Selection of Agency for Development of Chepirog Hospital Garden/ Park along with the O & M for Three Years in Behrampura Ward – South Zone

BILL OF QUANTITIES (B.O.Q.)

BILL OF QUANTITIES (B.O.Q.)

Name of the work: Tender for Selection of Agency for Development of Chepirog

Hospital Garden/ Park along with the O & M for Three Years in Behrampura Ward –

Name of Contractor: _________________________.

Correspondence Address: ____________________.

Tender Amount: INR 1,26,36,192.87/- including all cost and taxes excluding GST.

Contractor’s Quoted Rate: -

Net Tender Amount: INR ___________________/- including all cost and taxes excluding

Amount In Words: (Rupees__________________________only) including all cost and

taxes excluding GST.

<The quote to be submitted online only>

Seal and Signature of the Bidder:

DYMC (Parks & Garden), Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

Recapulation Sheet

Sr. No. Description Amount

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

No. Qty Item Unit Rate Amount

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

1 20.00 of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Cu.m 544.95

Demolition including stacking of serviceable materilas and disposal of unserviceable materials

2 10.00 with all lead and lift. (i) R.C.C. work Cu.m 1047.38

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc. complete and stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

4 3500.00 and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil Cu.m 115.92

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

5 6.00 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation Cu.m 2653.67

Brick work using common burnt clay building bricks having crushing strength not less than

6 45.00 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A) Modular Cu.m 4241.70

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of

7 14.00 formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of Cu.m 3977.88

columns and Mass concrete

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of

8 12.00 formwork and reinforcement for reinforced concrete work in (C) Slabs, Cu.m 4460.36

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in

9 780.00 position complete upto floor two level kg 66.59

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick

11 320.00 walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar Sq.mt 155.61

1:4 (1-cement :4-sand)

U.G. TANK - Construction of under ground tank with 23 cm thick Masnory wall in c.m. 1:6

incl. Excavation, necessary 23 cm B.B.C.C.in 1:5:10 for foundation and providing R.C.C. 1:2:4 for top

slab ( 150 mm thick & bottom slab (120 mm. thick). Also having 75 mm. thick R.C.C.(1:2:4)

paradi on internal face of periphery walls. Rate includes all necessary formwork, T.M.T. steel

reinforcement as per given design, vibrating,curing, & mixing of approved water proofing

12 5000.00 material 1 Kg. of chemical with every 50 Kg.bag of cement ,inside plaster in C.M. 1:3 and vatta litre 25.00

in C.M.1:1 inside the tank . Rate also includes Providing and fixing white / sky blue coloured

glased tiles inside the tank on all four walls and on bottom slab.Providing and fixing F.R.C. frame &

cover of size 600 x 450 mm, F.R.P. steps etc. comp as directed. (Aprovel Rate)

Providing and applying water proofing treatments on RCC under ground water tank / over head

tank from in / outside & sides of the sunken slab /two compnent elastometric - flexible -

reinforced membrane coating incuding ceaning the surface, treating the joints, filling the cracks

with non-shrink grout including finally finished with C.M. 1:3 with adding 5% polymer etc

complete as directed for completed items of work as per specification at all levels with

years gaurantee.

Provideing and making pergola with RCC Structure M25 according to Architectural drawing (3 X

14 1.00 X 0.10 mtr) with installation and necessary transportation if needed etc comp. Make Concrete Shop Nos 14700.00

Provideing and making pergola with RCC Structure M25 according to Architectural drawing (5.30 X

15 1.00 0.15 X 0.10 mtr) with installation and necessary transportation if needed etc comp. Make Concrete Nos 9400.00

Shop or equivalent.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

No. Qty Item Unit Rate Amount

Providing Bench made of 100% waste plastic, UV resistant, Heavy and Durable, can sustain all

Providing GFRC cast glass fiber modified concrete bench of

18 6.00 48x18x18 inch and 35mm thickness. Each unit will have natural concrete shade with smooth finish. No.s 9890.00

Make Artocrete or Equivalent

19 1.00 TENSILE STRUCTURE Sq.mt 10000.00

Supply, fabrication and erection of steel structure and membrane panels with steel cables and

GI corner fittings nuts and bolts and associated accessories with membrane works. Membrane

system shall include membrane fabric, wire ropes and cables, shackles, rigging screws, clamps

and tensioning hardware. Rate should be includes of cost of cable, corner fixture/ hardwares,

ancher bolt. Entire work shall be carried out by approved vendors Sprech Tenso Structures/

Technospan Structure/Joy Architronics/ any other vendor approved by Architect . The

structural design & drawings shall be provided by the contractor including Reaction forces

drawings/details on Pronet (TechNet Easy software 10.1) and steel analysis should be done with

Easy Beam and the steel members should be optimized with DlubalRstab software version-7

or more which should be designed /certified by a qualified Archineer in Membrane Structures

from National/ International Institute. The cost includes supplying, designing, fabricating,

erecting of tubular structure including welding, scaffolding, cost of primer, polyurethane

paint application, vetting of design by third party consultant, etc complete.

Tensile Fabric: Ferrari Precontraint 1002 T2 Fluotop PVDF coated PVC / polyester Fabric. Weight

1050 gsm, Tensile Strength : 420/400 DaN/5cm, Tear resistance: 55/50 DaN. All outer fabric to be

waterproof type with 15 years warrantee. Boundary cables should be of GI as per the design

requirements. Corner fittings should be of epoxy primer coating and PU hard to coats. All nuts

should be HDG and bolts should be ( 8.8 grade BS). Fabric welding should be high frequency heat

Steel: Structure should be conforming to IS 161 Grade 310, [Tubular Structure made from

Steel hollow sections, ISI. IS 1161/4923, Grade Yst 310, thickness upto 5mm.(Steel hollow

sections confirming to IS 1161/4923 (Grade Yst 310) and Rolled section & plates. confirming

to IS 2062 (Grade Yst 250)] in the profile shaped as per drawings. with special plate connector,

pinion joints, Plates, hollow sections etc sing. SAW/MMAW/MIG welding process with special

plate connectors, pinion joints,plates, hollow sections etc. using SAW/MMAW/MIG welding

process with cleaning the surface and applying a coat of epoxy primer, and including tools

and plants and necessary scaffolding etc. required for all operations involved to make structure of

terminal building.

The tubular structure system with plate connectors, pinion joints, etc. is to be provided.The

complete structure to be painted with one coat epoxy primer (low VOC i.e less than 250 gm/ltr) and

two coats of Polyurethane paint (low VOC i.e less than 250 gm/ltr) on steel work at all

locations prepared by sand blasting and applied with airless spray in required DFT (dry film

thickness) for each coat as per manufacture's specifications and as per direction of

Engineer-in-Charge... Approved make for steel are TATA/ SAIL only plan

Main truss pipe of 168mm dia x 5mm thick.

Purlin pipe of 150mm dia x 3mm thick.

Rectangular pipe at both the corner of main truss pipe of 175mm x

Pin joint corner

Piller of 168mm dia x 5mm thick.

Baseplate 300mm x 300mm x 12mm

Foundation bolt M20x 400mm long.

Piller to piller support pipes 15mm dia x 5mm thk.

Measurement shall be taken of flat area only.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

No. Qty Item Unit Rate Amount

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm- H Kerb block for Footpath in M-20

grade using 20mm nominal size black trap aggregate of Sevaliya/Timba or equivalent quality

for pre-cast blocks, reasonably exposed finish/ formwork , mould with well equipped with

vibratory system for kerb stones of approved design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also include necessary cutting of asphalt, fixing

the Kerb stones in line and level on 5 cm thick sand bedding with necessary equipments and

20 1200.00 materials. The rate shall also include the flush pointing in CM (1:3) for all joints of the Rmt 431.96

kerbstones. Filling of zari alone the sides of the kerb stone fixed with Bituminous concrete

Bituminous concrete / C.C. mixed in proper position to flush with the road surface as

directed by Engineer in change to form a portable mixture.

21 150.00 Removal of kerb stone Rmt 300.00

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

392.00 required shape even shade after thoroughly brushing the sq.mt 113.40

surface to remove all dirt, and remains of loose powdered materials.etc complete

Precast Concrete Bollard with exposed Concrete finishes M25 grade, Dark Grey Color (Pigment -

450gm/Nos) with Silicon surface coating. Size 250 x 250 mm bottom, 125 x 125 mm top, Height

mm. Rate is inclusive of Concrete & Steel (8 mm dia, Approx 2.5 kgs)

Providing & fixing M. S. sliding gate made from 75 mm x75 mm x 3 mm M. S. square pipe as frame

and using 50 mm x 50 mm x 3 mm M. S. square pipe fixing in diagonal shape as per drawings &

24 4.00 design and doing duco spray paint to M. S. gate sections complete as per Engineer in charge. Sq.m 7971.93

Providing and installing in position manual operated turnstile gate of stainless steel etc comp.

Providing & making, Fixing Stainless steel letters 12" height with led light behind the ACP board

26 1.00 complete as per instruction of Engineer in charge. No.s 75000.00

Supply and Installation of durable dustbin with stand, Dry and wet dustbin, weather-resistant

dustbins at specified locations. The dustbins will be made of high-quality materials, ensuring

27 3.00 longevity and ease of use. Installation includes secure placement, and the dustbins will meet Nos 5000.00

environmental and safety standards

Providing and laying Cobble Stone (100 X 100) mm thick base of cement mortar 1:6 (1 Cement :

28 90.00 coarse sand) or lime mortar 1:1:5 laid over and joined with grey cement slurry 60 mm thick. Sq.m 1500.00

PCC - Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation

Providing in line level plumb, fabricating and fixing chainlink jali having 35x35x5 mm M.S.

Angle for frame size 8 ft x 4 ft with 65x65x2.5mm thickness GI chainlink jali and 25 x 3 mm MS flat

for support of jali with 72x 72 x 3.2 mm thickness MS square pipe at 2.70 mtr c/c fixed in

cement concrete 1:2:4 with anchore fasterner/welding etc. on parapet of canal works

30 150.00 include necessary breaker machine and d.g set for fixing on site for welding,cutting and joint etc R.mt 1900.00

painted with one coats of red oxide and two coats of enamel paint of approved quality and as per

instructed by engineer in charge.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

31 150.00 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing Sq.mt 982.83

and polishing etc. complete. (A) 25mm thick

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

No. Qty Item Unit Rate Amount

Supplying, labour for excavation of all types of soil at any depth including excavation of

asphalt pavement of any thickness, demolition of brick work in CM of any proportion including

stacking of serviceable materials and disposal of unserviceable material etc. comp. as directed.

33 3.00 Mazdoor Each 493.00

34 3.00 Providing & Supplying Hydraulic Excavator 1 cum bucket capacity @ 60 cum per hour Hour 711.86

35 1.00 Tractor Trolley (Considering 1 Tractor Trolley for 20 Days (8 Hours per Day Rs.245 per Hour) Day 1661.02

Dismantling of any type of tiles/flooring work including striking of serviceable material and

is of unserviceable materials with all leads and lift.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

37 150.00 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. Cu.m 129.10

Constructing Bombay Pattern Type Catch Pit of size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in the prop. of CM (1:6) with 40 mm thick

IPS flooring in the prop M15 at bottom and 15 mm thick cement plaster inside the catch pit in the

proportion of CM (1:3) with out jali etc. comp. as directed.

CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear opening etc. comp.. As

39 25.00 directed by Nos. 1500.00

engineer in charge.

Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of

41 300.00 approved steel primer all complete as per the structural designs and directions of Engineer in Kg 126.68

Pre cast concrete kerb Providing and fixing 2.5Mpa Grade of concrete precast exposed pimple

texture finish kerb stones of steel mould Vaccum wet pressed machine approved make as per

approved sample of any size and any type. Kerbs shall be fixed on the foundation prepared as per

approved design. The rate shall also include for erecting and fixing the pieces in position for

complete kerb system with Half Batter Profile type of kerbs including necessary accessories of kerb

like radius kerb, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. Kerb shall

42 350.00 be fixed as paper joint without any jointing material. However cement mortar shall be provided at Rmt. 1350.00

the backside of kerb stone joint. (Sample must be approved) Cost of excavation, cutting , base , side

filling shall includes as directed engineer - incharge. (b) HB 600x450x150mm. Make VYARA or

Labour work of fixing Kurb any design of central verge, (both side) footpath kurb, items includes

necessary excavation, asphalt cutting of any thickness, erecting in line and position and pointing

with cement mortar (1:3), watering, etc complete, filling with zari along the side of the kurb, the

43 400.00 kurb stone fix prepared with bitumnious top surface, as directed by engineer in charge. Rmt. 136.40

Providing and Laying of ECOLOGICAL Paver Block Grey 75 mm thick, M-20 Grade of any size ; shape

Grid paver(600*400*75mm) Design using black trap good quality aggragate of 20 mm nominal size

for footpath, , service lanes and other areas as mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using, Rate providing and laying paver blocks as per required

grading and specification. The paver block shall be mechanically compacted. The work of paving

blocks shall be executed in line and level by skill mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block to be necessary. if cutting of paver block necessary

44 180.00 then it should be cut by machine only and carting. The finished surface of the paver block shall have Sq.mt 1421.00

resonably good, plain finished. Paver blocks shall be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be allowed for production. Laying on 50mm thick sand

beddding. Make VYARA or Equivalent

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

No. Qty Item Unit Rate Amount

Providing & appliying on granules finish of Bakelite Hvlam Limited (No.21-3005, 3006, 3007,

3013, 3014, 3015 and 3016) trowelled over 20mm thick Mala finished / sand faced cement plastered

(Two coat of 12mm in CM 1:3 & 8mm coat in CM:1:1) sub strata to get an average finish coat

thickness of 0.08 to 1.2mm comprasing of three componets viz Dry granules, Granules bonding

agents and top coat of glossy finish ( Dry granules shell be made form silica sand pigments, chiefly

45 30.00 inorganic) homopolymer emulsion mix etc. of bakelite hylam product etc. and top coat made from Sq.mt 565.00

solvent based acrylic polymer of bakelite hylam product including scaffolding. Including providing

necessary grooves in surface as per instruction in charge.Upto 10m Heigh

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

Qut. Item Discripation Rate Unit Amount

46 3000.00 Supplying and spreading of good earth like firtile soil as directed etc compt. 575.00 Cmt.

Supplying and spreading of good quality river Kaamp Filling 100 mm as directed etc comp.

Supply and Planting of best quality saplings of (Jasud, Ixora, Ticoma Gaudi-chaudi, Gultora,

Jetropha, Haemeliya, Chandani, Mogaro, Galfemia, , Allamenda, Desi Gulab, Euphorbia mili,

Jasud Hybrid, Chandani double, Madhukamini, Madhumalti, Ticoma Capensis, Ixora draft,

48 750.00 Nikadevia, English Karen, Bougain villea etc.) having height of minimum 2.00 to 2.5 ft. and 50.00 Nos.

bag size is 8 inch x 10 inch, well branched, well established & free from disease at site as per

the instructions.

Supply and Planting of best quality saplings of (Jasud, Ixora, Ticoma Gaudi-chaudi, Gultora,

Jetropha, Haemeliya, Chandani, Mogaro, Galfemia, , Allamenda, Desi Gulab, Euphorbia mili,

Jasud Hybrid, Chandani double, Madhukamini, Madhumalti, Ticoma Capensis, Ixora draft,

49 300.00 Nikadevia, English Karen,Bougain villea etc.) having height of minimum 3.00 to 4ft. and bag 80.00 Nos.

size is 10 inch x 12 inch, well branched, well established & free from disease at site as per the

instructions. Location and placement of given plant to be deciced by person incharge.

Supply and Planting of best quality saplings of Palm(Botal Brush palm,foxtel etc. ) having height of

minimum 10.00 to 12.00 ft. and bag size is 21 inch x 21 inch, well branched, well established & free

from disease at site as per the instructions Location and placement of given plant to be deciced by

person incharge.

Supply and Planting of best quality saplings of champa (deshi) having height of minimum 10 to

ft. and bag size is 21 inch x 21 inch, well branched, well established & free from disease at site as per

the instructions. Location and placement of given plant to be deciced by person incharge.

Supply and planting of best quality saplings of champa (Red) having height of minimum 08 to

ft. and bag size is 15 inch x 16 inch, well branched, well established & free from disease at site

as per the instructions. Location and placement of given plant to be deciced by person incharge.

Supply and planting of best quality saplings of Tarminaliya(Mentalii) having height of minimum

10 to 12 ft. and bag size is 21 inch x 21 inch, well branched, well established & free from

disease at site as per the instructions. Location and placement of given plant to be deciced by person

Supply and Planting of best quality of Golden Bamboo having height of minimum

54 60.00 5 to 6 ft. and bag size is 8 inch x 10 inch, well branched, well established & free from disease at site as 75.00 Nos.

per the instructions

Supply and Planting of best quality of Ficus panda,Ficus benamina,Ficusbenjamina varigated,Ficus

55 30.00 longisland bag size is 13 inch x 13 inch, well branched, well established & free from disease at site as 175.00 Nos.

per the instructions

Supply and Planting of best quality saplings of Indoor Plants (Croton,Draceana, Difen,song of Indiya

etc.) having height of minimum

2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched, well established & free from disease at

site as per the instructions

Supply and Planting of best quality saplings of ground cover of species specifies (Alternathera

Green,Alternathera Red, Asparagus springerii, Wedelia trilobata, Stenotaphrum - ( Ghoda grass),

Porchuleca, kadak bijli,etc.) bag size is 6 inch x 8 inch in earthen pots well branched, well

established & free from disease at site as per the instructions

Supply and Planting of best quality healthy Creepers species (allamanda , paras,madhu malti,

58 1250.00 Railway Creepers,Jai, etc.) bag size is 6 inch x 8 inch, as per the instructions Location and placement 30.00 Nos.

of given plant to be deciced by person incharge.

Supply and Planting of best quality saplings of Hedge plants like kadvi mahendi,dyuranta, nikodeviya

etc specifies bag size is 6 inch x 8 inch, well branched, well established & free from disease at site as

59 4500.00 per the instructions Location and placement of given plant to be deciced by person incharge. 20.00 Nos.

Supply and Planting of best quality saplings of trees species as specified ( Alstonea scholaris,

Erythna indica, Jacaranda mimosifolia,Delonix regia , Anthocephalus cadamba, Spathodea

companulata,Neem (Azadirachta indica), Lagerstromia speciosa , Tabebuia argenta, Cordia

sebastena, Mimusops elegi, Bauhinia blakeana, Kigellia pinata, Cassia fistula, Banyan, Ficus religiosa,

60 12.00 Bottle brush, Silver Oak, Billi, Mahagony, Pendula, Desi Asopalav,Sevan, Badam, Ficus infectoria, 75.00 Nos.

Pinkesiya, Millingtonia hotensis, Rain Tree, Bakm limdi, kasid, Ashok tree, parkiya, Tabebuia Roseya,

miletiya etc.) having height of minimum 3.00 to 5.0 ft. and bag size is 8 inch x 10 inch, well branched,

well established & free from disease at site as per the instructions. Location and placement of given

plant to be deciced by person incharge.

Supply and Planting saplings of trees species as specified ( Alstonea scholaris, Erythna indica,

Jacaranda mimosifolia,Delonix regia , Anthocephalus cadamba, Spathodea companulata,Neem

(Azadirachta indica), Lagerstromia speciosa , Tabebuia argenta, Cordia sebastena, Mimusops elegi,

Bauhinia blakeana, Kigellia pinata, Cassia fistula, Banyan, Ficus religiosa, of Bottle brush, Silver Oak,

Billi, Mahagony, Pendula, Desi Asopalav,Sevan, Badam, Ficus infectoria, Pinkesiya, Millingtonia

hotensis, Rain Tree, Bakm limdi, kasid, Ashok tree, parkiya, Tabebuia Roseya, miletiya etc.) having

height of minimum 10 ft. to 12 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

Supply and Planting best quality saplings of trees species as specified ( Alstonea scholaris, Erythna

indica, Jacaranda mimosifolia,Delonix regia , Anthocephalus cadamba, Spathodea companulata,Neem

(Azadirachta indica), Lagerstromia speciosa , Tabebuia argenta, Cordia sebastena, Mimusops elegi,

Bauhinia blakeana, Kigellia pinata, Cassia fistula, Banyan, Ficus religiosa, Peltophoroum, Bottle brush,

62 10.00 Silver Oak, Billi, Mahagony, Pendula, Desi Asopalav,Sevan, Badam, Ficus infectoria, Pinkesiya, 2900.00 Nos.

Millingtonia hotensis, Rain Tree, Bakm limdi, kasid, Ashok tree, parkiya, Tabebuia Roseya, miletiya

etc.) having height of minimum 12 ft. to 14 ft. and bag size is 25 inch x 25 inch, well branched, well

established & free from disease at site as per the instructions. Location and placement of given plant

to be deciced by person incharge

Supply and planting best quality Medicinal plant species

63 90.00 (Damro,Parnakuti,Ardusi,Ajmo,kuvarpathu etc.) bag size is 6 inch x 8 inch, as per the instructions 50.00 Nos.

Location and placement of given plant to be deciced by person incharge.

LAYING OUT LAWN - After excavating soil upto 30 cm. depth & removing unwanted stuff, stones

etc. Preparing soil for planting by supplying, mixing and 0.5 cmt FYM maximum 100 sqmt of lawn

area and doing termicide @ 1 lit / 100 sqmt area and planting selection 1 type / English lawn /

approved lawn grass at maximum 6 cm x 6 cm distance and maintain it upto 120 days. Maintainance

include all operations i.e. watering,grass cutting, gap filling, applying of fertizer if require etc.

65 80.00 Supplying and spreading good beach sand/River sand for GYM and children play area 575.00 Cmt.

Supplying and spreading good Saaru dust on site rate including levelling and compection as per inst.

given by site incharge.

Supplying and spreading good lime dust on site rate including levelling and compection as per inst.

given by site incharge.

CHEST PRESS CUM SEATED PULLER : Length:- 1550mm, Width:- 710mm, Height:- 2150mm, Safe

Area:- 3.0 Mtr X 1.7 Mtr, Chest cum seated puller equipment made up of “B” class GI pipe of different

NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters, 100mm NB:- Centre

pipe. 80mm NB:- Foundation main pipe, 32mm NB:- Handle frame duly bend, Seat frame, support.

25mm NB:- Connecting links, handle. MS Angle 23 x 23 x 1.8mm:- Foundation support frame, MS pipe

19 x 38 x 1.8mm:- Foundation support frame, MS plate of 8mm:- Chest press profile, Seated Puller

Handle profile, Φ50mm seamless pipe:- Bushes, Φ60mm seamless pipe:- Bushes, MS sheet of size

330 x 300 x 1.8mm:- Seat and Backrest, HDPE / PPCP Plastic:- Closing caps, Base Cover, MS bright

material:- Pins made of Dia.25mm & Dia.17mm, Bearings:- Permanent lubricated bearings “6205” &

“6203” of reputed brand are used, Nut & Bolts:- High tensile steel with galvanized nut & bolts are

used, Circlips:- The circlips are used for locking is made up of A24 & A16, Handle grips:- Handle grips

are of high quality rubber material, Powder coating:- The powder coating done with Pure polyster

powder of Ackzonoble or Berger with 60 to 70 micron thickness.

Rower : Providing and fixing Rower made from "B" class G.I. Pipe. The center pipe is of 80 mm NB

made from "C" Class G.I. pipe, and the bottom support of M.S. round Plate of 250 mm dia And

mm thikness is welded at bottom. The leg movement frame is of 40 mm NB made from "C" class G.I.

pipe . The foundtion used for fixing is is consists of three equal items I.e. 80 mm NB made from "C"

class G.I. pipe, M.S. Round Plate of 250 mm dia & 10 mm thickness and 25mmX25mm M.S. angle of

mm thickness. to joint the center pipe and leg movement frame seamless pipe of 60 mm dia and

mm thickness and 60 mm solid bar is used. the bending M.S. plate is used to joint the center pipe and

leg moent frame is of 6mm thick. The foot rest is made from FRP/C.I./Alluminium casting material, its

size are 130mmX300mmX5mm. For the support 50mmX50mmX2mm CRC square pipe is used. closing

caps are made from top quality FRP material with 2 mm thickness. the pins are made up of 25 mm

diameter bright bar. The bearings used are "6205" permanent lubricated sealed. bearing of reputed

make. Use the nut bolts for assembly are made from S.S. material. The sirclips for assembly of

mm diameter. Pipes painting by attractive color sprying after proper surface treatment, shot blasting

and initial coat of yellow primer surface is applied before top coat. The top coat Must done by using

top quality brand paint or duly powder coated.

Shoulder Builder : Length:- 850mm, Width:- 600mm, Height:- 1800mm, Safe Area:- 1.9 Mtr X 1.9 Mtr,

Shoulder Builder equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore

size i.e. Internal Diameter of pipe in millimeters, 100mm NB:- Centre pipe, 80mm NB:- Foundation

main pipe, 50mm NB:- For Support, 25mm NB:- Shoulder Builder ring, MS Angle 23 x 23 x 1.8mm:-

Foundation support frame, MS pipe 19 x 38 x 1.8mm:- Foundation support frame, Φ60mm seamless

70 1.00 pipe:- Bushes, HDPE / LLDPE Plastic:- Closing caps, Base Cover, MS bright material:- Pins made of No.s 61000.00

Dia.25mm, Bearings:- Permanent lubricated bearings “6205” & “6001” of reputed brand are used,

Handle Knob:- Handle knob made from high quality nylon material, Nut & Bolts:- High tensile steel

with galvanised nut & bolts are used, Circlips:- The circlips are used for locking is made up of A24 &

A10, Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger

with 60 to 70 micron thickness

Leg Press : Length:- 1700mm, Width:- 380mm, Height:- 1550mm

Safe Area:- 2.8 Mtr X 1.4 Mtr, Leg Press made up of “B” class GI pipe of different NB. NB stands for

Nominal Bore size i.e. Internal Diameter of pipe in millimeters., 100mm NB:- Main frame, 80mm NB:-

Foundation main pipe, 32mm NB:- Seat frame duly bend, 25mm NB:- Footrest support frame, MS

Angle 23 x 23 x 1.8mm:- Foundation support frame, MS pipe 19 x 38 x 1.8mm:- Foundation support

frame, Φ60mm seamless pipe:- Bushes, MS sheet of size 330 x 300 x 1.8mm:- Seat and Backrest, MS

71 1.00 sheet of size 245 x 113 x 2.8mm:- Footrest support, HDPE / PPCP Plastic:- Closing caps, Leg press No.s 62500.00

footrest, Base Cover, MS bright material:- Pins made of Dia.25mm, Bearings:- Permanent lubricated

bearings “6205” of reputed brand are used, Bearings End cap:- Made up from Nylon material, Nut

&amp; Bolts:- High tensile steel with galvanized nut &amp; bolts are used, Circlips:- The circlips are

used for locking is made up of A24, Φ50mm PU Bush:- Stopper made up from Φ50mm PU Bush,

Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with

60 to 70 micron thickness.

Arm and Peddal Bike : Providing and fixing Arm and Peddal Bike made from "B" class G.I. Pipe. The

center pipe is of 80 mm NB made from "C" Class G.I. pipe, and the bottom support of M.S. round

Plate of 250 mm dia And 10 mm thikness is welded at bottom. The leg moment frame is of 40 mm NB

made from "C" class G.I. pipe . The foundtion used for fixing is is consists of three equal items I.e.

mm NB made from "C" class G.I. pipe, M.S. Round Plate of 250 mm dia & 10 mm thickness and

25mmX25mm M.S. angle of 3 mm thickness. to joint the center pipe and leg movement frame

seamless pipe of 60 mm dia and 3 mm thickness and 60 mm solid bar is used. the bending M.S. plate

is used to joint the center pipe and leg moent frame is of 6mm thick. The foot rest is made from

FRP/C.I./Alluminium casting material, its size are 130mmX300mmX5mm. For the support

50mmX50mmX2mm CRC square pipe is used. closing caps are made from top quality FRP material

with 2 mm thickness. the pins are made up of 25 mm diameter bright bar. The bearings used are

"6205" permanent lubricated sealed. bearing of reputed make. Use the nut bolts for assembly are

made from S.S. material. The sirclips for assembly of 25 mm diameter. Pipes painting by attractive

color sprying after proper surface treatment, shot blasting and initial coat of yellow primer surface is

applied before top coat. The top coat Must done by using top quality brand paint or duly powder

Standing Sitting Twister : Providing and fixing Double twister made from “B” Class G.I. pipe. The

center pipe is of 100 mm NB made from “C” Class G.I. pipe, and the bottom support of M.S.round

plate of 250 mm dia& 10 mm thickness is welded at bottom. The remaining frame is made up of

mm NB “C” Class G.I. pipe, for the assembly different bushes are used 3mm thickness and 50 mm

solid bar is used. The foundation support made up of three equal items i.e. 100 NB made from “C”

Class G.I. pipe,M.S. round plate of 250 mm dia& 10 mm thickness & 25 mm x 25 mm x 3mm M.S.

angle. The seats are made up of high quality FRP material of size 330 mm x 330 mm of thickness

73 1.00 mm & M.S. plate of size 250 mm x 200 mm x 5 mm is used to support it .Closing Caps are made up of No.s 82000.00

high quality FRP material which is of 2 mm thickness. The pins used are made up of 17 mm diameter

solid bar. The bearings used are of “6203” permanent lubricated sealed bearing of reputed make. The

nut bolts used for assembly are made from S.S. material. The Surclips used for assembly are of

mm diameter. The Foundation pipes are embedded in C.C. stock and painting is done by attractive

color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface

is applied before top coat. The top coat is done using the best quality brand paint or duly powder

coated with UV resistant powder(As per Market Rate)

Air Walker : Providing and fixing Air Walker made from "B" class G.I. Pipe. The center pipe is of

mm NB made from "C" Class G.I. pipe, and the bottom support of M.S. round Plate of 250 mm dia

And 10 mm thikness is welded at bottom. The leg moment frame is of 40 mm NB made from "C" class

G.I. pipe . The foundtion used for fixing is is consists of three equal items I.e. 80 mm NB made from

"C" class G.I. pipe, M.S. Round Plate of 250 mm dia & 10 mm thickness and 25mmX25mm M.S. angle

of 3 mm thickness. to joint the center pipe and leg movement frame seamless pipe of 60 mm dia and

3 mm thickness and 60 mm solid bar is used. the bending M.S. plate is used to joint the center pipe

and leg moent frame is of 6mm thick. The foot rest is made from FRP/C.I./Alluminium casting

material, its size are 130mmX300mmX5mm. For the support 50mmX50mmX2mm CRC square pipe is

used. closing caps are made from top quality FRP material with 2 mm thickness. the pins are made up

of 25 mm diameter bright bar. The bearings used are "6205" permanent lubricated sealed. bearing of

reputed make. Use the nut bolts for assembly are made from S.S. material. The sirclips for assembly

of 25 mm diameter. Pipes painting by attractive color sprying after proper surface treatment, shot

blasting and initial coat of yellow primer surface is applied before top coat. The top coat Must done

by using top quality brand paint or duly powder coated.

COUNCILOR NAME PLATE : Material of Construction : SS302 Sheet 20 Gauge Thick and MS Frame,

75 1.00 Type of Work : Engraving the contents over SS Sheet and fitting the same on MS Pipe of 1x1 suare, No.s 2800.00

Size : 2 ft x 1 Ft, MS Pillars of 4.5 Ft height to be grouted and fitted on site.

"HOW TO USE ?" INFORMATION BOARD : Material of Construction : MS Sheet 16 Gauge Thick and

MS Frame, Type of Work : Flex Printing / Paitning the contents over MS Sheet and fitting the same on

76 1.00 MS Pipe of 1x1 suare, Size : 4 ft x 3 Ft, 2 Nos. MS Pillars of 6 Ft height to be grouted and fitted on site. No.s 5000.00

Dismentalling and Refixing the children play equipment or gym equipment as per arch drawing and

engineer in charge

Overall Maintenance of garden including replacement of plants, watering, cleaning, Gardening etc.

complete for entire premises for one year (The time shall be start after official handling over of the

garden)Maintenance of Green Area Complete maintenance of green area including plants with water

for 36 months including weeding, hoeing, watering, pruning application of good earth, manure,

insecticides, fungicides & fertilizers, security of plants disposal of garden rubbish from the premises

to be approved municipal dumping ground replacing casualty of plants(occurred due to any reason)

79 4900.00 by healthy plants. All the material, manpower and equipments required for maintenance shall be 675.00 Year

arranged by the contractor and water shall be provided by the department (cost of material including

in the item) and water shall be provided by the department. The maintenance period will start after

45 days from the 100% work completion including necessary civil, plumbing, irrigation and electrical

work. Minimum One person required at every 1500 sqmt.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

South Zone, Ward - Behrampura, Chepirog Hospital , Ahmedabad

Sr. Total Item Description Final Rate 1% Labour Rate Unit Amount

No. Qty. cess include

ELW 01.00 Panel Power

80 1.00 Supply, Installation, assembling, connection, testing and commissioning of External Lighting Panel. 65,000.00 650.00 65,650.00 Nos.

ELW 02.00 Distribution Board

Distribution Board

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

81 1.00 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to 3,379.00 33.79 3,412.79 Nos.

be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door

SPN Distribution Board :

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

82 1.00 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to 1,478.00 14.78 1,492.78 Nos.

be used) suitable for (A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43)

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company

fabricated powder coated sheet steel enclosure erected as directed with connection.

[A] Metal Clad Socket with metal clad top

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company

fabricated powder coated sheet steel enclosure erected as directed with connection.

[B] 15 Amp. / 5 Amp. Five pin Universal Socket

MCB 's and its Accessories

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual

current device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec.

tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage

86 1.00 at nominal ten volt, complete erected including all materials lugs screws etc. completed. 1,925.00 19.25 1,944.25 Nos.

[b] 32A / 40A, 2 pole Single Phase

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

87 6.00 capacity & confirms to IS :8828 in existing box having following capacity 730.00 7.30 737.30 Nos.

88 2.00 Half / One Module Blanking Plate of Standard Size. 9.00 0.09 9.09 Nos.

Caution Board :

89 2.00 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer 69.00 0.69 69.69 Nos.

incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

ELW 03.00 MV Cabling

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 215.00 2.15 217.15 Meter

KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor

91 200.00 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of 123.00 1.23 124.23 Meter

cables (B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor

92 600.00 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of 114.00 1.14 115.14 Meter

cables (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.

(C) 3 core 6 Sq. mm

ELW 04.00 Cable Termination

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

94 3.00 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut 20.00 0.20 20.20 Nos.

bolts in an approved manner.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber

95 1.00 ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following 75.00 0.75 75.75 Nos.

size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Sr. Total Item Description Final Rate 1% Labour Rate Unit Amount

No. Qty. cess include

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

ELW 5.00 Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

98 10.00 following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with 445.00 4.45 449.45 Nos.

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 78.00 0.78 78.78

(A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

101 10.00 appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of 469.00 4.69 473.69 Nos.

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

102 1.00 appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of 691.00 6.91 697.91 Nos.

accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories for Exhaust.

ELW 6.00 Light Fixtures and Fans

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more

than 0.95, THD < 15 %,CCT 3000 K to 6500K,Luminaire efficacy>85 lumens/watt ,LED driver efficiency >

104 5.00 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of 584.00 5.84 589.84 Nos.

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more

than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

105 2.00 LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description 423.00 4.23 427.23 Nos.

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more

106 2.00 than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver 568.00 5.68 573.68 Nos.

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(G) Step Light having Aluminium die cast and ABS Plastic material.

(i) 5 watts, Direct/Indirect luminaire

Sr. Total Item Description Final Rate 1% Labour Rate Unit Amount

No. Qty. cess include

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

107 5.00 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 370.00 3.70 373.70 Nos.

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

ELW 7.00 Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to

108 15.00 ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of 8,551.00 85.51 8,636.51 Nos.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be submitted

by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal

soil.Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

a) For Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr

8.00 Back filling compound - 1 Nos Bag of 15 Kg. 4,546.00 45.46 4,591.46 Kg

c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs 8,551.00 85.51 8,636.51 Kg

Back filling Compound :2 nos Bags of 25 Kg.

Earth wire/strips :

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel

109 4.00 board, Motors etc. using copper clamp. 787.00 7.87 794.87 Kg

25 x 3 mm/ 32X6mm / 50x6mm CU. strip/ 38x6 Cu earth link

110 5.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787.00 7.87 794.87 Kg

ELW 8.00 Miscellaneous

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories of same material at required depth in existing 136.00 1.36 137.36

trench for laying of cable. below ground / road surface for enclosing cable

(D)120 mm outer dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories of same material at required depth in existing

112 350.00 trench for laying of cable. below ground / road surface for enclosing cable 62.00 0.62 62.62 Rmt

(A)50 mm outer dia

ELW 9.00 External Lighiting

Supply of approved make GRP Pole having following specifications:GRP Light Pole made by CNC

filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof Pole should be provided

with GRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.Pole

113 50.00 should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly 3,194.00 31.94 3,225.94 NOS.

weather resistant polyurethane coating shall be applied to the pole after applying suitable primer

system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to

micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“

Pole should be generally made as per the dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01

including cable termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as Below .

SITC of 4.0 mtr height GRP pole of Average Thickness: 7mm.Top/ Bottom OD Dia A/F 89/145 mm ±

114 40.00 2mm approx.with PU Paint Approx. Weight of Pole 19 kg approx. (Without Base)Anchor Base (Size 9,696.00 96.96 9,792.96 nos.

250X250 & 12mm Thickness).

SITC of 7.0 mtr height GRP pole Average Thickness: 7.5mm. Top/ Bottom OD Dia A/F89/183 mm ± 2mm

approx. approx.with PU Paint Weight of Pole 40 kg approx. (Without Base) Anchor Base (Size 300X300

& 18mm Thickness)

Providing GRP arm bracket of having 15˚ arm with suitable size of pole OD pipe *5 mm thk,1000mm

long from pole centre

b 6.00 (A) Single arm bracket 1,882.00 18.82 1,900.82 nos.

c 4.00 (B) Double arm bracket 2,390.00 23.90 2,413.90 nos.

Sr. Total Item Description Final Rate 1% Labour Rate Unit Amount

No. Qty. cess include

SITC of new LED light fixtures having Luminaire Efficacy≥130 Lumens per watt with maximum 60w as

per Tender terms Conditions, Specifications and Following items. (With CCT 3000 / 4000K ± 10 %)

Supply, Installation, Testing & Commissioning of New LED Light fixtures with maximum 60w LED Fitting

with 3 core x 1.0 Sq. mm Copper flexible Cable of required length from Junction Box to fixtures, & with

116 needed all electrical mechanical accessories to Commission the Streetlight poles as per tender terms,

conditions & Specifications & Scope of Work.

SITC of Post Top Lantern LED fitting having Luminaire Efficacy≥100 Lumens per watt comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

117 40.00 vertical mounting driver and accessories wired upto terminal block. 4,772.00 47.72 4,819.72 nos.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /Solid Aluminium conductor

118 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

Making trench in soft soil of suitable width of 90 cms deep from the final ground level or road level for

laying cable or locating the fault all over the run and backfilling the same & clearing the site by

removing debris & Shifting of the debris & making site good As per theInstruction of the Engineer

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any

size of cable or locating the fault all over the run and back filling the same and making the surface as

(B) If additional machinery like hammer driller or JCB use [Add]

Driling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply

122 20 by making Suitable size of holes at both ends complete. 407 4.07 411.07 Mt

(A) Up to 100 mm bore dia

STREETLIGHT POLE WIRE

Supply and Installation of 3.0 core x 1.0 Sq. mm Flexible Copper wire with required length from Junction

Box to Fixture, with needed all electrical mechanical accessories and tools to Commission the Streetlight

poles as per tender terms, conditions & Specifications.

FEEDER SECTION PILLAR TYPE-B -1

Supply, installation, Testing and commissioning of the Feeder Section Pillars

as per specifications, IS and Drawings.

The unit rate for each item shall include :Call for final inspection prior to dispatch. Delivery of the fidder

pillar / section pillar tosite. Shifting of the fidder / section piller from site to store to the suitable

location. Shifting & Fixing of Section Pillar. Assembly and wiringof component supplied separately.

Installation of section piller to including oldsection pillar. Earthing all components, frame etc. to a

common internal earth bar.M.S. Parts should painted with powder coating. Supply & fixing all

accessories and supporting structure.Supply & fixing of M.S. 40 x 40 x 6 channels for fixing the panels.

Connection, testing and commissioning. Checking of internal connection and wiring, operation of

switches, starter, MCCB, relays, contactors etc.Supply of neccessary tools, hardware, testing equipment

etc. Electrical contractor shall carry out the insulation test at site and all the readings shall be submitted

in duplicate to theconsultant or engineer-in- charge. Approval from state Electricity Board &Liason work

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable for mounting on surface of

foundation with GI foundation bolts, with required stiffeners welded with pole.

Providing & erecting approved make CFL out doors type Post top lantern / flying saucer type fittings

cast Aluminium / M.S. Powder Coated pole mounting type with BS lamp holder & Clear acrylic diffuser

with CFL lamp complete.

[B] With One No. retrofit 36 watt CFL

Bollards (a) LED Bollard fittings of minimum height 400 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate

160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt

128 3.00 Getting GEB/TORRENT CONNECTION Liasing Charges 15,000.00 150.00 15,150.00 NOS.