Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹45.0 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹47.3 L+₹1.4 L (3.13%)Rejected-AOC | 2 | Rejected-AOC L2 BIDDER |
Tender Value
₹49.3 L
EMD Value
₹98,700
Closing Date
13 Apr 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHIEF GENERAL MANAGER
AMMUNITION FACTORY KHADKI, PUNE-03
Provision of RCC framed structure wall and MS tube framed main gate to bldg. no. 529 of C4 section at AFK.
2024_MIL_190493_1
GM/AFK/EO/DC/964R/2023-24
Open Tender
Civil Works
Item Rate
270 days
AMMUNITION FACTORY KHADKI
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹98,700
18 Sept 2024
9 Mar 2024
16 Apr 2024
9 Mar 2024
13 Apr 2024
9 Mar 2024
Amount
Dismantling existing asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
Dismantling structural steel work including doors, gates/ rolling shutters but excluding framed truss etc.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/ disintegrated rock
Exacation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.
Exacation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Soft/ Disintegrated rock.
Exacation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out hard rock by using pneumatic concrete breakers, chisels and wedges etc.
M&L for providing cement concrete type C2 1:3:6 mix (40mm graded aggregate) in foundations, filling and mass concrete.
M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 1:1.5:3 mix (20mm graded aggregate) in Foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete etc complete.
M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 1:1.5:3 mix (20mm graded aggregate) in Columns,Pillars,piers,posts and struts etc.
M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 1:1.5:3 mix (20mm graded aggregate) in beams,cantilevers,lintels over 1.5m span
M&L for providing formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter rough finished surface of concrete flat.
M&L for providing formwork to sides and soffits of beams, lintels, etc for rough finished surface of concrete flat.
M&L for providing formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanctions for rough finished surface of concrete flat.
M&L for deformed or twisted bars 10mm Dai and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for deformed or twisted bars 6 to 8mm Dai, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for Pre-cast cement concrete block Type C1 1:3:6 (20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete
M&L for Brickwork with subclass 'B' brick, straight or curved on plan exc 6m mean radius, old size bricks built in cement mortar 1:4
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including neeru finish to plastering as specified
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including sand faced plaster as specified
S&F powder coated (minimum 50 micron thick) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Door/ window frame shall be minimum 16 guage thick. The size of window frame will be 31mm x 92mm for three track sliding window. Complete all as specified and directed.
S&F powder coated (minimum 50 micron thick) aluminium window (01 gauged and 02 glazed shutters) of size 40mm x 18mm (16 Gauge) sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, fittings such as roller and touch lock for sliding window etc. complete all as specified and directed.
S&F powder coated (minimum 50 micron thick) aluminium window and ventilator shutter, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified and directed.
S&F Sheet glass 4.8mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F for Steel work in tubular trusses (RHS/SHS) and MS tube framed steel gate including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
S&F mild steel plates (plain or chequered) Fe 410 -W (Gde-E-250) quality-A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (for MS tube framed gate)
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make - TATA/JSW/ESSAR
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour to be used in valley gutter and roof covering having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw
S&F of steel Turbo Ventilators of fan diameter 600mm
Returning, filling in (hard/ dense soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M&L for Hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick in floors or pavings, watered and rammed to a true surface.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering.
M&L for providing cement concrete 100 mm thick type B- 1, 1:2:4 (20mm graded aggregate) in floors and pavings etc. including finishing the cement concrete surface even and smooth using extra cement.
M&L for preparing plastered or unplastered new surfaces and applying two coats of distemper oil emulsion over one coat of chalk whiting preparatory to distempering on walls
M&L for preparing plastered or unplastered old surfaces and applying two coats of distemper oil emulsion on walls
M&L for preparing plastered or unplastered new surfaces and applying two coats of cement paint on walls
M&L for preparing plastered or unplastered old surfaces and applying two coats ofcement paint on walls
M&L for preparation of old painted steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.
Removing excavated material (soils) exc. 1.50 km but n exc. 5 km and depositing where directed
Credit Item-Dismantled mild steel member, wrought iron (of any description) obtained from dismantling.
Credit Item-Old AC Sheet obtained from dismantling
GREENSTONE CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .