

thickness is 3.2mm.

I sign display frame: modular signages using aluminum extrusions

(Alloy 6060) with anodizing (thickness 20-75 micron).ISO-9001-

2008 product with premium grade anodizing as per qualanod

and qualicoat international standards. With lifetime warranty

under normal working conditions.

203 Signage depth 50mm. profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C

vinyl with 8520 over laminate/IJ480C non PVC vinyl with

non pvc over laminate/Diamond grade type-11- Retro reflective

fixed inside with the help of double sided tape.

For mounting the poles MS section fixed inside the octagonal

post, top covered with plastic caps and bottom base plate made

out of 10mm thick MS plate with round edges.

At Ground Level

For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk

204 NDSR-134.1 SHS, fixing with 16mm dia 600mm long J-bolts in Concrete Sqm ₹

GMRC 2026 Page 45 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

At Platform Level

For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk

205 NDSR-134.2 SHS, fixing with 16mm dia 250mm long Threaded Rods/bolts. Sqm ₹

Provding and fixing Modular Totems using aluminum extrusions

(Alloy 6060) with anodizing (Thickness 20-75 microns). ISO-9001-

2008 product with premium grade anodizing as per qualanod

and Qualicoat international standards. With lifetime warranty

under normal working conditions. Sections can be used to create

totems up to 6m with variable depths as per requirement. Basic

NDSR-135 profile with thickness 2mm and 1.525 kg/meter. Round cover

207 profile of thickness 2mm and Sqm ₹

1.136 kg/meter. Ease of graphic change and maintenance.

The cost shall include complete foundation works including

earthwork, excavations, centering, shuttering, steel/RCC

materials, bolts etc.

Totem size shall be 1000mm breadth x 4000mm height excluding

foundations and base.

208 NDSR-136 Channel Letters

GMRC 2026 Page 46 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Main station identity name shall be illuminated, exterior LED

channel letters, reverse letter made with 3 mm aluminum.100

mm sides of signage by bendable Aluminum alloy. Both back &

side assemble with by argon welding. Top signage sheet

fabricated of 5mm thick, Opal cast A grade PMA sheet 3/4" ring

made of 5mm plexi.IP-65 high power chips LED modules (CE

certified) 12V DC-1-1.4 watt beam angle 140/160.Input Voltage

220V AC-input frequency 47Hz Max. Output power

300/200/100W. The sign and the logo shall hallow lit effect by

210 NDSR-136.1 Lit Channel Letters 600mm height Nos ₹

211 NDSR-136.2 Lit GMRCL Logo 1000 x 1000mm Nos ₹

212 Additional Structural steel required for ceiling Suspension

All structural steel shall be of tested quality and shall conform to

one of the following standards

NDSR-137 IS:226 Structural steel (Standard Quality)

IS:2062 Structural steel (Fusion welding quality) Grade A (1992)

IS:961 High Tensile Structural Steel (Ordinary)

214 NDSR-138 Offices / Door signages

GMRC 2026 Page 47 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing plate signs made in 2mm Aluminum Brush

finish Sheet neatly trimmed and corners rounded and dressed

with holes punched/drilled as per size given in drawing. Graphics

to be Plotter cut over self-adhesive vinyl as per artwork and

complete plate covered with a protective over laminate as

specified and duly approved by Engineer-in-charge. Cost to

215 include fixing of sign at location on to plastered Sqm ₹

surface/concrete/Granite cladding etc. including all marking,

alignment, drilling, and plugs. 4nos. mirror head bolt per signage.

Mirror bolt head stainless steel screws complete as specified in

drawings and at locations approved by the Engineer-in charge.

Providing and fixing graphics printed on Opaque Vinyl directly

pasted on the glass surfaces. Printed over Opaque self-adhesive

vinyl as per artwork and completed and laminated with

protective over laminate as specified and duly approved by

Engineer-in charge. Cost to include fixing of sign at location on to

glass surface including its cleaning, marking, alignment, complete

as specified in drawings and at locations approved by the

NDSR-139 Engineer-in-charge.Signs including all operations from printing,

217 fixing graphics with protective laminate, and installation all Sqm ₹

complete as per relevant drawings and technical specifications.

Providing and fixing non-illuminated Photo-luminescent Safety

Way Guidance System (SWGS) Signages on rigid sheet with

Strong Self Adhesive and protective laminates, Life: 10 Years and

Weather Proof. The sign should be easily cleanable with a dry

cloth or with a cloth humidified with water, Self-Extinguishing,

and should not contain any radioactive substances in toxic terms.

GMRC 2026 Page 48 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Photoluminescent

(Glow) Signages

Signs including all operations from printing, fixing graphics with

protective laminate, and installation all complete as per relevant

drawings and technical specifications.Providing and fixing non-

illuminated Photo-luminescent Safety Way Guidance System

(SWGS) Signages on rigid sheet with Strong Self Adhesive and

protective laminates, Life: 10 Years and Weather Proof. The sign

should be easily cleanable with a dry cloth or with a cloth

humidified with water, Self-Extinguishing, and should not contain

NDSR-140 any radioactive substances in toxic terms.The product should be

219 safe , Non Peelable, Non Scratchable, Non Breakable, Silk Screen

Printed: high quality paint with UV resistance, As Per PSPA Class -

A / DIN 67510 Part 2 / 60 Minutes / > 700 mcdl with High photo-

luminescent luminous intensity Certified By Government Of India

Lab For A Glow Period > 24 Hrs. DRDO & ARAI Certified for All

require QC test to Confirm As per the IS 9457-2005 ,IS 12349 (To

be approved by EIC) the color Should be RED/ GREEN/ BLUE/

YELLOW with Graphics Symbol in White as approved by GMRCL/

Engineer-in-charge.

220 NDSR-140.1 Exit direction and Emergency Exit signages - 150 x 400mm Nos ₹

221 NDSR-140.2 Escape arrow Path Marking Tape sign - 80mm thk RM ₹

222 NDSR-141 Additional Conduiting for Illuminated Signages

GMRC 2026 Page 49 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing conduit embedment or surface laying on the roof slab /

wall/ structures including supply of heavy duty GI conduit pipe

with minimum 20 micron thick galvanizing along with all required

G.I conduit accessories like bends elbows, junction boxes square

boxes etc. With specification as covered under special

specifications of electrical works .The conduit shall be installed

and GI fish wire shall be provided a pulling wire. The conduit shall

be provided as pulling wire, surface laying conduit shall be used

with spacer type saddle clamps with brass

32mm Dia - GI Conduit pipe for lighting and power circuits

224 NDSR-141.1 including conduit Rm ₹

25mm Dia - GI Conduit pipe for lighting and power circuits

225 NDSR-142.2 including conduit Rm ₹

accessories and all junction as required.

226 Additional Wiring for Illuminated Signages

25mm Dia - GI Conduit pipe for lighting and power circuits

including conduit accessories and all junction as required. Supply

and wiring for lighting/receptacle in the existing conduit for

Lighting Circuits / Single phase sockets from DB to the switch

NDSR-143 control box (SB) with P+N+E-copper FRLSZH 1.1 KV grade cable to

227 connect all signages, LEDs, lights, switches, sockets etc. All wires

shall be terminated with pin type lugs and provided with ferrules

for identification normally circuit mains start from the DB, MCB

and run up to the switch box/ MCB Controlled lights up to first

GMRC 2026 Page 50 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Single circuit consisting of 3 Run 2.5 sq.mm copper conductor

228 NDSR-143.1 FRL SZH ,1.1 KV Rm ₹

Double circuit consisting of 6 Run 2.5 sq.mm copper conductor

229 NDSR-143.2 FRLSZH 1.1 KV Rm ₹

Single circuit consisting of 2 Run 4.0 sqmm and 1x2.5 sq.mm

230 NDSR-143.3 copper conductor Rm ₹

FRL SZH ,1.1KV grade cable

Double circuit consisting of 4 Run 4.0 sq.mm and 2x2.5 sq.mm

231 NDSR-143.4 copper conductor Rm ₹

FRLSZH 1.1 KV grade cable

232 Spike for birds

Providing and fixing spikes over suspended/post/projected

signage for birds made with latest technology that do not harm

bird but make signage bird proof. Spikes for birds made in 3 inch

Uv stabilized polycarbonate protecting it from the sun's rays.

That will not go brittle even in direct sunlight. It shall be also

temperature resistant tested from 20 °C to +150 °C. It shall be

NDSR-144 effective against even the heaviest pigeon infestation. Bird spike

shall be designed to protect broad and narrow ledges. Maximum

height shall be 3 Inch. Length shall be as per signage. Color shall

be transparent Cost to include fixing of spike on signage

including all marking & alignment. Locations approved by the

Engineer-in charge.

234 NDSR-145 Installation of Low Height Ticket Counter Sqm ₹

235 NDSR-146 Installation of Drop off Signage Board Sqm ₹

GMRC 2026 Page 51 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Sr No Sub-Schedule - B.11 (Borewell items) Unit Rate

Supplying and Installation as Specified the following ,as per

236 NDSR-147 direction of engineer-in -charge,including all taxes and duties

Water type check valve 100mm dia of Odco,sant,kirloskar, leader

237 NDSR-148 Each ₹

or equivalent make conforming to PN-10

Pressure gauge with isolating valve of 10mm dia confirming to IS:

238 NDSR-149 Each ₹

3624 of H-Guru, Dan-Fuss or equivalent make

Supply of submersible pump set with 4 HP, 3 phase, 440 volt,

Hz motor 10 stage pump suitable for 80 feet water level and

discharge 1800 ltr/hr model no. CORA- 12C/') make - KSB.The Each ₹

rates are inclusive of all taxes and duties complete.

Supply erection of 2.5 sqmm submersible cable make- Finolex,

240 NDSR-151 CCI, skyone.The rates are inclusive of all taxes and duties Meter ₹

Lowering of pump submwersible pump into the existing bore as

241 NDSR-152 per direction of engineer-in-charge.The rates are inclusive of all Each Job ₹

taxes and duties complete.

Lifting of pump set from the existing bore as per direction of

242 NDSR-153 engineer-in-charge.The rates are inclusive of all taxes and duties Each Job ₹

Providing and fixing ISI mark 4 x 2.5 sqmm. Copper conductor

armoured cable. All work shall be carried out as per direction

243 NDSR-154 from Engineer-in-charge.The rates are inclusive of all taxes and RM ₹

duties complete.

GMRC 2026 Page 52 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Providing and fixing ISI mark 1' PVC conduit pipe. All work shall

244 NDSR-155 be carried out as per direction from Engineer-in-charge.The rates RM ₹

are inclusive of all taxes and duties complete.

Removal of water and existing filter materials from the

structures, Development and cleaning of bore Cleaning of

245 NDSR-156 material and putting back to the system as required and per Each ₹

direction of engineer-in -charge. The rates are inclusive of all

taxes and duties, Nothing shall be paid extra.

Miscellanecous civil works like cleaning of ground rain water

drain , meshes, minor repairing of drains, meshes, manhole

246 NDSR-157 covers etc. The rates are inclusive of all taxes and duties Each ₹

Cartage of equipment required for maintenance of Borewell as

247 NDSR-158 required as per direction of engineer-in-charge. The rate are Each job ₹

inclusive of all taxes and duties complete.

Sinking bore well of 150mm dia clear, using fast rig in all strata

including I Lot overburden up to 20m, fixing of casing pipes,

collars and cap with necessary cutting and threading Including

248 NDSR-159 Lot ₹

transportation of rig and supporting vehicle, crew charges and

cost of consumables etc. complete including yield test at the final

depth with a minimum working of comeressor for one hour

249 NDSR-159.1 Up to 60 m depth @Rs. 200 perm

250 NDSR-159.2 Above 60m and up to 90m@ Rs. 220 perm

251 NDSR-159.3 Above 90m to 120m @ Rs. 250 per m

Supplying 150mm n.b MS 'C' class bore well casing pipe with

collars conforming to IS Standards

GMRC 2026 Page 53 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Supply, delivery, Installation, testing and commissioning of

vertical multistage submersible pump of Suitable Capacity (HP)

253 NDSR-160 and providing necessary piping and valves upto ground level Set ₹

One set vertical multistage suitable submersible pump of 3 Phase

415 V, 50 Hz AC, pump capable of pumping 600LPM against an

approximate total head of 110m from all causes, Including

providing 4C x 4 Sqmm 440 V flat core double sheathed water

proof submersible cable, Star Delta starter, control panel with

dry run preventer, overload protection and backup protection

and capacitor as required, installed Inside a weather proof kiosk

254 NDSR-160.1 with locking arrangement of approved design near the bore well,

including making necessary electrical connections from mains to

the starter panel and from starter panel to pump. Submersible

pumps may be of Atlanta/ KS8 / Klrloskar / Calama makes

Note: The 4C x 4 Sqmm 440 V flat core double sheathed water

proof submersible cable shall be in scope of contractor as e_er

site condition.

Providing & fixing gun metal gate valve & non return valve of

50mm nominal bore on delivel\l_ side

Supply & Fixing 50mm n.b GI Pipe conforming to IS Specifications

from bore well pump up to ground level.

lowering the pump & pipe assembly using tripod & chain pulley

block in a neat workmanship manner with all necessary

257 NDSR-160.4 accessories for supporting the pump, providing & fixing

necessary bore well clamps on the delivery pipe to securely

position & retain the pump & pipe in position etc., come_lete

GMRC 2026 Page 54 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Supply, delivery, installation, testing and commissioning of

vertical multistage submerslble pump of suitable HP or nearest

standard manufacturing size and providing necessary piping and

258 NDSR-161 valves up to ground level suitable for 601pm at 25 mtr head Set ₹

complete with 4m delivery pipe, submersible electrical cable,

DOt. starter, Level switch [Float sensor.

Providing, erecting approved make horizontal mono submersible

pump set I having flow rate of 60 LPM and 25 m head with

suitable motor working on 3 Phase, 50 Hz, 415 volt+-10% with

259 NDSR-162 dual starter, cables of required size, GI medium delivery pipes, Set ₹

specials, suction strainers etc. complete including manlfoldL

control and measuring devices.

Sr No Sub-Schedule - B.12 (Paver Block Work) Unit Rate

Providing and laying factory made chamfered edge Cement

Concrete paver blocks in footpath, parks, lawns, drive ways or

light traffic parking etc, of required strength, thickness & size/

shape, made by table vibratory method using PU mould, laid in

required colour & pattern over 50mm thick compacted bed of

sand, compacting and proper embedding/laying of inter locking

60 NDSR-163 paver blocks into the sand bedding layer through vibratory Sqm ₹

compaction by using plate vibrator, filling the joints with sand

and cutting of paver blocks as per required size and pattern,

finishing and sweeping extra sand. complete all as per direction

of Engineer-in- Charge.60mm thick cement concrete paver block

of M-35 grade with approved colour, design & pattern.

GMRC 2026 Page 55 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Taking out existing CC interlocking paver blocks from footpath/

central verge, including

removal of rubbish etc., disposal of unserviceable material to the

261 NDSR-164 dumping ground, for which Sqm ₹

payment shall be made separately and stacking of serviceable

material within 50 metre lead

as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any

design/ shape laid in required

line, level, curvature, colour and pattern over and including

mm thick compacted bed of

62 NDSR-165 coarse sand, filling the joints with fine sand etc. all complete as Sqm ₹

per the direction of Engineerin-

charge. (Old CC paver blocks shall be supplied by the department

Sr No Sub-Schedule - B.13 (Paint Work) Unit Rate

Finishing with Deluxe Multi surface paint system for interiors and

exteriors using Primer as per manufacturers specifications :

263 NDSR-166 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and Sqm ₹

including one coat of Special primer applied @ 0.75 ltr /10 sqm

Finishing walls with Acrylic Smooth exterior paint of required

264 NDSR-167 shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) Sqm ₹

on existing cement paint surface

Painting with synthetic enamel paint of approved brand and

265 NDSR-168 manufacture of required colour to give an even shade : Sqm ₹

One or more coats on old work

GMRC 2026 Page 56 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Removing white or colour wash by scrapping and sand papering

266 NDSR-169 and preparing the surface smooth including necessary repairs to Sqm ₹

scratches etc. complete

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )

267 NDSR-170 content. Sqm ₹

With water thinnable cement primer on wall surface having VOC

content less than 50 grams/litre

Total of Schedule-B

GMRC 2026 Page 57 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

Annexure – 2, DETAILS OF TAXES AND DUTIES (Tax Bifurcation) INR: Indian Rupees

GST (Goods and Services Tax)

Customs Duty Total

CGST SGST IGST Any other Tax Amount of

t on t on Amount Amount

Amou Amount on Amoun Amoun

which Rate which Rate Amount Rate on which Rate Amount on which Rate (6) = sum

nt which tax/ t t of (1) to

tax/ (%) tax/ (%) (INR) (%) tax/ duty (%) (INR) tax/ duty (%)

(INR) duty levied (INR) (INR)

duty duty levied levied (5)

al Note :1 Contractor at any point of time shall be bound to share the details pertaining to the Input Tax Credit availed or to be availed along with the supporting documents.

Note:2 In the Tax Schedule Contractor shall require to furnish component wise tax details.

Note:4 GST TDS will be deducted from the invoice considering the prevailing rates

Note 5 : It shall be sole responsibility of Contractor to pass all the accrue or to be accrued Input tax credit to GMRC as per Section 171 of CGST Act.

GMRC 2026 Page 58 of

Tender No: GMRC/CIVIL MAINTENANCE/UG/PH-1/2026 BOQ

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer C15 & C26 of ITT)

1The following are the particulars of minor deviations from the requirements of the Tender Document:

Sr. No Clause Deviations Price adjustment for each

1 The Tenderer shall indicate price adjustment against each deviation in Annexure 13A of BOQ. This price is the price

which the tenderer shall reduced from this tender price if deviation(s) is/are accepted by the Employer.

2 Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No

Deviations’.In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the

tenderer has not proposed any deviations from tender documents.

3 If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender,

other than in this Annexure, it will have no effect.

Signature of authorized signatory on behalf of tenderers

GMRC 2026 Page 59 of