E TENDER FOR RENOVATION AND ADDITION ALTERATION OF DEODAR-1 AND 2 SDN OFFICE BUILDING AT DEODAR UNDER PALANPUR CIRCLE OFFICE UGVCL

Name of Work:- Renovation & Addition-alteration OF Deodar-1 & 2 S/DN Office Building at Deodar.

Sr.No. Description Qty. Unit Rate Amount

Removing dry or oil bound distemper by a washing and scraping and sand

1 papering the wall surface smooth including necessary repairs to scratches 3100.00 SMT 11.42

Wall painting two coats with weather proof acralic emulsion APEX type

paint of approved brand & manufacture and of required shade on exterior

wall surface to give an even shade over and including a primery coat with

alkaly resistance primer of approved brand after throughly brushing surface

to remove all dirt and remains of loose powdered materials etc comp. for all

Applying two coats of Birla Or Asian acrylic lapi (putty) & two coats of primer

approved brand and manufacture on new wall surface to give an even shade

including throughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth

Wall painting (Two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

4 throughly brushing the surface free from mortar droppings and other foreign 2350.00 SMT 82.36

matter and sand papered smooth.(tractor emulsion & equivalent)

Dismentalling tiles or stone floors laid in mortar including stacking of

5 serviceable materials and disposal of unserviceable materials with all lead 35.00 SMT 48.63

Removing and scraping of old deteriorated plaster of any thickness fromm

6 wall / R.C.C member including stacking of serviceable material anddisposal of 165.00 SMT 19.69

unserviceable from site of work with all lead and lift

Demolition of brick work and stone masonry including stacking of serviceable

7 materials and disposal of unserviceable materials with all lead and lift 20.00 CMT 557.32

Dismantling barbed wire in fencing including making rolls and also including

dismantling fencing posts including all earth work concrete in base and

8 vmaking good disturbed ground stacking useful materials as directed and 280.00 RMT 67.47

disposing of the unserviceable materials with all lead and lift.

Dismentalling doors, windows, ventilators, etc. (Wood or steel shutters

including chowkhars, Architraves, Holdfasts and other attachment etc.

complete and stacking them within all lead and lift. 1. Not exceeding 3 Sq.M.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and

10 clamps including stacking the materials with all lead and lift ( for any dia, of 125.00 RMT 75.92

Scraping oil paint from steel and other metal surface and making the surface

even (with Hand Scraping.)

Painting two coats (Excluding priming coat) on previously painted wood and

12 wood based surface with enamel paint, to give an even shade including 30.00 SMT 114.58

cleaning the of all dirt, dust and other foreign matter.

Polishing with french polish on previously polished wood an wood based

13 surface to give an even surface including cleaning the surface of all dirt, dust 45.00 SMT 72.10

and sand papered smooth including a coat of wood filler.

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised

aluminium entrance door using extruded section fabricated by standard

manufactures with framing 10.15cm x4.45cm rectangular section with

minimum Thickness 1.95mm & door shutter made from 10.15 cm x 4.45cm

aluminium top / bottom section,Lock rail mimimum 15.0cmx4.45cm &

vertical section 4.70 x 4.45 cm size with minimum Thickness 1.95mm using

14 5.0mm thick "Triveni"or HB4 smoke glass with glazing deep rubber gasket 16.00 SMT 6965.00

with locking arrangement(Godrej type) with all fixtures & fastenings of

anodised section with aluminium bedding floor spring mounted door closer

with all labours & materials etc. Complete as per drawing and as directed by

E.I.C..Item also includes powder coating to alluminium sections of approved

colour / shade incl. all materials,labour,tools & tackles etc. complete.

Sr.No. Description Qty. Unit Rate Amount

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised

aluminium entrance door using extruded section fabricated by standard

manufactures with framing 10.15cm x4.45cm rectangular section with

minimum Thickness 1.95mm & door shutter made from 10.15 cm x 4.45cm

aluminium top / bottom section,Lock rail mimimum 15.0cmx4.45cm &

vertical section 4.70 x 4.45 cm size with minimum Thickness 1.95mm using

15 5.5mm thick "Triveni"or HB4 smoke glass with glazing deep rubber gasket 13.00 SMT 5790.00

with locking arrangement(Godrej type) with all fixtures & fastenings of

anodised section with aluminium bedding, hydraulic door closer with all

labours & materials etc. Complete as per drawing and as directed by

E.I.C..Item also includes powder coating to alluminium sections of approved

colour / shade incl. all materials,labour,tools & tackles etc. complete.

Providing and fixing window having extruded alluminum colour anodized

section frame main outer size 63.5 x 38.10 x 1.95mm (of Jindal Section

no4605,@ wt 1.094 Kg/Rmt), horizantal two track member size 61.85mm x

31.75 mm x 1.20mm (of Jindal section no 8687 @ wt of 0.695kg/Rmt),

vertical memberof size 61.85mm x 31.75mm x 1.30mm (of jindal section no

8758 @ wt of 0.659kg/mt) with sliding shutter of horizantal member size

16 40mm x 18mm x 1.29mm (of jindal section no 8949 @ wt of 0.456kg/Rmt), 8.00 SMT. 1696.73

vertical member of size 40mm x 18mm x 1.29mm (of jindal section of 8947 @

wt of 0.456kg/mt, section 8948 @ wt of 0.457kg/mt) with 5mm thick

transparent bronze colour tinted float glass with powder coated alluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete (For two track window).

Providing & laying coloured glazed tiles 6mm. Thick in flooring, treads of

17 steps & landing laid on a bed of 12mm. Thick cement mortar (1:3) (1 cement : 22.00 SMT 945.95

3 coarse sand finished with flush pointing in white cement.

Providing and fixing standard extruded alluminum section of size 63mm x

38.10mm x 1.2mm (of Jindal Section no. 2434,@ Wt. 0.643 Kg/Rmt) with

18 colour powder coated alluminium frame for ventilation with 5mm thick 7.00 SMT 1163.92

frosted glass as per details etc complete for louvered glass Ventilation.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress

panel shutter having extra reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with injected fire retardant

grade polyurethene foam done in situ alongwith embedded wooden pieces

19 for stiffening & also taking hinges & fintures. The whole FRP frame & shutter 3.50 SMT 2354.22

is to be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

Providing. Laying and jointing in true line & level 40 mm dia. U.P.V.C. pipe

(Sch 40) for cold water in ground OR on wall including fittings of make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by EIC. pipe

shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concelled as directed including necessary fittings etc and fixing the

same with adhesive solvent including testing of pipe & joints including cost of

all materials etc complete.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(G)110 mm.

Providing & fixing in position collapsible steel shutters with vertical channels

20 X 10 X 2 mm. braced with flat iron diagonals 20 X 5 mm. size with top &

22 bottom rails of T iron 40 X 40 X 6 mm. with 38 mm. dia. Steel pulleys 19.00 SMT 6059.34

complete with bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

Providing & laying POLISHED KOTAH STONE slab flooring over 20mm.

(average) thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M.

23 1:1.5 laid over and jointed with grey cement slurry including rubbing & 77.00 RMT 1008.79

polishing etc.. Complete. a) 25mm. Thick ( 600 X 450mm. Size )

Providing and laying Black granite for entrance steps,water counter etc.

flooring over 20 mm. (average) base of cement mortar 1:6 (1 cement :

coarse sand) or L.M. 1:1.5 and jointed with grey cement slurry including

rubbing and polishing complete.

Labour charges for making moulding edge to granite incl. all tools,tackles

25 etc. complete as directed.approved by Engineer-in-Charge. granite moulding 175.00 RMT 85.00

Sr.No. Description Qty. Unit Rate Amount

Painting Three coats (Excluding priming coat) on previously painted steel and

other metal surface with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Providing and fixing pre-cast Rubber Dye/steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

27 2006 including 35 mm Sand layer for levelling and filling the joint with sand in 675.00 SMT 694.95

proper line and level as per guidlines of IRC : SP 63-2018 etc.

Labour charge for Removing & Refixing of removed Existing paver blocks

Providing & fixing precast concrete kerb stone of grey cement based

concrete block having size 30 cm length *30 cm height *15 cm thick of M-250

29 grade concrete as per approved design & including excavation for fixing in 100.00 SMT 371.21

proper line and level, filling the joints with C.M. 1 : 3 ( 1 Cement : 3 fine sand

) etc complete as directed

Brick work using common burnt clay building bricks having crushing strength

not less than 35 Kg./ sq.cm. in super structure above plinth level (upto floor

two level) in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B)

Brick work using common burnt clay building bricks having crushing strength

31 not less than 35 Kg./ sq.cm. in foundation & plinth in cement mortar 1:6 ( 1 10.00 CMT 4172.60

cement :+6 Fine sand ) (B) Conventional

Providing & fixing submersible pump having 1.00 HP motor of ISI brand of

CRI/Lubi or equivalent with all G.I. fittings for inlet & outlet connection with

electrical pannal, require cable etc complete as directed.

Providing & fixing pillar tap capstan head, screw down high pressure with

screws, shanks and back nuts. 15MM DIA.

Providing & fixing C.P. brass waste for wash basin or sink (B) 40mm. Dia.

35 Providing & fixing brass screw down stop tap (A) 15mm. Dia. 15.00 Nos 203.79

Providing & Fixing chromium plated brass half turn flush cock of approved

36 quality including fixing in pipeline etc.. Complete……… 25MM. Dia. 6.00 Nos 261.16

Providing & Fixing & functioning of PVC ball Valve as approved make as

directed by EIC (A). 15 mm dia. Valve

Providing & Fixing & functioning of PVC ball Valve as approved make as

directed by EIC (B). 25 mm dia.valve

Providing & Fixing Screw down bib taps of following size (B) Brass chromium

plated screw down bib tap of 15MM. Dia.

Providing & Fixing 600X450mm. Bevelled edge mirror fixed to wooden plug

with C.P. Brass screws.

Providing & Fixing C.P. Brass towel rail complete with C.P. brass brackets

fixed to wooden plugs with C.P. brass screws.

Providing of hand spray /Health faucet for european w/c of approved make

42 with all necessary fastners with wall hook for holding & 1mtr long Ssbraided 7.00 Nos 1300.00

connection pipe as directed by EIC

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

44 cleaning of soakwell throuh gully emptier 1.00 JOB 7000.00

Providing & Fixing curtains for window with S.S. curtain rod and

bracket/clamp /ring with complite Accessories incl powder coating of

approved shade & make. for fixing the same in line & level incl. 15 cm.

boarder at top / bottom and belt with velcro at middle portion of curtain &

canvas patti at top of curtain incl.stiching charges for curtain and labour

45 charges for fixing brackets/clamps & Power track channel/curtain rod 90.00 SMT 544.50

etc.complete as directed by E.I.C. NOTES : (1) The basic rate of curtain

cloth considered as Rs. 90 - 00 per Rmt length & 1.20 mt. to 1.35 mt. in

width required as per width of window. The actual payment will be made

on pro-rata basis depending on cost of cloth actually selected.(2)

Measurements will be paid in sq. mt.for the area of window opening.

Sr.No. Description Qty. Unit Rate Amount

Providing unskilled labour for movment of obstracted material during

Renovation works.

Cutting out cracks of roof terrace to V- section , cleaning out, wetting

47 grouting with cement and sand slurry 1:3 (1-cement 3-sand ) (upto 10 ton) 50.00 RMT 67.81

Providing, Erecting & Fixing ready made double coated sintex P.V.C. (ISI) or

equivalent ISI water storage tank of required capacity each with cover

including providing & fixing one 20mm.dia. float valve ball‑cock , one 20mm

48 dia. G.I. Waste pipe with plug, one 25mm dia. G.I. over flow pipe of length up 2000 Liter 3.91

to 0.30mt. including making all connection for inlet/outlet supply with

necessary fittings etc. complete on terrace. (A) 1000 Liter capacity

49 Cleaning of septick tank 1.00 JOB 1500.00

50 Labour charges - Plumber (Fitter) & Mistry 20.00 Nos 766.00

Providing & Laying C.C. (1:1.5:3) / M-20 or for plain or R.C.C. work for Road

pavement, using 12mm. to 20mm. Size black trap machine crushed metal

including necessary centering for all sides as required , mixing the concrete in

mixer machine, ramming with Vibrator, including keeping the joints between

road panels & finishing the Honeycombed surface if any, immediate finishing

51 of Top layer of road with trowel & spunch to create anti skid hard surface 25 CMT 4704.56

with curing etc.. complete as per drawing & specification, & as directed by

E.I.C. with supply of cement by the contractor. including Trimix (

REINFORCEMENT IF ANY WILL BE PAID SEPERATELY.)Note: material rate diff.

added Rs. 347.36 for ordinary concrete M-150 to M-200.

Supplying & erecting approved make low noise decorative exhaust fan having

52 size 250mm with 1350 RPM with square frame ABS body with inbuilt lowers 8.00 NOS 1353.00

& square frame.Cat-II

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder

coated and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to 300 V, Power Factor

more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7,

53 Luminaire efficiency> 85 lumens/watt, LED driver efficiency > 85 % 28.00 NOS 462.00

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make

LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(D)

LED Panel Light with provision for Plane front frame with translucent cover

fixed to housing complete.IP20(iii) 12-15 watts, 6" x 6", Surge-2 KV ii) Cat-III

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

down rod (as per requirement) erected with 24/ 0.2, 3 core flexible wire with

earthing.(Make shall be approved by Engineer in charge))

55 Providing & fixing one door bell as per instruction of E.I.C. 5.00 NOS 189.00

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class

Rigid PVC pipe and accessoriesCat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

57 accessories with earth continuity of following type erected on PVC / Metallic 8.00 NOS 632.00

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe

and accessories Cat. III

Sr.No. Description Qty. Unit Rate Amount

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessoriesCat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories.[II] For 16A Plug

and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.,a) with

medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat iii)

Providing & fixing concealed wiring for WAN line (internal) with 6 CAT ISI

Computer cable with separate 1.5 mm thick 1/2" dia. PVC pipe including

60 relevent materials as per drawing & specification & direction with I/O Socket 10.00 NOS 1374.00

with box RJ-45 & labour,wire & Pipe ( Aprox length up to 10mtr) as per

instruction of E.I.C etc.

Providing & fixing concealed wiring for WAN line (internal) with 6 CAT ISI

Computer cable with separate 1.5 mm thick 1/2" dia. PVC pipe including

61 relevent materials as per drawing & specification & direction with I/O Socket 10.00 NOS 2329.00

with box RJ-45 & labour,wire & Pipe ( Aprox length up to 10mtr to 20mtr) as

per instruction of E.I.C etc.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

accessories b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

size(a) with medium class Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

64 die cast powder coated and high U.V. & corrosion resistance with diffuser 10.00 NOS 645.00

housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy>

Supplying & erecting85fan

hook box of, 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications.(a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

P/F A.C wiring with 4 sqmm wire with 2.5mm sq earth wire and electronic

starter with O/L tripping facility Length of wire up to 10mtr

P/F A.C wiring with 4 sqmm wire with 2.5mm sq earth wire and electronic

starter with O/L tripping facility Length of wire above 10mtr

Sr.No. Description Qty. Unit Rate Amount

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to 300 V,Power Factor more than

69 Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver 6.00 NOS 3312.00

efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (d) above 36 to 48 watts, CAT-III

70 Providing & Erecting 3mm thick acrylic Sheet with grooving as directed 150 sq.inch 3.00

Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint :- (A)

71 In beams and joints channels angles, tees, flats with connecting plates or 1250.00 KG. 90.18

angles cleats as in main and cross beams, hip and jack rafters, purlins

connected to common rafters and the like.

Providing and fixing in position S.S. hand rail in main stair case, landing

,balconies etc. inHorizontal 2"(50mm) dia S.S. pipe & three horizontal 3/4"(

20 mm) S.S. pipesize S.S.Resting by square bars 1.5"x1.5" of clear height

90cms placed at 3feet c/c including making necessary hold fast fixture

taircase concrete for resting the S.S 304 grade . vertical square bars with

holding etc. as per approved design and as required for the work including

bending hand rail pipe to proper shape in curves with specials etc. complete .

Railing height is 1 M.

Filling in foundation & plinth with murrum or selected soil in layers of 20cm.

73 Thickness including watering, ramming and consolidating etc. complete. 45.00 CMT 279.28

Filling available excavated earth ( excluding Rock ) in trenches, plinth, sides of

74 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 20.00 CMT. 135.56

deposited layer by ramming & watering.

Excavation for foundation upto 1.5 M. depth including sorting out and

75 stacking of useful materials & disposing of the excavated stuff upto 50M. 27.00 CMT. 155.60

Lead. - Dense OR hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

76 and stacking of useful materials and disposing off the excavated stuff upto 50 10.00 CMT 134.95

Meter lead.(A) Loose or soft soil

Filling in plinth with sand under floors including watering, ramming,

consolidating and dressing etc. complete.

Providing & laying Cement concrete 1:4:8 ( 1 cement :4Coarse sand :

78 machine crush metal black trap aggregate 40mm.nominal size ) and curing 30.00 CMT. 2745.80

complete excluding cost of form work in (A) Foundation & Plinth

Providing and laying ordinary cement concrete M-200 and curing complete

including cost of form work but excluding cost of reinforcement steel for

reinforced concrete work in : (a) Foundation footing base of columns and

Providing and laying ordinary cement concrete M-200 and finishing smooth

with during etc. complete including the cost of form work but excluding the

80 cost of reinforcement for R.C.C. work in Beam (up to floor two level) (a) For 5.00 CMT. 7936.11

RCC Beam having cross sectional area 0.08 to up to 0.12 Sq.M.

Providing and laying ordinary cement concrete M-200 and finishing smooth

with during etc. complete including the cost of form work but excluding the

81 cost of reinforcement for R.C.C. work in Beam (up to floor two level) (a) For 8.00 CMT. 6859.35

RCC Beam having cross sectional area more than 0.18 Sq.M.

Providing & laying R.C.C. Coping in ordinary cement concrete M-200 and

82 curing complete including cost of form work but excluding cost of 12.00 CMT. 4329.99

reinforcement steel etc complete (For building up to floor two level)

Brick work using common Brunt clay building bricks having crushing strength

83 not less than 35 Kg./Sqcm. In foundation and plinth in cement mortar 1:6: 275.00 CMT. 281.14

20mm. Thick sand faced cement plaster (Tipani with Gutka) on ceiling, walls

up to full height of structure above ground level consisting of 12mm.tThick

84 backing coat of C.M. 1:3 ( 1 cement : 3 sand ) and 8 mm. thick finishing coat 600.00 SMT. 317.52

of C.M. 1:1 ( 1 Cement :1 sand) etc.. Complete.(for all floors)

Sr.No. Description Qty. Unit Rate Amount

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

PROVIDING AND FIXING IN POSITION 72 +-3 SPIRAL TURNS IN EACH 9 MTR OF

RECOMMENDED STRETCHED (LAID) LENGTH & 750 MM EFFCTIVE DIA (AFTER

LAYING) HOT DEEP GALVANIZED CROSS SPIRE TYPE RAZOR TAPE CONCERTINA

COIL WIRE USING A CENTRAL CORE WIRE HIGH CARBON SPRING STEEL (HIGH

TENSILE WIRE) MADE UP OF 2.6 MM DIA AS PER IS: 4454, PART-1, GRADE-II

HAVING MINIMUM GALVANIZING OF 230 - 250 GMS PER mm2. AROUND

WHICH A TAPE OF RAZOR SHARP BARBS STRIP OF 0.5 MM THICK & 19 MM

WIDTH CONFORMING TO IS: 513 DD QUALITY HAVING MINIMUM

GALVANIZING COATING OF 12 MICRONS WITH SERIES OF BARBS PUNCHED

86 ALONG THE LENGTH AT REGULAR INTERVAL.(APPROXIMATELY 160 BARBS 130.00 Rmt 450.00

PER RUNNING METER OF CONCERTINA COIL IS MACHINE CRIMPED WITH

TO 5 NO OF CLIPS PER EACH SPIRE MADE UP OF STEEL(SS304). INCLUDING

FIXING OF CONCERTINA COIL ON 4 RUNS OF SUPPORT FIXED THROUGH OUT

THE COMPOUND WALL WITH THE HELP OF REQUIRED GI U-NAILS / SPLIT

PIN, SCAFFOLDING ETC; COMPLETED AS PER DETAILD SPECIFICATION & AS

DIRECTED BY ENGINEER IN CHARGE. 4 Nos. of runs of support of RBT will be

paid in seperate item.

PROVIDING AND FIXING IN POSITION SUPPORT OF RBT (RAZOR BARBED

TAPE) MADE OF 2.6 MM DIA AS PER IS: 4454, PART-1, GRADE-II HAVING

MINIMUM GALVANIZING OF 230-250 GMS PER SQMM. FIXED ON ANGLE

SUPPORT OF COMPOUND WALL WITH THE HELP OF GI U-NAILS / SPLIT PIN

INCLUDING SCAFFOLDING ETC; COMPLETE AS DIRECTED BY ENGINEER IN

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work

in. (I) Edges of slabs and Breaks in floors and walls, Mass concreting &

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Providing of hydralic door closer for alluminium door as & when required.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals of galvanised steel

91 barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts 150.00 RMT 388.05

with G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x

M. block in C.C1:5:10 etc complete.

Dismentalling sanitary fittings like wash basin, W.C. pan, indian and European

92 type flushing tank etc. includingstacking the materials with all lead and lift. 2.00 Nos 410.13

Providing & fixing of box rimless pattern wall mounted cantilever type

white/coloured vitreous china European water closet including flushing

cistern with C.P bolts, nuts, CI chair (painted with two coats of enamel paint

over a coat of primer) or other hanging arrangements, bakelite / poly

propylene soft closing seat cover with C.P. hinges & rubber buffers,

93 connector pipe from P/S trap to drainage pipe, brided hose pipe complete 2.00 Nos 10895.00

with all accessories. Including cutting & making good the walls & floors

wherever required. The scope include the items as per specifications and

product details as under: EWC-P:- WALL MOUNTED CERA CAT NO: S1043168

P.25 (CHANTER with slim soft close seat cover)+ Cistern Half Frame Cat No.

B1130102 (CHEVRON) P. 32 + Knob Cat No B1120105 P. 32 OR EQ

Providing & Fixing white / coloured porcelain flat back wall type URINAL PAN

of CERA make having size 350 * 340 *615 mm of approved quality & make

including waste coupling (Full Threded) bends & necessary outlet of

25mm.dia. G.I. Pipe connections including providing Bottle Tarp, brass stop

cock (pillar cock type), PVC connection,spreader & spreader pipes,brackets

etc., completed as directed by E.I.C. Cera Cat No : S4020113, (CIVIC Urinal)+

WASTE COUPLING: CERA ALD-F8050101 or EQ PAGE

Providing & fixing urinal of CERA Make approved quality incl. connection

95 trap & with integral longitudinal flush pipe. --- Squatting plate pattern white 1.00 Nos 1614.06

earthenware 550mm. X 300mm.

Sr.No. Description Qty. Unit Rate Amount

Providing & fixing wash basin of CERA make with single hole for pillar tap

with C.I. or M.S. brackets painted white including cutting holes & making

good the same but excluding fittings. Vitreous China Flat back of size 550mm.

X 400mm. In colour.

Providing & laying coloured glazed tiles of size 300 mm x 200 mm x 8 mm /

300 mm x 450 mm x 8 mm / bigger than size shown in skirting, risers of steps

& dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

98 and to be tempered to bring mortar creme out upto 40.00 SMT 771.98

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Providing. Laying and jointing in true line & level 15 mm dia. U.P.V.C. pipe

(Sch 40) for cold water in ground OR on wall including fittings of make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by EIC. pipe

shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concelled as directed including necessary fittings etc and fixing the

same with adhesive solvent including testing of pipe & joints including cost of

all materials etc complete.

Providing. Laying and jointing in true line & level 25 mm dia. U.P.V.C. pipe

(Sch 40) for cold water in ground OR on wall including fittings of make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by EIC. pipe

shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concelled as directed including necessary fittings etc and fixing the

same with adhesive solvent including testing of pipe & joints including cost of

all materials etc complete.

Providing & Laying ordinary cement concrete M-200 and finishing smooth

with curing etc. complete including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in (II) slab having more than 10cm &

up to 13cm. thickness (up to floor two level)

Half brick masonary in common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq.cm. in cement mortar 1:4 (1cement :4

coarse sand) in super structure above plinth level (up to floor two level).

With CONVENTIONAL BRICKS

Providing & Fixing PVC Gully trap with C.I. grating brick masonary chamber &

water tight C.I. cover with frame of 300mm X 300mm.size inside with

standard weight. (i) Square mouth trap (B) 160mm. X 110mm. size P or R

Constructing brick masonary chamber for underground C.I Inspection

chamber and bends with bricks having crushing stregth no less then

kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 445 mm x 610 mm

internal dimensions total weight of cover with frame to be not less than

104 kg (wt. or cover 23 kg. and wt of frame 15 kg) R.C.C.top slab with 1: 2 : 4 mix 2.00 Nos 2903.89

(1 Cement :2 coarese sand : 4 grade stone aggregate 20 mm size) foundation

concrete 1 : 5 : 10 inside plaster 15 mm thick with cement mortar 1 :

finished smooth with a floating coat of neat cement on walls and bed

concerete etc. complete.

Extra over above item for every additional depth of 0.1 mt. of part thereof

105 beyond 450 mm depth for Brick masonry chamber (i) 455 mm x 610 mm 5.00 Nos 239.99

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with

special falnge impression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(G)110 mm

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight

not less than 35Kg.

Providing and fixing C.I. Manhole cover 0.50 M. x 0.70M. size having weight

not less than 35Kg.

Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleanising design

with C.I. screw down or hinged grating including cost of cutting & making

good the walls and floor ( 100mm. Inlet and 50mm. Outlet)

Sr.No. Description Qty. Unit Rate Amount

Providing plantation & development of plants for following plants. Bottle

brush,Chandani,Miniature,CrotonTetrapetra,Dressina,Dyphan,Kordea,Musan

111 da Pink &Red, Poinsettia Fish Ball, Phycus,Sopari Palm,Silver Oke,Song of 20.00 Nos 197.36

India OR as approved by EIC.

Supply of precast C.C. pots of approx. size 15" dia.x15" ht. with making hole

of @15 to 20mm dia. Hole at bottom and painted with tera cota colour incl.

Loading/transportation/unloading stacking the same at proper location as

Painting two coats (including priming coat) on New steel and other metal

113 surface with enamel paint, brushing to give an even shade including cleaning 40.00 SMT 126.86

the surface of all dirt, dust and other foreign matter.

Providing & fixing steel cupboard shutter of 18 gauge with steel frame and

114 fixing the frame with brick masonry including locking arrangement with 3 7.00 SMT 3114.00

coats of approved oil paint etc., complete.

Providing and laying ordinary cement concrete M-200 and finishing smooth

with during etc. complete including the cost of form work but excluding the

cost of reinforcement for R.C.C.work in :(b) COLUMNS: (ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M (up to floor

Providing & Laying ordinary cement concrete M-200 for R.C.C. lintel

including finishing smooth with curing etc. complete including the cost of

form work but excluding the cost of reinforcement. (up to floor two level)

Providing & Laying ordinary cement concrete M-200 for Reinforced concrete

Chhajjas not exceeding 10cm. thickness (up to floor two level) including

117 finishing the exposed surfaces with cement mortar 1:3 ( 1 Cement : 3 fine 1.00 CMT 6808.58

sand ) to give a smooth & even surface centering and form work and curing

complete excluding the cost of reinforcement.

Providing plantation & development of plants/ trees/ flowers, ornamental

plants and garden shrubs, small trees of plants of selected & approval name

quality, size and growth in good condition. The work including cost of plants,

materials, digging pit in the soil of size 0.60 x 0.60 x 0.60 mtr. Soil for planting

trees, mixing of manure & refilling the pit with good earth, watering as and

when required. Providing pesticides / fertilizer with twelve months of

maintenance, replacement & replacing of dead plants during maintenance

cleaning, removing, labours, tools & tackles transportation, loading,

unloading etc., complete ad directed by the E.I.C.

A ESTIMATED COST - RS = ₹

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C

E Total including Welfare Cess ----- D = C + D -------------------------------

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by UGVCL on

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We

am/are willing to carry out the work at quated rate as above.

SIGNATURE OF CONTRACTOR Superintending Engineer

(With rubber stamp/seal of the company) UGVCL C.O. PALANPUR