C/o Proposed Park ward no- 12 Near Dr. Bhatt clinic Paonta Sahib.

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock (Code No. 2.9)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth leve 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) (Code No. 4.1.8)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (Code No. 6.1.2)

Brick work with common burnt clay (modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6.

Providing form work with steel plate 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttring, and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 mtrs. and removal of the same for insitu-reinforcement concrete & plain concrete a) Foundations, footings, bases of columns, etc. for mass concrete (Code No. 5.9.1)

Suspended floors, roofs, landings, balconies and access platform (Code No. 5.9.3)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (Code No. 5.22)

15 mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand). (Code No. 13.2.2)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Cast Iron Decorative Flowers in Ralinig with welded in railing & Gate.

Finishing walls with Acrylic Smooth exterior paint of required shade.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

RAJENDER SINGH (BID ID -592801)

JAI SINGH (BID ID -598212)

MANOJ BHARDWAJ (BID ID -598035)

HIMACHAL TILES AND BRICKS (BID ID -598337)